How to connect Wi-Fi on a Samsung laptop

How to turn on WI-FI on an Asus laptop

If you have an older Asus laptop, it may be equipped with a conventional mechanical switch that activates the Wi-Fi module on the device. Therefore, simply slide this switch to the “on” position. If you have a newer model, you can enable the ability to search for wireless connections with a combination of buttons. Again, depending on the laptop model, the power button may be different. The main thing is that you need to look for it in the row of service buttons at the top of the keyboard. Such a button will be indicated by a working antenna transmitting a signal. It could be F2 or F10. These buttons should be used in conjunction with the Fn key.

Installing Wi-Fi Drivers

It so happens that after reinstalling the operating system and trying to activate the Wi-Fi module using the buttons, nothing happens, and there is no trace of connection. How, then, turn on WI-FI on a laptop? It is likely that the problem lies in the drivers for the module. During the installation and configuration of the operating system, it was not possible to select and correctly install a new driver.

First, you need to determine whether the device required for the remote connection is installed on the laptop. For this you need:

  • Access the Device Manager by going to the properties of My Computer;

connect, wi-fi, samsung, laptop

  • Select the Network adapters tab;
  • Find a device in it, the name of which will reflect the essence of the wireless connection. It can be an adapter with the word Wireless or something similar.

If you visually find the adapter, and it does not display with errors, it looks like the drivers are fine, it’s just turned off, or there are currently no networks to connect to.

If the adapter is absent in the list or is displayed with errors, it all boils down to the fact that the driver is not installed on it, or is not installed correctly. In both cases, it is not possible to establish a high-quality Internet connection. To connect Wi-Fi on a laptop, you need to install a driver. You can always find it on the disk that came with the device, or unload it from the manufacturer’s official website, transfer the driver using a USB flash drive, and then install it.

If you are looking for a driver on the Internet, it is important to note that you need to specify the exact name of your laptop in order to download the exact file that you need. Enter all letters, numbers and symbols that appear in the title.

After installing the drivers, try connecting to a wireless network. If it does not work, restart the router. most likely the problem lies in it.

This method boils down to enabling the module in the Network Connection Center. You can get to this menu by clicking Start, but you can also use the Win R key combination. A command line will pop up in front of you, in which you need to enter ncpa.cpl. This request will display the desired control center, where all active and inactive connections for different types of networks will appear.

From the proposed options, you need to find a Wi-Fi connection on a laptop. If the item you want is indicated by a pale gray color, then it is disabled, which makes it impossible for a wireless connection to be available on the device. To activate it, you need to call the context menu by right-clicking on this device and select “Enable”.

Further, you can safely try to connect to available wireless networks.

How to set up Wi-Fi on a Windows 7 laptop

Depending on the operating system that is installed on your laptop, there may be different problems with establishing a wireless connection. And it often happens that the laptop does not connect to WI-FI in Windows 7.

Let’s consider several options for how to fix this problem.

To begin with, you have a wireless network available to connect, but the laptop won’t establish a connection. We find in the Taskbar, located in the lower right corner, the icon denoting the network, and click on it with the left button of the manipulator. A menu will appear in front of you, in which all available wireless networks will be displayed. From the list provided, select the network to which you want to connect at the moment.

After selecting the network, a window for entering the password will appear. After filling in the field, the connection process will begin, which may take 1-2 minutes. If everything is correct, then a wireless connection will be established, and you can use the Internet on your laptop without any problems.

Another option that will enable Wi-Fi on a laptop will be of interest to more advanced users, since it involves more actions. But with its help, it becomes possible to manually fill in some data that relate to the connection.

To use this option, you should go to the Network Settings section located in the Control Panel, and then go to the settings of the new Internet connection. After the dialog menu opens, you need to select the manual configuration option. Further, in a new window, you will be able to assign a name to the access point, select the type of security, type of encryption and assign a new password for the connection. When all the required fields are filled in and the settings are saved, the newly created network will appear in the list of available ones, and you can connect to it.

How to turn on Wi-Fi on an HP laptop

Although the activation of the wireless adapter is the same on most laptops, many users are wondering how to enable WI-FI on an HP laptop. Most of the devices of this American manufacturer are equipped with a special button that activates the Wi-Fi module. In some models, it is presented as a special slider, and is additionally equipped with an indicator that lights up when Wi-Fi is on. If there is no such slider, the button should be found in the row of function keys on the keyboard. most often next to the F12 button. It is indicated by the logo of the antenna transmitting the signal.

In other cases, Hewlett-Packard notebook computers enable the wireless module by software or hardware, as described above.

How to turn on Wi-Fi on a laptop

Without the Internet, any laptop today is nothing more than a typewriter or a large calculator. Fortunately, every modern device is equipped with a built-in Wi-Fi adapter for high-speed Internet access. But what if, having bought a new laptop, you cannot connect to the router and take advantage of all the delights of the Internet? You need to understand the system settings and create a connection yourself. Consider the most common ways to connect a laptop to a router, methods of changing network parameters in Windows 7 and 10 operating systems.

The next method, how to connect a laptop to Wi-Fi, is similar to the first one, however, it requires going to the Device Manager. By right-clicking on the My Computer icon and holding down Properties, you will see the Device Manager submenu. Having opened the device tree, you need to find the one that is responsible for the wireless connection in the Network adapters menu. Most often, it is marked with WI-FI, Wireless or the like. It also needs to be activated, after which you already try to establish a wireless connection with existing networks.

READ  How to connect Samsung to computer via USB

Checking the connection status

Check the status of the network connection:

  • Open the “Run” window with the WinR key combination and enter the command cpl.
  • In the new window, check the status of the wireless connection. If it is disabled, enable it with a double mouse click.
  • If connected, great. Check network performance. If it does not work, activate Wi-Fi with a key combination. In Windows 10, by clicking on the Internet icon (in the tray), Wi-Fi may not be active. Click it to enable network search.
  • If not, there is probably a problem with the drivers and need to be installed / updated.

Installing Drivers

To update, install, or reinstall the wireless adapter drivers:

  • Right click on the icon, select “Status”. “Information”. Pay attention to the line “Description”. It indicates the model of the Wi-Fi adapter.
  • Then press WinR and run the command mmc devmgmt.msc.
  • In the open device manager, find in the “Network adapters” section the line with the name of your Wi-Fi module and go to “Properties” through the context menu.
  • Click update / install driver.
  • Select updates manually.
  • It is recommended to search for firmware and transfer them to your computer from the official Samsung website, specifically for your model. Additionally, they can be found on the disk (if one came with the laptop). Go to Samsung.com and enter your laptop model number.
  • Select the latest available drivers for your installed and supported operating system.
  • In the device manager, select the path to the distribution folder. Or run the firmware installation via the exe file.
  • After reboot the device and check the Wi-Fi operation.

For many older Samsung laptops, an adequate transition from Windows 7 and 8 to Windows 10 is not organized. Wi-Fi drivers may not provide full Internet access or there will be frequent failures.

If the problem is observed, you can do this:

  • Through the “Device Manager” search for drivers from the Internet (or rather, according to the Microsoft driver base) and, if successful, install a “like-minded” new driver for the adapter.
  • Roll back to Windows 7 and use it.
  • Buy a new external adapter compatible with Windows

What is a Wi-Fi adapter and how to choose it, our Blonde told here.

Shortcut keys

If Wi-Fi used to work, but is not available now, use one of the key combinations to activate via Windows settings:

  • Fn F12;
  • Fn F2;
  • Fn F5;
  • Fn F9.

These buttons are usually labeled with the Wi-Fi icon. Sometimes there may be an indicator on them that lights up if Wi-Fi is ready to work.

If there is no label and no effect is observed after pressing a couple of seconds later, look for a mechanical button / toggle switch on the edges of the laptop. It can also be used to connect Wi-Fi on a Samsung laptop.

If the buttons do not give the desired result, go back to the program part.

How to turn on Wi-Fi on a Samsung laptop: from keys to drivers

Samsung laptops are equipped with Wi-Fi adapters for wireless connection to access points. When you turn it on for the first time, after accidentally deactivating the chip or reinstalling Windows, among laptop owners, the question becomes: how to enable Wi-Fi on Samsung devices?

General instructions for laptops are as follows

You can enable Wi-Fi on a Samsung laptop hardware (toggle switches, key combination) and software (through the network connection settings). If the adapter is not configured to work, the software is most likely to blame and needs to be installed or updated.

Laptops over 5 years old may experience networking problems on Windows 10 as support for official drivers has long been discontinued. You can get out of this situation by purchasing an external Wi-Fi adapter with a USB connection.

Method 1

This method consists in using a center dedicated to managing network access. To start a device that connects a laptop to Wi-Fi, the user should use the WinR combination, and then, when the window opens, type “ncpa.cpl”.

This request will call a section that allows you to change the connector parameters.

Attention! In older XP versions, this item is designated differently: you need to find a section for connecting a network type.

In the section, the user needs to find a column / option that gives information about the connection to the network, which belongs to the wireless type. If this column is gray, the element connecting to WI-FI is disabled. To start its functioning, you need to click the button on the right side of the mouse and assign the option intended to be enabled. After that, you should try to connect to an available network.

Turn on wireless connections with laptop buttons

Some versions of technology, equipped with an element that makes it possible to use wi-fi, require its separate activation: not every device assumes an automatic start of the wireless network. Some devices involve the use of two keyboard buttons, some are supplied with one key for adapter launch. On older versions of laptops, there is an independent button on the body, and not on the keyboard, made in the form of a slider.

If the user has examined the lining of the laptop, but did not find the stand-alone slider, you should take a closer look at the keyboard. As a rule, to turn on the transmitter, which allows you to join the wireless network variety, use the function buttons F (from the first to the twelfth).

You need to look at the symbols drawn on these keys. One of these keyboard elements has an “embossed” Wi-Fi icon made in the form of an antenna.

Important: to connect to the Internet, which is a wireless type, the FnF5 combination is more often used, so you should first look at these keyboard elements.

Turn on Wi-Fi programmatically

If the above methods failed to enable the element designed to connect to the network without wires, the adapter may have been disabled by software. it was disabled in the operating system options. The user can launch the adapter using the classic Windows settings in two ways.

Checking and installing drivers on Wi-Fi

If the user installed the operating system and connected to Wi-Fi by combining the necessary buttons or finding a separate one, but the connection did not work. all the “salt” is in the driver. The operating system could not find and install the correct driver for the built-in receiver.

To find out if the utility needed for Wi-Fi connection is installed, the user needs to enter the manager displaying these programs, and see if the notorious utility is there.

Important: to enter the manager, right-click on the manipulator on “My Computer” (or enter this folder, and then click on an empty space) and select the section that will display the properties. Find the desired tab in it.

In the manager showing tabs for connected devices, find the one showing network type adapters. If the adapter is visible, then the driver is there, it is simply disabled or there are no grids to which the user can connect.

The user did not find any devices for wireless connection? There is no driver, so you need to install it. Find the disk that came with the laptop and install the desired version from it. Another option is to download from a site that belongs to the manufacturer.

READ  What to do if the laptop gets too hot

Remember: when searching for the required driver on the site, indicate the exact name of the laptop model, for example, Lenovo Yoga 920-13IKB. If necessary, indicate the OS version installed on the laptop.

When the driver is found and downloaded on your laptop, click on the file downloaded to your laptop and follow the suggested installation tips.
If the utility is installed, but the wireless Internet does not work, you should check for the presence of networks available to the user, and also restart the router. Didn’t these manipulations work? Reinstall or download driver updates.

How to turn on WI-FI on a Windows laptop?. 5 proven ways

Each of the latest laptops has a built-in connector that connects to Wi-Fi. But what if you turn on a brand-new laptop with an operating system installed on it and connect to a router to receive a connection fails? You need to “browse” the settings by connecting the Wi-Fi itself. We will look at the classic methods of checking the ability of an adapter mounted in a laptop to connect and present ways to help change the Wi-Fi settings, configure it, in the operation of versions of Windows 7-10.

Setting up WI-FI on a laptop with Windows 7

In the seventh version of Windows, the steps required to configure Wi-Fi on a laptop are similar to those in the newer series described above.

Method 2

This method assumes the use of a manager, which is designed to monitor the operation of devices. In the manager, the connectors are disconnected infrequently: usually the termination of the functioning of the connector is caused by a malfunction of the laptop (especially inexpensive, but convenient models like ASUS X515MA-EJ013).

Important: if the Wi-Fi connector built into the laptop is turned off, then the icon corresponding to the wireless connectors will not be visible in the column displaying connections related to the network type.

To enter the dispatcher, the user should press WinR on the keyboard that is built into his laptop. In the window that opens, for execution, you need to drive in devmgmt.msc and confirm the request.

When the dispatcher window opens, in the graph displaying adapters, find the one whose name suggests “Wi-Fi” or “Wireless”.

Then you need to select the option in the menu that uses the connector: it is invoked by right-clicking the touchpad on the name of the device.

Attention! If you get an error at startup, check the drivers: they will have to be reconnected, updated or reinstalled.

How to turn on Wi-Fi in Windows settings

If the specified procedures did not help and you are still wondering How to turn on Wi-Fi on a laptop? you need to check if Wireless Network Connection is enabled in Windows settings. To do this, you need to go to the Network and Sharing Center. One way is to right-click on the network icon in the lower right corner of the screen and select “Network and Sharing Center”.

Then click “Change adapter parameters”.

Another way to use hotkeys is to type the command ncpa.cpl and press Enter.

It doesn’t matter which of the methods you used, the result will be one. the Network Connections window will appear on the monitor. Next, you need to find a wireless connection, right-click on it and select “Enable” (if the Enable option is not available, then the Wi-Fi network is enabled).

Enabling Wi-Fi via Windows Device Manager

If your Wi-Fi adapter is still not enabled, you need to check if it is enabled in the task manager. To do this, click the Start button, right-click Computer and select Manage. In the left menu select Device Manager.

Or press the keyboard shortcut in the search bar type the command mmc devmgmt.msc and press Enter.

The Task Manager window will open, then select “Network adapters”.

If the adapter icon is marked with an arrow down, it means it is disabled, in order to enable it, right-click on it and select “Enable”.

Turn on Wi-Fi in Windows 7

Let’s now figure out how to manage the wireless adapter in the operating system itself. Let’s start with the most important. And most importantly, it is an installed, correctly working driver for Wi-Fi (Wireless adapter). If there is no driver, then no matter how hard we try, we will not be able to turn on Wi-Fi. But first things first.

First, let’s check if our Wireless Network Connection adapter is enabled. To do this, right-click on the Internet connection icon (in the lower right corner), and select Network and Sharing Center. On the left, select Change adapter settings.

If next to the connection “Wireless network connection” is written “Disabled”, then right-click on it, and select Enable.

After these steps, the status of the Internet connection should change. And if there are Wi-Fi networks available for connection within the radius, then they will be displayed in the list, which can be opened by clicking on the icon itself (tray icon). You will be able to select the desired network and connect to it.

If you do not have a “Wireless Network Connection” connection, then most likely you do not have the driver for the Wi-Fi adapter installed. Install the driver according to this instruction, and everything will work.

How to check if the Wi-Fi adapter is working in Device Manager?

You can also go to the device manager and see if there is a wireless network adapter there, and how it works. To open the device manager, do this: go to Start, then Control Panel. Select the Hardware and Sound section. On the Devices and Printers tab, click on Device Manager.

In the manager, open the Network adapters tab. The Wi-Fi adapter has something like this name: “Atheros AR9485WB-EG Wireless Network Adapter”. You can navigate by the word Wireless. You should have something like this:

If you see an arrow-shaped icon next to the driver, then right-click on the adapter itself and select Enable.

If there is no adapter at all in Device Manager (usually there is only one network card driver), then you need to install the driver. Again, you can watch this article.

Here are all the Wi-Fi settings in Windows 7.

After you nevertheless connect to the wireless network, another surprise may await you. the Error “Without access to the Internet” I wrote about solving this problem in a separate, detailed instruction.

Also, another article may be useful to you: where on a computer or laptop (Windows 7, Windows 8) to find the Wi-Fi settings?

Connecting a WI-FI adapter on laptops of other brands

As mentioned above, the inclusion of the WI-FI adapter can be done in different ways, depending on the model and brand of the laptop. In order to find out how this is done on laptops of other brands, you must carefully read the operating instructions for the computer (the user manual is attached to each computer).

As for the connection using key combinations (FN), in most cases this method is used. In addition, this function button can perform other operations. If you do not see such a functional button on your, then most likely that you have a wireless connection to the Internet in some other way described above (you need to click on some special switch or use another button designed specifically for this).

READ  How to turn on Wi-Fi on an HP laptop

I welcome everyone! Today I will tell you how to set up WI-FI on a laptop. Setting up wi-fi on a laptop is not a difficult task. The first thing to know is if your device supports this feature. Modern laptops are already equipped with a wi-fi module, however, some manufacturers still produce devices without wi-fi support, but these are mostly cheap models.

If your laptop is not equipped with a wi-fi module, you need to get a special adapter. To understand if there is wi-fi on a laptop, it is enough to carefully examine the case of the device. Usually, manufacturers glue a sticker under the keyboard or at the bottom of the case, which indicates the presence of wi-fi.

In addition, the wi-fi symbol is also located on the function button of the keyboard, which is responsible for turning on the module. Use the button together with the Fn key.

Put Wi-Fi adapter

If none of the above methods helped turn on your Wi-Fi, then this means that you do not have Wai Fai on your laptop. Either it broke, or you have an old, very old laptop that just physically lacks Wi-Fi.

We plug the Wi-Fi adapter into the USB connector, install the drivers. which the seller gives and it’s ready, we have a brand new Wi-Fi on our laptop. On my Windows 10, the drivers became automatic, so the seller’s drivers were not needed.

Update: trying to enable the wireless network in the mobility center

To open the Mobility Center in Windows 7, you need to press the Win X keyboard shortcut.

There should be a tab called “Wireless”. Most likely, it will be disabled for you. Click on the “Enable Wireless” button.

It happens that the button for turning on the wireless connection in the mobility center is inactive.

From my own experience, I can say that the reason is most often in the software. And most often it is in utilities that are responsible for managing wireless modules on a laptop, or the operation of function keys. Therefore, go to the website of the laptop manufacturer, in the support section, find the download page for your laptop model, and see if there are such utilities there. If so, download and install them. There you can also download the driver for Wi-Fi (Wireless) and start its installation.

Install driver

If the 1st and 2nd methods did not work, then this means that most likely you do not have Wi-Fi drivers installed. This usually happens if that’s just recently. Usually, the kit does not install drivers on Wi-Fi.

Use any method you know for. For example, if the Internet on your laptop works by cable, you can download Driver Pack Online and launch it, update everything that your system lacks, including the Wi-Fi driver, via the Internet.

If you have no Internet at all on your laptop, then you need to look for another computer or phone where the Internet is available and download the necessary drivers manually.

Using Yandex or Google search, you need to find a set of drivers specifically for your laptop. You can also try to rummage on the official website of your laptop manufacturer.

If you find drivers marked Wireless for your model, then know that this is exactly what we need. This is a driver for a Wi-Fi adapter. Download them and install them on your laptop!

How to Boost Wi-Fi Signal on a Laptop

The quality of the connection between the device and the router directly depends on a number of factors. If one or more conditions are not met, it will be unstable, nullifying all the advantages of wireless communication and a high-speed tariff plan. The laptop owner can amplify the Wi-Fi signal in several ways, and then we will analyze the most effective options.

Strengthening the Wi-Fi signal on a laptop

If your laptop, connected to the router over the air, displays poor signal quality, and sometimes even loses connection, you should check the settings of both devices.

Windows settings

The easiest way to verify that the problem lies with the laptop is with the help of other devices connected to the same network. For example, you can take a smartphone and connect it to the router from the same place as the laptop PC. If, at the same distance, the mobile phone will catch better, then the problems lie not in the router, but in the laptop.

Changing the power plan

Quite often the reason for this is a changed power plan. When you set the “Power Saving” mode, the power consumption and the wireless adapter built into the device are reduced. Therefore, if the signal is at least at an average distance, it will become difficult to receive it. You can change the performance of the performance scheme in whole or selectively as follows:

  • Open “Control Panel”.
  • Go to the “System and Security” section, from there to “Power Supply”.

If it is worth viewing with icons, immediately find and go to “Power supply”.

Install the scheme “High performance” or at least “Balanced”.

You can also try changing the power of the Wi-Fi module without changing the power scheme. To do this, click on the link “Power scheme settings” next to the current performance plan.

In the new window, find the item “Wireless network adapter settings”, expand it by clicking on the plus, repeat the same with the item “Power saving mode”. In the column, set the value to “Maximum performance”, save the changes to “OK”.

This advice is more of an addition to the previous one than a stand-alone one. Check for new versions of the driver for the Wi-Fi module installed in your laptop. If any are found, install the latest one. Our other article details how to find and install software for Wi-Fi. Check it out and use the most suitable option.

Configuring the router

Most often, the source of weak signal reception is the router itself, and not the laptop. Even if it is not installed as far away as it appears, the signal strength can still be low, and various factors contribute to this.

Here’s a quick rundown of what can affect a poor wireless connection:

  • Incorrect location of the router;
  • The negative impact of other electrical appliances;
  • Low-performance router;
  • Incorrectly selected antenna angle;
  • Low mains voltage;
  • Unchanged channel and mode of operation;
  • Non-maximum Wi-Fi sharing power mode.

If no advice has been successful, it remains to try to replace the Wi-Fi module installed in the laptop. This method is quite radical, but then the air connection is guaranteed to get better. We recommend contacting the service center for this, and more confident users can make a replacement on their own by purchasing a more powerful module on specialized sites.