How to connect Wi-Fi on a Samsung laptop

connect, wi-fi, samsung, laptop

How to turn on Wi-Fi on a Samsung laptop: from keys to drivers

Samsung laptops are equipped with Wi-Fi adapters for wireless connection to access points. When you turn it on for the first time, after accidentally deactivating the chip or reinstalling Windows, among laptop owners, the question becomes: how to enable Wi-Fi on Samsung devices?

General instructions for laptops are as follows

Installing Drivers

To update, install, or reinstall the wireless adapter drivers:

  • Right click on the icon, select “Status”. “Information”. Pay attention to the line “Description”. It indicates the model of the Wi-Fi adapter.
  • Then press WinR and run the command mmc devmgmt.msc.
  • In the open device manager, find in the “Network adapters” section the line with the name of your Wi-Fi module and go to “Properties” through the context menu.
  • Click update / install driver.
  • Select updates manually.
  • It is recommended to search for firmware and transfer them to your computer from the official Samsung website, specifically for your model. Additionally, they can be found on the disk (if one came with the laptop). Go to Samsung.com and enter your laptop model number.
  • Select the latest available drivers for your installed and supported operating system.

How To Fix a Laptop That Won’t Connect to Wifi!!

  • In the device manager, select the path to the distribution folder. Or run the firmware installation via the exe file.
  • After reboot the device and check the Wi-Fi operation.

For many older Samsung laptops, an adequate transition from Windows 7 and 8 to Windows 10 is not organized. Wi-Fi drivers may not provide full Internet access or there will be frequent failures.

If the problem is observed, you can do this:

  • Through the “Device Manager” search for drivers from the Internet (or rather, on the Microsoft driver base) and, if successful, install a “like-minded” new driver for the adapter.
  • Roll back to Windows 7 and use it.
  • Buy a new external adapter compatible with Windows

What is a Wi-Fi adapter and how to choose it, our Blonde told here.

connect, wi-fi, samsung, laptop

Checking the connection status

Check the status of the network connection:

  • Open the “Run” window with the WinR key combination and enter the command cpl.
  • In the new window, check the status of the wireless connection. If it is disabled, enable it with a double mouse click.
  • If connected, great. Check network performance. If it does not work, activate Wi-Fi with a key combination. In Windows 10, by clicking on the Internet icon (in the tray), Wi-Fi may not be active. Click it to enable network search.
  • If not, there is probably a problem with the drivers and need to be installed / updated.

Shortcut keys

If previously Wi-Fi worked, but is now unavailable, to activate through Windows settings, use one of the key combinations:

  • Fn F12;
  • Fn F2;
  • Fn F5;
  • Fn F9.

These buttons are usually labeled with the Wi-Fi icon. Sometimes there may be an indicator on them that lights up if Wi-Fi is ready to work.

If there is no label and no effect is observed after pressing a couple of seconds later, look for a mechanical button / toggle switch on the edges of the laptop. It can also be used to connect Wi-Fi on a Samsung laptop.

If the buttons do not give the desired result, go back to the program part.

You can enable Wi-Fi on a Samsung laptop hardware (toggle switches, key combination) and software (through the network connection settings). If the adapter is not configured to work, the software is most likely to blame and needs to be installed or updated.

Laptops over 5 years old may experience networking problems on Windows 10 as support for official drivers has long been discontinued. You can get out of this situation by purchasing an external Wi-Fi adapter with a USB connection.

Checking the correct installation of the drivers

If your drivers are installed incorrectly, then even the access point may not respond to a lit indicator and wi-fi will not work. First of all, in this case, you need to check the performance of the network card. Right-click on My Computer and go to Properties.

Next, go to “Hardware”. “Device Manager”. You will notice the entire list of devices that are installed on the laptop. We need to find the section “Network adapters”, and there we are looking for “Wireless”, wi-fi or Wireless. If you see a yellow triangle with an exclamation mark next to the module, then be prepared for what will be needed.

Download drivers from the Internet or use the disk that comes with the laptop. Installation of drivers is standard and not much different from installing any program. Such a scenario is possible that wi-fi will not work immediately, but only after several installations. For the adapter to work well and easily detect wireless networks, you need to set it to automatically obtain an IP address.

How to turn on Wi-Fi in Windows settings

If the specified procedures did not help and you are still wondering How to turn on Wi-Fi on a laptop? you need to check if Wireless Network Connection is enabled in Windows settings. To do this, you need to go to the Network and Sharing Center. One way is to right-click on the network icon in the lower right corner of the screen and select “Network and Sharing Center”.

Then click “Change adapter parameters”.

Another way to use hotkeys is to type the command ncpa.cpl and press Enter.

It doesn’t matter which of the methods you used, the result will be one. the Network Connections window will appear on the monitor. Next, you need to find a wireless connection, right-click on it and select “Enable” (if the Enable option is not available, then the Wi-Fi network is enabled).

Enabling Wi-Fi via Windows Device Manager

If your Wi-Fi adapter is still not enabled, you need to check if it is enabled in the task manager. To do this, click the “Start” button, right-click “Computer” and select “Manage”. In the left menu select Device Manager.

Or press the keyboard shortcut in the search bar type the command mmc devmgmt.msc and press Enter.

The Task Manager window will open, then select “Network adapters”.

If the adapter icon is marked with an arrow down, it means it is disabled, in order to enable it, right-click on it and select “Enable”.

Update: trying to enable the wireless network in the mobility center

To open the Mobility Center in Windows 7, you need to press the Win X keyboard shortcut.

There should be a tab called “Wireless”. Most likely, it will be disabled for you. Click on the “Enable Wireless” button.

It happens that the button for turning on the wireless connection in the mobility center is inactive.

From my own experience, I can say that the reason is most often in the software. And most often it is in utilities that are responsible for managing wireless modules on a laptop, or the operation of function keys. Therefore, go to the website of the laptop manufacturer, in the support section, find the download page for your laptop model, and see if there are such utilities there. If there is, download and install them. There you can also download the driver for Wi-Fi (Wireless) and start its installation.

READ  How to connect channels on LG

Enable “Wireless network”

To get started, open Start, go to Control Panel and find the Network and Internet section.

We have now opened Network Connections. Here you need to find the “Wireless network” connection and turn it on.

If there is no “Wireless Network” or “Wireless Network Connection” connection here, then you shouldn’t be upset, now we’ll come up with something.

Connecting a WI-FI adapter on laptops of other brands

As mentioned above, the inclusion of the WI-FI adapter can be done in different ways, depending on the model and brand of the laptop. In order to find out how this is done on laptops of other brands, you must carefully read the operating instructions for the computer (the user manual is attached to each computer).

As for the connection using key combinations (FN), in most cases this method is used. In addition, this function button can perform other operations. If you do not see such a functional button on your, then most likely that you have a wireless connection to the Internet in some other way described above (you need to click on some special switch or use another button designed specifically for this).

I welcome everyone! Today I will tell you how to set up WI-FI on a laptop. Setting up wi-fi on a laptop is not a difficult task. The first thing to know is if your device supports this feature. Modern laptops are already equipped with a wi-fi module, however, some manufacturers still produce devices without wi-fi support, but these are mostly cheap models.

If your laptop is not equipped with a wi-fi module, you need to get a special adapter. To understand if there is wi-fi on a laptop, it is enough to carefully examine the case of the device. Usually, manufacturers glue a sticker under the keyboard or at the bottom of the case, which indicates the presence of wi-fi.

In addition, the wi-fi symbol is also located on the function button of the keyboard, which is responsible for turning on the module. Use the button together with the Fn key.

Enabling Wi-Fi using a slider / button on the laptop case

On many laptop models, to turn on Wi-Fi, you need to use the slider or a separate button to turn on Wi-Fi. This switch is often located on the front of the laptop.

The switch looks different, but has the same function. turning the wireless network on and off.

To turn on Wi-Fi, simply move the slider to the On position.

Checking the WLAN function

If the adapter works, but the system does not see available networks, the problem may be with the disabled WLAN auto-configuration service, or WlanSvc. Without it, connecting to a wireless access point is impossible, just like distributing the Internet from a laptop to other devices in hotspot mode.

First, let’s check if this service is running. To do this, you need to open the “Services” window. Launch the “Run” window by pressing the combination “WinR”, then enter the command “services.msc”. Click on “OK”.

In the window, we are looking for a service with the name “WLAN Autotune Service”, call its context menu and go to the properties.

In the properties window, the “Status” line will display the current status of the service. If it is disabled, you must configure it to start automatically at every system boot. We select the automatic start type, then click on “OK” to save the parameters.

After the changes, it is recommended to reboot the OS, and then check the performance of the Wi-Fi adapter.

How to turn on Wi-Fi on Samsung laptop. method for all Samsung models

Owners of Samsung laptops often face the problem of how to start the wireless network module, as sometimes it can turn off in order to save energy, and sometimes just due to changes in some system settings or after installing new antivirus programs. Below we will analyze how to enable Wi-Fi on a Samsung laptop, as well as list the most common problems that arise when Wi-Fi works on computers from this manufacturer.

Missing or outdated wireless adapter driver

If you have any problems with the drivers, you need to reinstall them. This is done as follows:

  • We go through the “Control Panel” to “Network and Sharing Center”, then to “Change adapter settings”.
  • A window will open with all network interfaces on this PC. Select our wireless connection, right-click on it.
  • In the context menu, select the line “Status”, then go to the subsection “Information”. This window will display the model of the wireless module.
  • Knowing the adapter model, you can go to the official Samsung website and download the software for a specific model. It must be entered into the search box on Samsung.com. Also, the driver can be on the CD, if one was included with the computer upon purchase.
  • We select the latest version for our version of Windows OS from the list of available software.
  • Now we need to open the “Device Manager”. First, launch the Run window by pressing the WinR combination, then enter the devmgmt.msc command there.
  • In the manager window itself, you need to find the line “Network adapters”, expand it and select the one you need (the name usually contains the word “Wireless”). Right-click on it and go to adapter properties.
  • To update the WI-FI driver, click on the corresponding button in the window that appears. Select “Search for drivers on this computer”.
  • In the next window, specify the path to the file downloaded from the Samsung website.
  • After installation, you need to restart the OS. After starting, we check if the wireless module is working.

On some older laptop models, the drivers will not work correctly on the installed Windows 10. There will be crashes when trying to access the network. There are three ways to fix this problem on older devices:

  • Purchase of an external Wi-Fi adapter. All modern external wireless modules are compatible with Windows 10 and work perfectly with it.
  • Rollback to OS version 7.
  • You can search for a new driver directly in the “Device Manager” by performing an automatic search in Microsoft databases.

An exclamation mark is displayed on the WI-FI icon

An exclamation point indicates that you are connected to a wireless network, but you cannot access the Internet. Often in this case, the problem is not with the laptop itself, but with the router. To check this, try connecting to the router from another device and check if there is Internet on it.

Also, an exclamation mark can appear for the following reasons:

  • Service Provider Issues.
  • Incorrect IP and DNS specified in the connection settings. You need to set up automatic receipt of addresses.
  • Conflict with programs. antivirus and firewalls, less often with other utilities that use the network. It is worth turning off the program and trying to reconnect to the network.
  • Old or incorrect network driver.

Problems and solutions

Using the command “ncpa.cpl”

The wireless network can be enabled and disabled through the window with network connections, or the “Change adapter settings” menu. It opens by entering the command “ncpa.cpl” in the run window (called by the WinR hot key combination).

READ  How to make a presentation on a Samsung phone

The network interface we need is called “Wireless Network Connection” or “Wireless Network”. If the label is gray, it means that the wireless adapter is disabled. You must right-click on it and select the first item. “Enable”.

“Wireless Connection” is displayed, but no networks exist

Sometimes it’s not enough just to activate the adapter to be able to connect to the internet. Even after it has been successfully turned on, it may happen that you will not see any networks at all, including your own.

The first step is to reboot both devices. both your laptop and your router. recommendations on how to fix this problem:

  • check if the WLAN autoconfiguration service is working;
  • update or reinstall network drivers;
  • check the settings of the router itself. it must work in wireless mode so that the signal is distributed to other devices.

A red cross is displayed on the WI-FI icon

A red cross over the network icon in the tray means that the adapter has turned off. You can try to enable it in software or hardware. If the laptop was disassembled, it is possible that the module was not plugged back properly, or it was damaged at all. To check in this case, it is better to contact the master. It is also recommended to check the system for virus activity and update the network adapter drivers.
That’s all for us, we hope that our recommendations helped you connect to WI-FI on your laptop. Do you have any questions? Then ask them in the comments, and we will be happy to answer you any question related to network technologies.

You can enable Wi-Fi on a Samsung laptop hardware (toggle switches, key combination) and software (through the network connection settings). If the adapter is not configured to work, the software is most likely to blame and needs to be installed or updated.

Laptops over 5 years old may experience networking problems on Windows 10 as support for official drivers has long been discontinued. You can get out of this situation by purchasing an external Wi-Fi adapter with a USB connection.

So, wasn’t it that easy? I think you now know how to connect your Samsung Galaxy Note to any PC or laptop using the above methods. If you have any doubts or questions, do not hesitate to ask me. I will answer your questions.

How to connect your Galaxy Tab to a Wi-Fi network

Once you’ve activated the Wi-Fi radio on your Samsung Galaxy Tab (in the Settings app under Wireless & Networking), you can connect to an available wireless network. Pay attention to these steps:

Press the application menu button on the home screen.

When you see a green check mark next to the Wi-Fi option, Wi-Fi is on.

Available Wi-Fi networks are displayed at the bottom of the screen. When there are no wireless networks listed, you are out of luck with wireless access from your current location.

Tap the Password text box to see the onscreen keyboard.

Check the Show password box to see what you enter; some of these network passwords may be .

You should be online immediately. If not, try entering your password again.

When the Galaxy Tab is connected to a wireless network, you see the Wi-Fi status icon shown in the margin, which replaces the cellular signal icon. This means that the Wi-Fi in the tab is turned on, connected and communicating with the Wi-Fi network.

Some wireless networks do not broadcast their names, which improves security but makes connections difficult. In such cases, select Add Wi-Fi Network to manually add a network. You need to enter the network name, or SSID, and choose the type of security. You will also need a password if used. You can obtain this information from the person in charge of the wireless network in your area.

Not every wireless network has a password.

Some public networks are open to everyone, but you have to use the Browser app to find the login page that will allow you to access the network: just go to any page on the Internet and the login page will appear.

How to connect your Laptop to Wifi

The Galaxy Tab automatically remembers every Wi-Fi network it’s ever connected to and automatically reconnects when it detects the same network again.

To disconnect from a Wi-Fi network, simply turn off Wi-Fi.

Unlike a cellular data network, a Wi-Fi broadcast signal only travels a certain distance. Use Wi-Fi if you plan to stay in one place for a while. If you go too far, your Tab will lose signal and disconnect.

About the author of the book

Dan Gookin. bestselling author who wrote the original book “ For Dummies “In 1991. than 11 million copies printed, his books have been translated into 32 languages ​​and explain the hardware,

Connection without Kies

If you don’t want to install Kies so as not to clutter your computer with another mostly useless application, you need to install the Samsung Galaxy Note USB drivers on your computer.
This method was suggested to me by my friend Sam, who works as a market analyst for a well-known farm. Sam hated Kies for having so many puffy dishes and is also known for negatively impacting your PC’s performance and startup times.
So, to get rid of this sin, you need to install Samsung USB Drivers for Mobile Phone from here.
Once downloaded, this 32MB app will make your computer compatible with Galaxy Note. After that, just follow the above steps to connect.

Using Wi-Fi Direct

Wi-Fi. this is the trend of our days. You can transfer files from your device to your PC without the worry of carrying a USB cable everywhere you go. This process is simple too.
1) Select the “Settings” menu in the “Applications” on the phone.
2) Now go to the “Wireless & Networking” option.
3) Open Wi-Fi Direct settings.
4) After that, scan the devices to find another Wi-Fi Direct device you want to connect to.
5) When your target device is found, select “Connect“.
6) Now on the screen of the other device, select “OK” to start the connection.

Malfunction of one of the electronic components

Most modern Samsung notebook models are designed to make it easy to access electronic components such as random access memory (RAM), hard drive, wireless network card (Wi-Fi), and disk drive. To do this, in the lower part of the laptop case, you need to find a compartment (cover) held by screws. For example, this is how the cover that covers the RAM compartment looks like (Samsung laptop model NP540U4E):

As you can see, the cover is held in place by only one screw. By unscrewing the screw and removing the cover, you can get into the compartment for installing the RAM strips:

READ  How to reset laptop to Lenovo factory settings

In this case, the laptop has only one RAM bar. If you have a spare RAM card handy, you can try using it. If the computer turns on, the problem is detected. the RAM is out of order, it should be replaced.

The same can be done with other removable electronic devices. hard disk, Wi-Fi module and optical drive. When removing the hard drive, the laptop should at least boot before the initial boot phase, i.e. the screen turns on and displays a message stating that there is no hard disk. Without a Wi-Fi module and / or an optical drive, the computer will have to boot to the end.

Popular Samsung WI-FI Device Drivers

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Samsung Symbian S60 Phone USB Modem AT

Software inclusion

In some cases, hardware activation does not work, and you need to go into the system settings to enable the wireless module.

The laptop does not turn on, but the lights (LEDs) are on

If the indicators light up when you press the Power button, and the black screen still shows no signs of life, then the power supply is working, and the problem is hidden in the other direction. Try turning off the power for a couple of minutes and then restarting it. Sometimes doing this can help recharge the device. A similar behavior occurs with a faulty RAM. To check why the hitch occurs, you need to turn off the Samsung laptop and try to pull the memory module out of the slot, then insert it back. Has the picture changed? Urgently contact the specialists who will conduct a professional Samsung laptop repair. Self-repair is unacceptable in the case of fragile electronics, since the slightest mistake threatens to be a big waste. Until buying a new device.

How to use WI-FI

Using WI-FI is very easy. After you have created a connection, you can turn it on and off through the network icon in the tray.

However, you need to understand that the ability to use WI-FI strongly depends on external factors. Since the radio signal is affected by the external environment. Obstacles such as walls, ceilings, and floors weaken both the signal of the access point and the signal of the client device. Windows shows the signal strength from the access point in sticks. The pictures at the beginning of the article show the signal level in one or two short sticks. This is a very weak signal. with such a signal, using the Internet most likely will not work.

There are programs that show the signal level in numbers. dBm, for example 60 dBm or 40 dBm. The larger this figure, the weaker the signal. a good signal is a figure less than 50 dBm. However, you need to understand that the accuracy of such numbers varies depending on the adapter and the driver of this adapter. Under the same conditions, one adapter can show for example 71 dBm, and another adapter 82 dBm.

In addition to passive barriers, the quality of WI-FI signal transmission can be adversely affected by sources of electromagnetic radiation. So, even if you have the best WI-FI adapter installed on your laptop, this does not mean that you can always use the Internet via WI-FI.

connect, wi-fi, samsung, laptop

In a bad signal situation, using an adapter with an external antenna can help. For example, the TP-Link TL-WN722N / C USB WI-FI adapter is equipped with an external antenna. over, it is removable and, if necessary, it can be replaced with another one, with a high gain.

What does the presence of an external antenna give? Continuing the same example. under equal conditions. the same access point, the same time and place of connection, the presence of passive barriers between the access point and the client. as a result, a weak signal in both directions:

  • The internal “native” WI-FI adapter of the laptop connects to the access point, but practically does not make it possible to use the Internet due to low speed and frequent breaks.
  • TP-Link TL-WN722NC with its own antenna provides a stable Internet connection at a good speed.

Installing Drivers

To update, install, or reinstall the wireless adapter drivers:

  • Right click on the icon, select “Status”. “Information”. Pay attention to the line “Description”. It indicates the model of the Wi-Fi adapter.
  • Then press WinR and run the command mmc devmgmt.msc.
  • In the open device manager, find in the “Network adapters” section the line with the name of your Wi-Fi module and go to “Properties” through the context menu.
  • Click update / install driver.
  • Select updates manually.
  • It is recommended to search for firmware and transfer them to your computer from the official Samsung website, specifically for your model. Additionally, they can be found on the disk (if one came with the laptop). Go to Samsung.com and enter your laptop model number.
  • Select the latest available drivers for your installed and supported operating system.
  • In the device manager, select the path to the distribution folder. Or run the firmware installation via the exe file.
  • After reboot the device and check the Wi-Fi operation.

For many older Samsung laptops, an adequate transition from Windows 7 and 8 to Windows 10 is not organized. Wi-Fi drivers may not provide full Internet access or there will be frequent failures.

If the problem is observed, you can do this:

  • Through the “Device Manager” search for drivers from the Internet (or rather, on the Microsoft driver base) and, if successful, install a “like-minded” new driver for the adapter.
  • Roll back to Windows 7 and use it.
  • Buy a new external adapter compatible with Windows

Beeps are heard when turning on my Samsung laptop

In the design of all existing motherboards there is a special microchip on which the BIOS or UEFI firmware is written (a more modern analogue of BIOS). When you turn on the computer, the first thing to do is the code of this firmware, the task of which is to initialize all the electronic modules of the computer and turn them on sequentially. If a failure occurs with one of the important components of the PC, the BIOS notifies the user about this by emitting several beeps in a specific sequence.