How to create a hotspot on a laptop

Windows Service

Windows Services are applications that start running when the OS starts (if configured). There are some that may not be useful at all to the average user. But there are also important ones. For example, the WLAN autoconfiguration service. She is responsible for the operation of wireless networks and connections (Wi-Fi, Bluetooth, wireless display). As you understand, we need a service.

  • We need to open the Run window. This is done with the WinR keyboard shortcut.
  • We register services.msc, click “OK”.
  • In a large list of local services, we need “WLAN AutoConfiguration Service”.
  • Click on the desired line of RMB and go to “Properties”.
  • In the “General” tab, find the “Startup type” item and select the automatic startup option.
  • Save changes by clicking “Ok” and then “Apply”.

create, hotspot, laptop

  • In the column “Status” opposite the name of the service will appear the inscription “Running”.

Now we have smoothly approached the Wi-Fi hotspot setup.

Launch via a text interface

I know that there are special programs for distributing the Internet. Perhaps they can help make the virtual network easier. But we will start with the classic “old-fashioned” method.

Have you already understood what this is about? Yes Yes! Let’s talk about how to create a Wi-Fi hotspot using the Windows 10 text-based interface. Simply put, through the command line. Let’s try together.

  • We type netsh wlan set hostednetwork mode = allow ssid = Wi-Figid key = 123456789 keyUsage = persistent. Here you can give a name to the Wi-Fi point and register a network key. Here’s what happened: ssid is the name of our Wi-Figid portal, and key is 123456789 (you better think up more complicated). Then we click on the enter key.
  • As a result, we will see that the name and password have been changed and the wireless access point mode is allowed.
  • We fill netsh wlan start hostednetwork. Do you get a “Hosted network started” suggestion? This means that the network is working. Connect your gadgets.
  • You rejoice early. Something else is needed. So that home devices can access the Internet, let’s give them access:
  • Find the Internet connection icon among the icons in the system tray and right-click. We are interested in “Network Control Center”.
  • On the page that opens, click “Change adapter settings”. Select your wireless hotspot, right-click and go to its properties.
  • In the “Access” section, check the “checkbox” opposite “Allow other network users”. Here, select the network that you made (for example, we have it Wi-Figid).
  • Now you need to re-enable the created Wi-Fi network. But first, turn it off. We fill in turn:
  • netsh wlan stop hostednetwork;
  • netsh wlan start hostednetwork.

Now that’s all for sure. If you haven’t made a mistake anywhere, your home gadgets should be online. Check it out! In the list of available ones, find your own by name, enter a passphrase. If failed, restart PC and reactivate hosted network.

We use the capabilities of the OS

Now I want to please you. I know not everyone likes to work with a text interface. Therefore, I have such news for you. If Windows 10 on your PC was updated to version 1607, then it is possible to configure and open a Wi-Fi hotspot in just a few clicks!

Everyone guessed what I mean? Of course, about the Mobile Hotspot option! Let’s include already:

  • Click “Start” (the button with the Windows icon in the lower left corner of the monitor). Choose “Options”.
  • The “Settings” window will pop up, where we are interested in the “Network and Internet” section. You can get to this section even easier. Press WinI combination.
  • In the list on the left, look for “Mobile Hotspot”. Click.
  • If you want to name your network (home gadgets will see it) and come up with a unique passphrase, click Change. After entering the data, switch the wheel to “ON” where it says “Allow the use of my Internet connection”.

Here you can also see what devices are connected to the access point. Their IP and MAC address is displayed. You can connect no more than 8 gadgets.

There is a limitation for a mobile hotspot. Will not provide access for connection via PPPoE network protocol.


Of course, after completing the procedure once, you will do everything automatically. But, if you constantly need to distribute the Internet, take the advice. Create two files that will start and stop the created network.

Let’s start with the launch. Click on an empty space on the screen with the additional mouse button (right) and select “Create”. In the tab that opens, click on “Text Document”. Give it any name, but always with the extension.bat (for example, vkl.bat).

Click on the RMB shortcut and click “Change”. Type netsh wlan start hostednetwork in the text box and save the changes. By clicking on the shortcut 2 times, you start the Wi-Fi hotspot.

Following the same instructions, we create another file to disable. Just give the document a different name (for example vykl.bat) and store the text string netsh wlan stop hostednetwork in it.

Learning to manage

Having registered netsh wlan show hostednetwork, we will see the following:

  • the name of the wireless network;
  • type of protection;
  • the allowed number of clients that can connect at the same time;
  • current number of connected users.

To see the unique network key from the virtual Wi-Fi hotspot, enter netsh wlan show hostednetwork setting = security. In the User security key line, you will see the security key.

You can delete the created network with the text line netsh wlan set hostednetwork mode = disallow. This will remove the SSID and Network Key. To completely reset the settings, you need to edit the operating system registry. I do not recommend doing this without confidence in my actions.

Fixing problems

It is not always possible to do everything right the first time. Especially if you are doing this for the first time and through a text interface.

So what if the network won’t start? Try the following:

  • Go to the “Device Manager”;
  • There will be several tabs on top, we need a “View”;
  • A menu will open where you need to select “Show hidden devices”;
  • We are looking for the line “Network adapters” in the list and select the name, where the word Virtual will be;
  • Right-click and click “Engage”;
  • We move to the text interface and write the command to start the access point.
  • If any error occurs, first restart your PC. Second, check how you launch the text interface. Necessarily needed on behalf of the administrator. Third. check if the computer is connected to the internet.
  • Sometimes problems are observed when the antivirus program is turned on. Cut it out and run the commands again.

How to create a Wi-Fi hotspot on Windows 10: complete instructions

Greetings to our regular readers and subscribers, as well as the guests of the portal! What to do if a router breaks down at home? My favorite laptop is connected via fiber, but my mother also has a phone, my younger brother has a tablet, and my father has a work laptop. Need to come up with something.

Did you know that any computer or laptop running Windows 10 and earlier can make a Wi-Fi hotspot? Want to know the details? Then read carefully and repeat the instructions after me. I’m sure everything will work out!

How to change hosted network settings in Windows 10

In case you need to change some of the current parameters of the hosted network, such as the “SSID” (custom network name) or “Key” (network security password), you can use the following commands:

NETSH WLAN set hostednetwork ssid = Your_New_SSID

NETSH WLAN set hostednetwork key = Your_New_Passphrase

The variable values ​​after the equal sign (“Your_New_SSID” and “Your_New_Passphrase”) indicate the new name of the hosted network and the new security password, respectively.

How to stop sharing your Internet connection with other devices in Windows 10

If you want to temporarily suspend the access of other devices to the wireless connection on your personal computer, you must enter the following command in the command line and press the “Enter” key:

A message in the command line window will confirm the termination of the virtual connection: “The hosted network is stopped.”.

If you need to reactivate the virtual connection, you can use the initial version of the command at any time so that other devices can connect to the Internet using your computer as a remote access point without any additional configuration:

Likewise, you can also use the following commands for the procedure to enable or disable the wireless hosted network on your personal computer:

NETSH WLAN set hostingnetwork mode = allow

NETSH WLAN set hostingnetwork mode = disallow

How to share your internet connection on a hosted network in Windows 10

At this point, you have been able to successfully create and run a wireless hosted network on your personal computer in Windows 10. However, for now, no device that supports wireless connectivity will be able to access the Internet through your network. The last thing left for you to do is grant access to your Internet connection using the Internet Connection Access feature from your Internet adapter. Follow these steps:

Use the Windows X keyboard shortcut to open the main user menu and select the Network Connections section.

Then in the opened menu “Settings” in the left pane of the menu select the section “Ethernet” and in the right pane click the link “Configure adapter settings”.

A window with all available connections will open in front of you.

Then right-click on the icon of the network adapter through which you connect to the Internet. it can be either a traditional network adapter or a wireless network adapter. and select the “Properties” line from the pop-up menu.

Note. In the “Network Connections” section, you should see your new created virtual connection “Microsoft Hosted”, which is marked as “Local Area Connection X (numeric variable)” and has the name that we specified in the parameter of the name of the identifier “SSID” (in our case the virtual connection is named “Windows10pc”).

In the “Wireless Network: Properties” window, go to the “Access” section in the upper ribbon of tabs.

Check the box next to “Allow other network users to use this computer’s Internet connection”.

Then in the drop-down menu “Home network connection” select your created virtual connection (in our example, we selected “Local Area Connection 12”).

Confirm your choice and click the “OK” button to complete. Your changes have now taken effect.

At this stage, you will be able to see and connect any device that supports wireless “Wi. Fi” communication to an access point created using the software method, with unlimited access to the Internet.

How to check if your wireless adapter supports hosted network in Windows 10

Many computers today have hosted networking support enabled by default. But you still need to check beforehand if your computer’s Wi-Fi adapter supports this function. To do this, type the following command at the command prompt:

If the response in the command prompt window to the generated question shows a supported hosted network and says yes, then you have a modern adapter and you can follow the procedure to create a wireless access point. If your wireless “Wi. Fi” adapter does not support the ability to create such a network, then you can try using a wireless “USB adapter” that supports this function.

READ  Asus Laptop Won'T Turn On What To Do

How to disable wireless hosted network in Windows 10

As you can see, setting up a wireless hosted network in Windows 10 is not difficult at all. But Microsoft did not come up with a simple affordable way to delete the wireless network configuration if you no longer need it, which greatly complicates the task for the end user.

While you can use the “stop” or “disallow” commands to stop network activity, they will not completely remove network settings from your computer, they will only suspend it. If you want to completely remove the wireless hosted network settings in Windows 10, you need to modify the registry entries.

Important: Before changing any settings on your computer, it is worth noting that editing the Windows registry can be very dangerous, as such actions can lead to irreversible damage to your operating system if you are not sure of what you are doing or make a mistake Thus, before starting to modify the registry, we strongly recommend that you perform a full backup of your system, or at least create a system restore point. So you can protect yourself and fix the operating system in case of an error while working with the registry. Don’t neglect such a simple yet powerful protection option.

Open the “Search” panel and search for “regedit”, and in the table of output of search results, click the desired option.

When prompted by the system, give permission to open Registry Editor and click Yes. Be sure to open the “Registry Editor” from a user account with administrator rights.

Scroll down the slider in the left pane of File Explorer to the following address in the registry:

HKEY_LOCAL_MACHINE \ system \ currentcontrolset \ services \ wlansvc \ parameters \ hostednetworksettings

If you have installed the update “Windows Creators Update” or higher, then you can enter the registry address in the status bar under the ribbon of the main menu in the “Registry Editor”.

In the right pane of the Registry Editor, right-click the HostedNetworkSettings node, select Delete from the pop-up menu, and click Yes to confirm deletion of the setting.

Using the Windows X keyboard shortcut, bring up the main user menu and select the Windows PowerShell (Administrator) section. In the command prompt window that opens, run the following command:

Confirmation that you have successfully deleted the wireless hosted network settings will be the system message: “Not configured.” You can see it in the “Parameters” field of the “Hosted network parameters” section.

Make sure you turn off Internet sharing on the physical or wireless network adapter that is sharing Internet access with other devices. Use the Windows X keyboard shortcut to open the main user menu and select the Network Connections section. In the left pane of the “Options” window, select the “Ethernet” section, and in the right pane, select the link “Configure adapter settings”.

Right click on the network adapter through which you are connected to the Internet and select “Properties”.

Click on the Sharing tab.

Uncheck the box next to “Allow other network users to use this computer’s Internet connection”.

Click the “OK” button to confirm the completion of the process.

How to create a Wi-Fi hotspot on a Windows 10 computer

Read How to Turn Your Personal Computer into a Wireless Hotspot Using Windows 10’s Hosted Networking Feature.

Windows Wireless Access Point

Microsoft has incorporated a wide variety of features into the Windows 10 operating system and is continually working to improve it. Improvements are made regularly, but there are features that were developed for Windows 7 and remain available in Windows 10 in a more improved form. One of these features is the ability to turn your personal computer into a wireless access point. The main condition for creating a wireless Internet access point is the presence of a “Wi. Fi” module on your personal computer or laptop. If there is no such module, then you will not be able to complete your plan.

If you connect to the Internet using a wireless or wired adapter, similar to previous versions, Windows 10 allows you to share your Internet connection and provide an access point to other devices using the Hosted Network feature.

Hosted Networking is a feature included with the Netsh command line (short for Network Shell). It was previously introduced in Windows 7 and allows you to use the operating system to create a virtual wireless adapter. what Microsoft calls “Virtual Wi-Fi” and create “SoftAP”, which is a wireless access point created by using programmatic methods.

By combining these two elements, your computer can connect to the Internet (be it an Ethernet connection or a Wi-Fi adapter) and share it with other wireless devices. essentially acting as a wireless hotspot.

In this article on how to create a wireless access point and Internet connection in Windows 10, we will tell you:

  • how to perform a system check to see if your network adapter supports this feature;
  • how to set up and enable a wireless hosted network;
  • how to disable it and remove settings from your computer when you no longer need this feature.

In order to start the process of creating a wireless access point, you need to open the “Command Prompt with administrator rights”. To do this, use the keyboard shortcut “Windows X” and in the main user menu select the section “Windows PowerShell (administrator)” (“Command line (administrator)”).

Confirm your choice by clicking the “Yes” button in the User Account Control computer security pop-up message, thereby allowing the application to make changes on your device (“Windows PowerShell” was developed by the verified publisher “Microsoft Windows”).

Things you need to know

Although the wireless hosted networking feature in Windows 10 allows you to implement an access point solution to share your Internet connection with other devices, it cannot be a complete replacement for a physical wireless access point.

In addition, there are several things that you should consider. For example, the wireless speed when creating a hosted network will be significantly slower than the speed that a direct connection to an Internet access point provides you. You may not experience much difficulty with regular Internet browsing or social networking, but watching large video files, downloading or transferring large files can be a serious problem for some users.

You also need to consider that your computer must always be turned on in order to act as a wireless access point to the Internet. If the computer goes into sleep mode, hibernation mode, or you restart it, then your wireless access point will stop working and you will need to manually restart this function using the command:

There is also another unpleasant moment, which is that you cannot simultaneously run two types of connection “SoftAP” and “ad hoc” in “Windows”. If you need to create a temporary network connection between two computers, setting up an “ad hoc” connection will disable “SoftAP”. you can start one or another type of connection, not both at the same time.

Modes of operation of devices in Wi-Fi networks

Signal transmission without using wires is performed via radio channels. To perform the required actions, a special-purpose device is used. a router.

But if it is not possible to use it, then the best option would be a laptop as an access point. The functioning is carried out in two directions:

  • Ad-Hoc mode. Users will receive direct contact, excluding foreign objects from the chain.
  • Infrastructure mode. Information transfer between equipment is carried out using a client-server assistant.

Parallel operation in several directions is impossible. By using a laptop with built-in circuitry, you can eliminate unnecessary details and make it easier to access the Internet.

For the smooth functioning of all facilities, you must have:

  • operating system Windows 7 or higher;
  • USB Wi-Fi adapter;
  • network contact.

If you meet the requirements and have all the listed items at your disposal, you can start adjusting the access point from your laptop. This process is quite simple and does not require any special knowledge or skills. The subscriber faces a task. checking the condition of the converter on the gadget, and also have access to the Internet.

Laptop as a Wi-Fi hotspot on Windows 7, 8, 10

In order to freely access the World Wide Web, you need to do some manipulations. connecting to a wireless network. For Windows 7, the process is the same as for operating systems 8 and 10.

There are several options for how to create a WI-FI access point. These include:

  • Standard. One of the simplest and most affordable options. To implement it, you need to enter data into the command line.
  • Hotspot launch with Virtual Router, Maryfi and others.
  • Mobile hot spot. This option is only suitable for OS 10.

Having done all the actions correctly, you can get access without much effort.

Creation of Virtual AR

Such a system makes it possible to synchronously operate several adapters using the source of one device. The peculiarity is that it can function in two directions: client-server and point-to-point.

Installation of Virtual AR on gadgets with Windows 8 and 7 will be carried out according to the same scheme. This is explained by the fact that command lines are used for configuration, which have the same form. The whole scheme consists of the following stages:

The “Start” menu opens and from the proposed list you must click “All Programs”. After that, you should go to “Standard” to the entry “Command line”. Using the touchpad or mouse, you must select “Run as username”.

In the open menu, there is a column where the request is made. The following is required: netsh wlan set hostednetwork mode = allow ssid = “” key = “password” keyUsage = persistent. If a malfunction is knocked out, then you should check the correctness of the data, and repeat again.

After adjustment, the startup process begins, the basis of which is “netsh wlan start hostednetwork”. Manipulations are carried out after each launch of the device.

To get acquainted with the configurations, they resort to the phrases: netsh wlan show. guarantees security, hostednetwork setting = security netsh wlan show settings. required for smooth connection.

To understand what we are talking about, it is suggested for acquaintance: the name, password. a cipher that protects against intrusion. It consists of 8 characters.

All data must be entered using the English keyboard layout. An error may occur. In this case, you need to find the automatic setting and check its status.

If it is disabled, then the following sequential actions are carried out: properties → startup type → automatically. At the end of the steps, you should return to the connection process.

A laptop as a wi-fi access point is used when Virtual AP is enabled and correctly configured. For the described OS, this process is similar, but there are still some differences. For OS 10, the following items are performed:

Opening a command line. To do this, you can use the menu, which is called using WinX.

As for OS 7 and 8, a query is written in the line, after which you must press Enter.

After that, you should carry out the manipulations that were described above. If there are problems with the launch of virtual access, then the configuration is carried out according to the previously proposed scheme.

READ  Enter BIOS On Lenovo Laptop

Apple products can be separately noted. For MacBooks, setup also needs to be done. The difference from Windows is the need to use a modem.

  • Connecting a cable or modem to the gadget.
  • Opening System Preferences and Going to Sharing.
  • In the “Connection” field, those connections are used that are necessary for work.
  • Wi-fi is selected. A name and password are given. The maximum number of characters for entering the code is 12.
  • After that, you should put a checkmark next to “Shared Internet”.

Now the laptop is how the access point will distribute the Internet. Other devices are connected to it. To connect, you must enter the correct password.

The whole procedure does not take much time. If you correctly configure the virtual network on OS 7 or 8, then there will be no problems with Windows 10. Following the described steps, you can access the network without using a router or other devices.

Virtual AP creation using third-party software products

If there is no desire or ability to configure a virtual network, then you can use other methods. Such programs greatly simplify the setup process. One option is to use a utility. The advantage is that you do not need to activate after starting the computer or exiting sleep mode.

With a no-cost Virtual Router Manager, the setup process takes a little time. The main actions are:

  • name introduction;
  • installation of a security key;
  • specify interface with Virtual AP base.

At the end of the entry, “Start Virtual Router” is selected. In addition, it is suggested to pay attention to the applications MyPublicWi-Fi, Wi-FiCreator. Activation is carried out according to the scheme proposed above: username and password.

Possible errors when starting a virtual Wi-Fi network

There is a possibility of problems when connecting to a laptop for study. Wi-Fi itself works the same on devices, regardless of the distribution method. Also, work will not be affected by the use of a laptop or desktop computer.

To find out the reasons for the lack of connection, it is recommended to first try to connect. There is a chance that everything will work out the first time. If this does not happen, then errors are considered:

Stopping the launch of the access point in the OS.
2. Distribution of a signal is in progress, but access to the Internet is limited.
3. The machines are connected to the proposed network, the web page does not load.

The first problem is the most common. The solutions depend on how the inclusion process takes place. The main reasons are: the lack of a built-in adapter or driver for it, support at startup. The grounds for errors on Windows 10, 7 or 8 are the same.

Limited access is also one of the common problems. It is quite simple to solve it. The connection may be stopped by an antivirus program. It is necessary to turn it off, and an access to the network will appear.

The reason for the third error is that there is no general connection to the Internet. To troubleshoot, you need to open access, after which it will be possible to access the World Wide Web, sites and web pages will load.

Before setting up access, you need to make sure that the device itself has access to the Internet.

How to create a Wi-Fi hotspot on a laptop with Windows 7, 8, 10: 4 main steps

There are times when there is no way to distribute the Internet in the usual ways. through a router, and you need to get access to the network quickly and urgently. Then we propose to create an access point.

What is the use of a laptop as an access point?

In a person’s life, unforeseen situations may arise: breakdown of the signal transmitter, lack of contact, or other malfunctions. This limits the actions required for work, stops the transfer of the necessary information to the work laptop.

Creating a database will help to cope with the problems that have arisen. Using the device as the main part, carrying out sequential operations correctly, it will be possible to connect to the Internet.

See “How to create a Wi-Fi network yourself”.

How to create a hotspot on a laptop

In our time, modern gadgets have become very affordable and technologically advanced. They have several data transmission modules, including Wi-Fi. Such a module allows you to connect to the worldwide network and even connect several modules at the same time.

Configuring an Access Point in Windows 8

Setting up an access point in Windows 7

Creating an access point using programs

The connection issue is solved by the necessary software. Download one of the special utilities.

Creating an access point using standard Windows 7, 8, 10 tools

This option is possible due to standard Windows capabilities. The procedure is almost the same, so let’s look at the instructions using the example of “Seven”.
Click on the WinR icon, write cmd in the search and open a special window, where we carefully write

netsh wlan set hostednetwork mode = allow ssid = ”New Name” key = ”New Pass” keyUsage = persistent.

Using the Latin alphabet, enter the name of our network (instead of New Name) and the password (instead of New Pass). At the end, we confirm and wait for a message that the procedure was successful. To start, we use a text phrase

netsh wlan start hostednetwork

In response, a text about the successful completion of the process will appear. Now go to the Network Connection Center and find the home network connection icon or “Ethernet”. Turn on the context menu with the target and select “Properties”. Now we allow other users to use Internet access by selecting the new network connection “Wireless Network 2″ in the second tab and confirm by clicking “OK”.

Notes for newer versions of Windows 8, 10

The command line is launched by right-clicking on the Windows icon in the corresponding item. We select launch in admin mode.
In network connections, the network you created is displayed “Local Area Connection 2”. Instead of the number 2, there may be another.

When we use the command line, after restarting the laptop, we need to do the same operations. You can simplify your life by saving the necessary settings to startup.
Open notepad and copy the text phrase

netsh wlan set hostednetwork mode = allow ssid = ”New Name” key = ”New Pass” keyUsage = persistent
netsh wlan start hostednetwork

and edit the username and password according to the above instructions. Save the text file and write “.cmd” at the end of the name.
We go through Start to Startup and copy the created file there.

Notes for newer OS versions

Startup is opened by pressing the “Win” “R” keys and entering the text shell: Startup. After that press “Enter”.
Also pay attention to the control command netsh wlan start hostednetwork. start distribution. Replacing the word start with stop will stop the distribution. netsh wlan set hostednetwork mode = disallow. destroy the distribution (to re-enable, you need to create the access point again)

Setting up an access point in Windows 10

We’ve looked at a variety of Wi-Fi sharing options. I hope you will find the best and most comfortable way for yourself, because both the manual method and the software one have their advantages.

How to create a wireless Wi-Fi local area network between two computers, a computer and a laptop, a laptop and any other wireless device: a smartphone, a tablet, a TV with an integrated wireless module without a separate wireless access point?

In this article, we will write “on fingers” how you can create a Wi-Fi access point on a laptop with a minimum baggage of computer knowledge “on board”.

Determine the scope of application of the created Wi-Fi access point on a laptop

  • Situation: Your laptop connects to the Internet via a cable (wired connection via a router, home network). Wi-Fi is not configured on the router or does not work. Task: connect to a laptop and access the Internet through it.
  • Situation: The laptop has files that need to be copied to a Wi-Fi-enabled mobile device. UPD. This article was written a long time ago. Back then, there was no way to send files to mobile devices using popular applications. It is quite easy to do this now. Even the Telegram messenger has such a function.

As a solution to such problems, you can adapt a wireless access point (Wi-Fi Hot Spot), which can be created on a laptop in a matter of minutes. All you need is a laptop with a working Wi-Fi module and correctly installed drivers.

You can repair and customize a laptop of any brand in our company. It is also advisable to make sure that there are no viruses in the operating system before configuring. Viruses often interfere with wireless networking.

To create a local wireless Wi-Fi network between two computers with the ability to access the Internet through one of them, which will be connected to the Internet via a LAN wire (regular network cable), you need to go through several stages. They are quite simple. the main thing is to understand the principle and strictly follow the settings.

  • Stage. we create a virtual network adapter on a Virtual Wi-Fi laptop that will broadcast the wireless network and the Internet.
  • Stage. set up Internet access. We implement the principle of a full-fledged laptop-based access point.

Create a Wi-Fi hotspot on a laptop

Stage 1

The first step begins with the fact that on a laptop, which will become an access point and to which any wireless device can be connected, we will create a Virtual Hotspot.

To do this, run the cmd command with administrator rights.
In the console that appears, type manually or copy the line: netsh wlan set hostednetwork mode = allow ssid = “MS Virtual Wi-Fi” key = “Pass for virtual Wi-Fi” keyUsage = persistent

Where ssid is the name of our created network, and the key value is the password for the connection, choose it yourself (8. 63 ASCII characters). For example values ​​of type: erQ564U0. In our case, we get the following line, which we enter into the console:

netsh wlan set hostednetwork mode = allow ssid = “MS Virtual Wi-Fi” key = “erQ564U0” keyUsage = persistent

As a result of our actions, another wireless device should appear in the laptop. Microsoft Virtual WI-FI miniport adapter.

This is a virtual wireless adapter. It is created as a separate device for broadcasting the network, since the use of one adapter for several purposes is not encouraged in Wi-Fi technology. While our network has been created, but is in an inactive state.

Important: if a new wireless device called Microsoft Virtual Wi-Fi miniport adapter does not appear in the device manager, then there is a problem with the Wi-Fi module driver. download and install the original driver. Otherwise, the network will not work.

To activate our wireless network, start the console again with the cmd command with administrator rights. Enter the following values ​​in it:

By analogy, in order to stop the network if necessary, we type the command:

All of these commands are best formatted as bat files for quick launch as needed.

After starting our network via netsh wlan start hostednetwork. another Wi-Fi network will begin to be detected in our premises.
You can check the presence of the network created by us by going to the network search and connection menu, for example, a smartphone on Andoid OS (Settings-Network-Wi-Fi Settings-Enable WI-FI-Wi-Fi Networks).
You can connect to it by clicking the “Connect” button in the list of available networks and entering the password that we set when creating the network. In our case, this is erQ564U0.

READ  RAM For Acer Aspire Laptop

The stage has been completed. Password protected Wireless SoftAP created and ready to use.

Stage 2

At this stage, we need to access the Internet through our laptop-based software access point. To do this, we need to share (make open) the access of the wired LAN network adapter on the laptop.

This is done like this:
We go to the Control Panel. Network and Internet. Network Connections. We find the network adapter, in our case it is: LAN connection. Atheros AR8162 / 8166/8168 PCI-E Fast Ethernet Controller. Right-click on the adapter icon. Properties. Access. Put a checkbox: Allow other network users to use the Internet connection of this computer. You also need to indicate specifically which adapter we give access to the network in the drop-down menu just below (Home network connection). Here you need to specify our newly created virtual network. In our case, this is Wireless Network Connection 2.

Click the OK button to save the parameters. The network should immediately start distributing the Internet without rebooting. The network configuration on a laptop that distributes the Internet should look like this. the network we created should be with access to the Internet.

Important: the created network must be started after each restart of the Windows operating system. Those. write netsh wlan start hostednetwork in the console. And this is tedious to do over and over again. To avoid this, you need to create a bat file (.bat) and display its shortcut on the desktop for maximum convenience.

Ready bat files can be downloaded below:
Start wireless Wi-Fi network. start_bat.
Stop. stop_bat.

It is possible that the Internet in such a network will work a little slower. this is a payment for more complex routing. It should also be noted that you can configure a wireless Wi-Fi router automatically using special software.

Mobile Hotspot (Windows 10 only)

In the tenth modification of Windows, a WI-FI access point is created even easier. For this, the system itself has a unique tool called a hot spot.

The easiest way to get to its parameters is through the menu invoked by the usual click on the notification icon located in the right corner of the system tray. But this will only be the inclusion of distribution. If you need to change the parameters, right-click on the tile itself and go to the corresponding settings.

Generally speaking, you don’t need to change anything in the options. You can only give permission to turn on remotely or change the access password that the operating system generates on its own.

Using the command line

And first, let’s see how to create a WI-FI access point through the command console. It goes without saying that it is initially necessary to run it exclusively with administrator rights. In Windows 7, you can use the “Run” console and the cmd command using the start item with administrator rights, create the corresponding task in the “Task Manager” or run the executable file cmd.exe through the PCM from the System32 folder.

In the tenth modification of the system, you can use the PCM menu on the “Start” button or search and select the appropriate type of launch.

After that, enter the command shown above in the console, where NAME is an arbitrary name of the access point (network), XXXXXXXX is the password invented by the user to enter.

The next step will be to enter the command of another command, just activating the distribution directly.

After its completion, the stationary terminal or laptop will immediately begin to distribute the signal, but it is not yet possible to connect to the distribution from other devices.

At the next stage, in order for the WI-FI access point to become available for other devices, you need to open public access to it.

This is done in the network connections section, where the properties of the created connection are selected, and on the access tab, the necessary permissions for connecting other users are marked.

If for some reason you need to stop the distribution, a command similar to the above is entered in the console, only with the stop operator instead of start. The very first command can be reused in cases where you need to change the network name or password.

Connectify app

The WI-FI access point in this program is no less simple to create. Most interestingly, this application can emulate both an access point and a physical router even in its absence.

All procedures are reduced only to set the connection name, password and press the button to activate it (Start Hotspot).

Note: for the application to work correctly, the.NET Framework version of at least 3.5 must be installed in the system.

Popular third-party utilities

Now let’s see how to make a WI-FI access point using third-party programs specially created for this. A lot of such applications have been developed today, however, among the most popular and simplest are such software products as:

  • Switch Virtual Router;
  • Connectify;
  • Virtual Router Manager;
  • MyPublicWi-Fi and others.

Possible errors and the simplest methods of their elimination

As for errors and failures, when it is impossible to connect to the created point, to begin with, just restart the distributing computer, and at the same time check if the wireless adapter itself is enabled (both physically and in the “Device Manager”). If the adapter doesn’t work, try reinstalling the drivers. If the created point works, but it is impossible to connect to it, disable the antivirus and firewall and check the connection. In the case when there is access, but the sites do not open on the Internet, check if the Internet is available on the distributing terminal and if public access is set for the distributing adapter.

What is a WI-FI access point in Windows 7 or other OS

As already clear, an access point in this case is understood as a “hardware” device or software module that has an Internet connection and is capable of transmitting a wireless signal in order for other devices to use it. In fact, a stationary computer or laptop plays the role of a router, of course, provided that they have a built-in or connected external Wi-Fi transmitter. However, a laptop as a WI-FI access point can both receive and distribute the Internet. In this case, it turns out that the terminal also acts as a repeater.

It is not necessary for the dispenser to have only a wired connection. You can equally well use a wireless connection via a router or 3G / 4G. But why then turn the same laptop into another router? Quite successfully, such manipulations are used in situations where the router sends out too weak a signal. Similarly, it is quite elementary to increase the number of simultaneously connected devices, one part of which will access the Internet through a router, and the other through a computer terminal or laptop. Of course, it doesn’t look very convenient, especially in terms of using different passwords for connections. But who’s stopping you from using the same combination for access? over, it is set arbitrarily when organizing connections of this type.

Switch Virtual Router

This small application, by and large, is a tool that duplicates the capabilities of the operating system itself, but in a sense, simplifies their use.

In the running application, you first need to go to the basic settings by clicking the button with the gear image in the lower right corner, and enter the necessary data there (network name, password, etc.). After saving the settings in network connections, a new connection will appear (not yet active). In the main window of the application, you now need to press the start button, after which the connection status will change. To enable the distribution of the Internet through the menu of the connection icon in the system tray, you need to select the adapter used and enable sharing for it.

Checking network support

Before creating a WI-FI access point on a Windows laptop, you need to make sure that the computer system has an appropriate adapter and its drivers are installed correctly, which provides support for the hosted network being created.

You can check these parameters on the command line by entering the line shown in the image above. The support field must be set to Yes. If the user sees a negative answer there, you need to reinstall or update the device drivers. In this case, it is advisable not to use Windows tools (“Device Manager”), but to re-install or update using special programs like DriverPack Solution or Driver Booster. If a specific adapter from a little-known manufacturer is installed in the system, and the corresponding driver is not found by the above applications, you can use the search for the necessary control software by special identifiers VEN and DEV, which can be found in the hardware ID on the information tab in the adapter properties called in the “Manager devices “.

Having copied the longest line with identifiers, which specifies the information on the device to the greatest extent, you need to paste it on a special site with drivers in the search field, and then download and install the required driver yourself.

Table of Contents