How to turn on WI-FI on an HP laptop: an overview of the available methods
There are still a small number of people who use wired Internet on a laptop. Most often, users use WI-FI wireless technology. There are adapters for using Wi-Fi in almost any laptop. The HP line is no exception. To take full advantage of the Wi-Fi network, it is recommended that you figure out how to properly enable Wi-Fi on your HP laptop.
On modern PC models, as a rule, the keyboard already has a Wi-Fi enable button. You need to carefully examine the device and find the key with the antenna painted on it.
Just click on it, and the Wi-Fi network will work. Also, in some models, for example, as in the HP Pavilion G6, a light bulb is built into the Wi-Fi key on the keyboard. Accordingly, when the indicator is on. the network is on, off. off.
Windows Control Center
Connecting Wi-Fi on a laptop with Windows 7 or 10 is quite simple. To do this, you need to do the following:
- Go to the “Start” panel and in the search bar find “Control Center”.
- Go to the window for changing parameters, which is located in the left column.
- In the window that appears, find the wireless connection widget. If it is inactive, it will be immediately visible by its gray color. To enable it, click on the icon with the right mouse button and click “Enable” in the drop-down menu.
The wireless network will then become active. This will be shown by the green stripes on the module. The steps are the same for all versions of Windows 7 and above to activate Wi-Fi.
Checking laptop capabilities
Before figuring out how to activate WI-FI on HP, it is recommended to make sure that your computer supports this technology. To do this, you need to do the following:
- Go to the official HP website and find your PC model by serial number.
- In the characteristics you need to find a line with a wireless connection.
- If the device supports this technology, then you can go further. Otherwise, it is pointless to try to include what is missing.
How to turn on Wi-Fi?
For the fastest ways to turn on Wi-Fi on your HP laptop, see the following
There are several ways to enable wireless on an HP laptop. Each user can decide for himself how to activate Wi-Fi.
It is quite simple and easy to enable Wi-Fi on Windows through the bottom panel of the desktop. To activate, you need to do the following:
- Find the Wi-Fi icon in the lower right corner of your desktop and click on it. If the icon is white, not gray, then the wireless network is already active.
- In the window that appears, just click on the button with a similar connection image.
- After that, all that remains is to connect to a free wireless network.
HP laptops have a useful connection manager through which you can activate Wi-Fi. To do this, you must follow the instructions:
- Go to Start Menu.
- Switch to all programs tab.
- Find HP Connector in the list and launch it.
- In the line responsible for the Wi-Fi connection, set the “Enabled” parameter.
After that, it is recommended to exit the manager and connect to a free network. You can also disconnect the connection on an HP laptop in the same way.
Method 2: Using the buttons on an HP laptop
Most often in models of laptops of the HP brand, a combination of buttons on the keyboard is used. For example, you need to hold down “Fn” and click on “F12”. Sometimes, instead of “F12”, another button is provided, but this key always has a picture with a WI-FI symbol.
There are HP laptops equipped with special buttons that perform the function of activating the Wafi adapter. For example, in earlier models such a key was located above the keyboard, and in some subsequent models, the manufacturer began to place it below the keyboard.
Often there are modern models in which a method of activating WI-FI is implemented using a touch button, which is indicated by a characteristic icon of a Wi-Fi wireless network. Sometimes there is an “X” next to the symbol representing the wireless network. If this symbol is active, then Wi-Fi is off.
Wi-Fi activation procedure
Inclusion can be done in several ways.
How to enable WI-FI on an HP laptop
Due to the lack of a single standard for a way to turn on WI-FI on laptops, even in a line of models from the same manufacturer, users often have problems how to turn on WI-FI on a laptop, for example, the popular HP brand. Below is a detailed guide describing how to activate the WI-FI adapter on HP laptops.
Before turning on Wi-Fi on a laptop, you need to make sure that you have correctly installed software for the normal functioning of the WI-FI adapter built into the device. The installation of hardware drivers can be checked using the Network and Sharing Center or through the device manager.
It will take just a few sequential steps:
To solve the problem through the “Device Manager”, you should take the following steps (for example, Windows 10):
- Call the context menu from the taskbar;
- Then click “Parameters”;
- After that, click “Home” and go to the “Devices” section;
- Open the “Device Manager” tab;
- In the next menu that appears, open the “Network adapters” tab;
- The software of the Wi-Fi device will appear here, which always has “Wireless” in its name;
- In the case when icons are displayed next to the device software, for example, “!” or a circle with a mark inside, then the adapter requires reinstalling the drivers;
- In the case when there is no such line with the software at all, then the drivers were simply not installed, but will be displayed as “Unknown device”;
As in the above instructions, you will also need to visit the official resource of the equipment manufacturer on the Internet, download the appropriate drivers for the adapter from there and then install them into the laptop.
Method 1: Using HP Connection Manager
The algorithm of actions consists of the following steps:
- Enter the “Start” menu;
- Then go to the “All programs” section;
- Then open “HP Connection Manager”;
- In the WI-FI column, click on the “Enable / Disable” icon.
Of course, there are much more problems due to which sometimes Wi-Fi is not activated, for example, it is often simply turned off in the BIOS or in services. Also, the possibility of a malfunction of the WI-FI adapter itself cannot be ruled out.
Configuring Ethernet connection in Windows 10
Some PC users do not know how to set up the Internet on a computer using a Windows 10 cable. To do everything right, you need to read the recommendations for setting up a connection.
How to turn on internet in Windows 10. options
Before using the Internet, you need to figure out how you can turn it on manually. There are several common ways to connect to the network using this OS:
- Ethernet cable connection. This is the simplest and most popular method of accessing the Internet. The main thing is that the PC has an appropriate connector for connecting a cable.
- Via Wi-Fi. This method is suitable for users who decide to set up a new wireless connection. Ideal for laptops with built-in Wi-Fi receiver.
- USB 3G / 4G modems. If you do not have cable Internet at home, you can install a modem from MTS, Beeline, Tele2 or other mobile operators.
Additional Information! Several options for connecting to the network can be used if necessary.
Connecting via a cable from a router
Most often, connecting and configuring the Windows 10 Internet is carried out using a router. Using such a router, you can connect devices to the network both wired and wirelessly. This is very convenient for people with a large number of devices that need to be connected to the Internet.
Most models of routers are equipped with a special WAN port, which is designed to connect to a provider network. There are also several LAN connectors. They are used when connecting laptops, computers and other devices.
Additional Information! In rare cases, one of the LAN connectors is used as the WAN port. Information about the ports used in the router can be found in the instructions for the device.
Plugging an Ethernet cable directly into a laptop or PC
Many people are interested in how to connect the Internet to a computer using a Windows 10 cable. In fact, this is quite simple. over, even without using a router. This is a great option if there is only one device at home that needs an internet connection.
To connect a wire for the Internet to your personal computer, you must perform the following manipulations:
- Find a network card connector on a laptop or computer. Most often it is built into the motherboard. On a laptop, it is located on the back or side panel.
- Pull the cord to the computer. If its length is not enough, you will have to install the PC closer to the cable.
- Press the wire firmly into the connector until a characteristic click appears.
If everything is connected correctly, your Windows 10 device will have a high-speed internet connection via a wire.
Connection to PON subscriber terminal
Today, many apartments are connected to the Internet using fiber optic. In such cases, special terminals are installed to which the fiber optic cable is connected. Terminals can be either a separate device or a universal router. It all depends on the preferences of the provider and on what equipment he uses when connecting subscribers.
From the terminal comes an internet cord that can be connected to a router or personal computer. If you have laptops and mobile devices in your home, we recommend that you connect the cable to your router. This will create a wireless network so devices can connect to the internet via Wi-Fi.
Dynamic IP connection
By entering into an agreement with a provider, users can choose a dynamic or static IP address. It is worth noting that setting up the Internet on Windows 10 differs depending on the option you choose.
If you choose a dynamic address, you will have to follow these steps to access the network:
- Right click on the network connection icon.
- Go to “Network Settings”.
- Open Ethernet tab.
- Go to “IP Settings”.
- Select the “Automatic” option opposite the “Purpose” line.
After completing the above steps, the device will be assigned the correct IP address, which will allow you to use the Internet.
Static IP connection
Some providers use a static address. In this case, users will have to independently install it in the operating system parameters. This is done as follows:
- Go to network settings and select the “Status” tab.
- Go to the properties of the network adapter.
- Right click on the line “IPv4”.
- In the line with the address, specify the IP provided by the provider.
- Save the changes by clicking on the “Ok” button.
Additional Information! In the line with the DNS, you can specify the public servers of Google. 220.127.116.11 and 18.104.22.168.
Setting up a high-speed PPPoE connection
In some cases, providers use the modern PPPoE protocol, which is required for network authentication. However, before using it, you will have to tune the OS. To make the connection work, you will have to do the following:
- Go to network settings.
- Go to the “Dialing number” tab.
- Click on the button “Create a new connection”.
- In the window that opens, select “PPPoE Connection”.
- Provide username and password. This information can be obtained from the provider.
- Click on “Connect”.
After that, it will be possible to access the Internet through a PC.
With a cable
To configure any type of connection, you need to go to the control panel, then select the “Network and Internet” menu, and then open the “Change adapter settings” tab. In the dialog box that appears, set the automatic obtaining of the IP-address. If the instruction issued by the provider requires manual input, we do it ourselves.
If your ISP requires a VPN connection, follow these steps:
- Open network settings, select “Create new connection”.
- Select the column “Connection to the workplace” in the menu.
- Specify the type of connection: “VPN”.
- The system’s question about whether it is worth setting up the connection should be answered by clicking “Postpone” with the left mouse button.
- Next, you need to enter the data provided by the provider. It is better to disable encryption settings.
We turn to using the Internet, for this we left-click on the network icon in the lower right corner and select the desired VPN connection.
In cases where the provider provides cable Internet via PPPoE, you should:
- Start by creating a new connection by clicking on the “Internet Connection” column.
- Click on the “High Speed, DSL or Cable” tab.
- In the window that opens, enter data from the provider’s documentation. Do not forget to click the checkbox on the “Remember data”.
A modem is required to connect via ADSL. Communication with the World Wide Web will be carried out through a telephone cable. The disadvantages of this method are in a rather low speed due to an outdated connection system.
The main telephone line is included in the splitter that divides the connection into telephone and Internet. Next, using a cable, you need to connect to the modem via the LAN connector. And from him already connect to the laptop via the WAN connector. This connection is suitable for remote villages where there is poor wireless connection and there is no fiber optic cable.
Connection via Wi-Fi is possible only if there is a module in your laptop or using a special USB Wi-Fi adapter. A Wi-Fi router differs from a modem in the ability to connect several gadgets to the network at once. It has the ability to set a password to protect against unauthorized use of your traffic. When buying a Wi-Fi router, the instructions for it contain a factory password with a login, which, if desired, can be changed in the device settings.
To access the Wi-Fi router, you must select it in the list of wireless networks and enter the correct password for authorization.
For the router to work correctly, two important conditions must be met:
- Choose the place where the router will stand.
- Provide it with uninterrupted power for correct operation without interruptions.
There are two types of routers to work on a wireless Wi-Fi network:
- wired routers;
- wireless routers.
The first type of devices works on the principle of a modem and directly receives the Internet through a cable, after which it distributes it via a Wi-Fi connection over a limited distance. The speed on such a connection is slightly lower than with a cable connection, but it is quite stable.
Wireless Wi-Fi routers operate on SIM cards and provide a much slower connection speed, in addition, mobile communication reduces the stability of Internet access. The advantage is the ability to work on a laptop anywhere, thanks to the wireless connection.
How to set up the Internet on a laptop
Operating a PC or laptop is impossible to imagine without access to the Internet. There are several ways to get constant access to the Network and at the same time ensure a high speed of receiving and transmitting data. each user can choose the one that suits him. There are two main types of access to the World Wide Web: wired and wireless.
How to set up a wired internet connection on a laptop
Access through a wired connection has established itself among users as the most stable.
This type of Internet connection will be most relevant for those who are used to downloading large files via the network or working remotely. The wired method ensures the stable operation of the Internet, which allows you to access the necessary resources 24 hours a day.
Let’s analyze in detail all the subtleties of providing wired access. There are 2 types of it:
- Using an optical cable.
- Network access via ADSL technology.
Setting up each connection method has different nuances.
Wireless internet connection on laptop
For stable and high-speed Internet operation, two well-known wireless connection methods are also suitable:
Via mobile internet
For a mobile connection of a laptop to the Network, modems with a built-in SIM card or a phone connected via USB to the laptop are used.
The modem can be purchased in the communication salon of the corresponding operator. choose the most preferable one for you. Find out if the ISP you want fully provides for your area. After the purchase, it remains only to make the first launch and install the software.
Setting up a mobile modem is very simple:
- Insert the modem into the USB port on the laptop.
- Wait for the installation of drivers and programs for your modem.
- After installation, a launch dialog box will open.
- Enter the authorization data that was given to you in the communication salon, and then check the box: “Remember” so as not to enter them again every time.
After that, wait for the network connection.
In order to access the Internet via a smartphone, you must:
- Connect smartphone to laptop using USB cable.
- In the phone settings, find the tab responsible for mobile connections.
- Select USB modem mode.
- Wait for synchronization and start using the Internet successfully.
Such a connection is notable for its low speed, but does not require additional costs for purchasing a device to access the Internet. The user only has to control his traffic, since most operators provide a small amount of it for mobile.
In general, connecting a laptop to the Internet is quite an easy task, even for a novice user. It can be solved without contacting a service center or involving a specialist.
What you need to consider if you have the Internet
Here it is necessary to take into account the fact that if you have access to the worldwide network, an anti-virus program must be installed. it must be activated, that is, so that it is fully functional and automatically updates its anti-virus databases via the internet.
It is important to keep in mind that, despite the fact that the antivirus is installed but not activated, that is, the key is missing or it is blocked, it is not working. it does not protect the computer in any way.
If viruses get on your computer, then most likely you will need to reinstall Windows, and this is already a significant financial cost. Not to mention the fact that it is possible as a result of a virus attack without protection to lose important data (but it can be recovered in most cases), which, if it can be returned, then for a very considerable amount of money.
375 (29) 113-44-91 (led)
Attention, do not forget about the main reason for laptop breakdown
asking why the laptop started to turn off by itself. If he does not bother you now, this does not mean that you will never run into him. The laptop itself turns off for a very important reason, which, if not fixed, then you cannot do without a breakdown. Therefore, we advise you to figure out in advance why the laptop turns off.
375 (29) 731-01-20 (mts)
This article will help you understand the question of how to connect and configure the Internet on a laptop or personal computer (PC). The laptop is a very convenient tool for both work and play. Therefore, you simply cannot do without the Internet on it or a PC.
Let’s take a look at two ways to connect to byfly internet:
The wired method of connecting to the World Wide Web usually boils down to the following actions:
You need to choose a provider to get access to the network. A provider is simply a company or organization that provides you with internet via a telephone cable or local network.
You need to find a provider in your city, familiarize yourself with its tariffs for access to the worldwide network and choose the one that suits you. Then contact the employees of this organization and conclude an agreement with them to provide access to the network.
Introduction to connecting and configuring the internet byfly
Running on battery power (calibrating the battery for its longevity), beech can be with us everywhere, sometimes helping to pass the time profitably. Since now the Internet (hereinafter. the worldwide network, internet or simply the network) is almost everywhere, the laptop, as a working tool, must necessarily give access to the worldwide network.
How to access the internet from a laptop, questions often arise.
How to connect a laptop to the Internet
The laptop has long ceased to be a luxury. it is a tool for work, leisure and entertainment. Many have already appreciated and fell in love with this wonderful device, for some it has become a full replacement for a desktop PC.
If you connect your laptop to the internet. he will be able to reveal his potential even more. And it pleases. Today we will consider several options “how to connect a laptop to the Internet.” Are you ready? Let’s start.
Option 1. How to connect a laptop to the Internet using Wi-Fi.
This is one of the easiest ways to connect. Most modern laptops are equipped with a Wi-Fi module. If you are within range of a Wi-Fi network. connection can be done in the following way:
- Turn on the Wi-Fi module on the laptop;
- Go to Start / Connect, find and click Wireless Network Connection;
- Select the network to which we want to connect;
- Double click on the selected network. and we are connected. If the network is secure. you will need to enter a password (check with the administrator / network owner);
- When you establish a connection, you get full access to the Internet.
If the Wi-Fi module is missing. it is possible to purchase and install a USB Wi-Fi adapter. This miniature module can be a full-fledged replacement for missing / non-working hardware on a laptop.
Option 2. How to connect a laptop to the Internet using a USB modem.
Nowadays USB modems are used by the “popular love”, with the help of which one can access the Internet. This access option is interesting if there is good coverage and adequate in the tariff plan. If you wish, you can find providers that provide mobile Internet complete with a 3G modem. The connection procedure may vary depending on the equipment and service provider.
In some cases, providers set up a connection for free in their service center, sometimes you can find special programs that automatically install hardware drivers, create a connection and configure Internet access parameters. An option is not excluded in which you will have to connect and configure the USB modem yourself. How it usually happens:
- Insert the SIM card into the USB modem;
- Insert the USB modem into the USB port on the laptop;
- The system will detect a new device (during the installation process, you need to select a language);
- We agree with the License Agreement and the place of installation of the program;
- After the installation is complete, click “Finish”;
- The program will start automatically. If not. start in manual mode and enter the pin code (written on the card for the SIM card);
- The program is ready to go. Click “Connect with. “. After creating a connection, we can use the Internet.
The connection diagram may vary depending on the equipment used and the provider (service provider).
Option 3. How to connect a laptop to the Internet via a cable, using a network card.
Let’s imagine that the masters who are engaged in connecting subscribers have already come to you. They ran the cable, checked for a connection, and plugged the cable into the connector on the network card. It remains only to configure the network card:
- Go to the Start menu, then select Control Panel;
- Find and click Network Connections, there you need to select Local Area Connection and double-click on it with the left mouse button;
- Then select and click Properties, in the list we need TCP / IP Protocol, then click Properties again;
- Finally we got to our destination. If the provider provides automatic settings. select “Obtain automatically” for the IP and for the DNS server. Clicking the OK button will complete the settings of the network card. All settings are complete. Welcome to the internet world.
- If the provider does NOT provide automatic settings. select “Use the following IP” and manually “drive in” IP, Mask and Default gateway.
- Next step. you need to register the main and alternative addresses for the DNS server;
- After clicking OK, the settings are fixed. Internet connection will be established automatically when the laptop is turned on.
The description of the settings may differ depending on the service provider.
For the data required for the settings of the network card, check with the provider (service provider).
Ignore the seeming complexity of the connection settings. After you make the settings at least once. everything will fall into place. After a few trial connections, you can easily set up Internet access not only for yourself, but also for all your “technically hopeless” acquaintances. Congratulations: now you know as many as three answers to the tricky question “how to connect a laptop to the Internet”.
How to increase the speed of Wi-Fi on a laptop: Wi-FiGid recommendations
Hello dear reader! After reading fortunes on the coffee grounds, I realized that you came to our portal to find out the answer to the question. how to speed up Wi-Fi on a laptop. I must say right away that this cannot be done purely physically, since the modules on the laptop and router work at maximum speed initially. But the problem of low speed is a little different.
If there are too many people sitting on one router and everyone is actively using the Internet, then the speed will drop dramatically. For example, if you start a movie download on one device, then the Internet will fall for everyone, since in this case the channel will be clogged only by this device. About public WI-FI networks. I think you guessed it. Usually a large number of people sit there and speed. most often it is cut based on the number of Wi-Fi clients.
When using radio space, there is a small disadvantage in that neighboring routers use it. At the moment, the most common frequency is 2.4 GHz. This frequency has only 13 channels, while only 11 are most often used. The problem is that with a large number of routers that are located with each other, they can be on the same channel. This can cause interference, packet loss, and speed drop dramatically.
Therefore, I recommend this article about Honor. It tells how to find a free channel and change it on the router. After doing this, the connection problem should be resolved.
Installing a more powerful router
Conventional cheap routers operate at 2.4 GHz with the 802.11n standard. When using one stream, the speed higher than 150 Mbit per second will not be. On the more expensive ones, we install the so-called MIMO system. This thing allows you to transfer data at a higher speed at the same time to one device.
But here you need to take into account that the download will be higher. only within the network. If you have an Internet connection of up to 100 Mbps, then it makes no sense for you to buy powerful and expensive routers. On the other hand, if you increase the channel to 300 Mbps, you need to take the more expensive model.
In this case, it would be better to use the 5 GHz frequency. This standard has a speed higher than 1 Gbit per second, and it is also rarely used at home. therefore, the chances of catching interference from a neighbor are less. But it must be borne in mind that the range will be worse in this case, since higher frequencies fade out faster. An overview of more powerful routers can be found here. With the help of such devices, you can really increase and increase the speed of receiving and transmitting packets over WI-FI.
Internet speed is lower than stated
If your Internet speed is, for example, 200 Mbps, but when measuring, you do not see a figure greater than 100, then most likely you just have a limited port. The Internet cable from the provider is connected directly to the WAN port. Cheap routers often have 4-core ports with a limited speed of 100 Mbps. It is the port that will cut the speed. In this case, only buying another model with 1 Gbit ports will help.
NOTE! You can just walk up and see if you see 4 cores. then the limit is 100 Mbps, if 8. then the maximum speed is 1 Gbps.
Real speed increase
How to increase the speed of Wi-Fi on a laptop? As you already understood, when connecting, the frequencies 2.4 and 5 GHz are used. The first one is used most often and has 11 working channels. In this case, when transmitting radio space. information uses 1 channel at 20 MHz. At a frequency of 2.4 GHz, you can increase the width to 40 MHz, then the speed should theoretically increase, but only in a clean radio space.
If you have many neighbors, as the channel width increases, your router will catch interference not from 2 channels, but from 4 channels. and the connection may become worse. Such an experiment should be done only in a private house in the complete absence of neighboring Internet centers. Just go to the router settings and set 40 MHz in the “Wi-Fi” section.
NOTE! For the rest, it is better to set the channel width to “Auto” or “20/40 MHz”. In this case, the router will automatically expand and narrow the channel itself as needed.
Speed up internet with DNS
DNS servers are constantly used to connect to Web pages. Therefore, DNS addresses can be interrupted on any device and set faster.
- Write the command as in the screenshot above;
- Next, you should see a list of connections. You need to choose the wireless one. Right-click on it and go to properties. Now we select the 4th protocol, we also acquire properties and set the checkbox as above. In the example above, the DNS from Google is installed: 22.214.171.124 and 126.96.36.199.
You can also try Yandex DNS:
After that, click “OK”. The page loading speed should be slightly faster than before. Also, some services will work faster. The internet is full of free and fast DNS so you can try others as well. DNS addresses can be entered manually on any device, but it is best to do this on a router so that all connected devices use these addresses.
Change of provider / tariff plan
This advice does not apply to optimization and tuning, but nevertheless.
Of course, one of the most effective ways to increase the speed of the Internet is to change the tariff plan of your connection (or even change the provider itself).
over, now in most cities, Internet connection is free, several providers are available and there is always a choice (perhaps only those who live in small regional centers where there are practically no alternatives are held hostage).
Note: by the way, if you decide to change the provider, I recommend asking around the neighbors at the entrance. this way you can assess the real speed and quality of Internet services (and choose the best option for your particular house).
Are there any other applications that overload the network?
Also, quite often, many users do not even know what applications they have using their Internet channel. It is possible that the Internet speed is low in your current program due to the fact that the entire channel is busy with some other process that you do not even know about.!
For complete control over the network, I recommend using the special utility NetLimiter (in principle, it has many analogues, you can use something else).
Simple and reliable internet control application. Allows you to see all programs using the Internet channel. Having defined all that is superfluous. you can block or disable these apps. Thus, the Internet channel will be freed up for your current tasks.
NetLimiter. traffic control application
You can also partially estimate the network load in the task manager (this is especially clearly seen in Windows 10, in Windows 7. open the resource monitor). An example is shown in the screenshot below.
Task manager in Windows 10. network load is minimal
App for downloads is not configured (e.g. uTorrent)
Not so long ago I helped an acquaintance who complained that he had too long downloading files. Imagine my surprise when in uTorrent (and he downloaded them through this program) I found the set speed limit! Because of such trifles and carelessness, sometimes you have to wait for hours for the download.
The premise here is simple: be sure to check the settings of the application in which you download the file (and in which you are unhappy with the Internet speed). It is possible that there is a restriction in the settings!
If you touch uTorrent (as one of the most popular download programs), then open the program settings and check the “Speed” tab. It sets the speed limit for downloading and uploading. Set your values based on the tasks and power of the PC.
Also check the “Traffic Limit” tab. if you do not have an unlimited Internet connection, then it can be very useful.
(If you have enabled and set a certain traffic limit, then upon reaching it, uTorrent will stop transferring files)
By the way, if the question is about uTorrent, then I recommend that you also read another article:
Why uTorrent downloads at a low speed: torrents take a very long time to download. https://ocomp.info/utorrent-kachaet-s-mal-skorostyu.html
Strengthen the signal, set up the router (for those who have a Wi-Fi network)
If you have a router at home, a Wi-Fi network is configured and you access the Internet using it. that is, there are a number of important things that you need to pay attention to: the location of the router and laptop (phone), channel settings, whether network protection is configured, etc.
I talked about all these subtleties in one of my articles (link below).
Ways to Strengthen Wi-Fi Signal. Improve Reception and Increase Network Radius at Home: https://ocomp.info/kak-usilit-signal-wi-fi.html
As a result, after completing these activities, the speed in your Wi-Fi network will increase, which means that the Internet will work faster.
Configuring Internet Channel Reservation
Windows by default can limit your Internet bandwidth up to 20%! Naturally, this can seriously affect the download speed, and therefore it would be nice to disable this reservation. How to do it?
You must open the Group Policy Editor. To open it, press the WINR button combination. enter the command gpedit.msc in the open line and press Enter. The method is relevant for Windows XP / 7/8/10.
gpedit.msc. launch the group policy editor
Note! If you have a home (or initial) version of Windows. most likely, you will not open the Group Policy Editor, giving an error: “Cannot find gpedit.msc. Please check if the name is correct and try again”.
Next, you need to go to the branch: “Computer configuration. Administrative templates. Network. QoS package scheduler”. After, on the right, open the “Limit the reserved bandwidth” parameter (see the screen below ).
Local Group Policy Editor / Windows 7
In the window that opens, set the slider to the “Enable” mode and set the limit to 0% (as in the screenshot below). After that, save the settings and restart the computer. The restriction should now be lifted.
Limit the reserved bandwidth to 0
Update the drivers for the network adapter
In general, drivers are a tricky thing, sometimes you have to spend a lot of time until you set everything up properly.
When it comes to the network adapter, there may be a couple of options:
- you do not have a driver for a network card. as a rule, in this case you will not have the Internet (at all!). Here, I think, it is clear what to do. download and update the driver;
- Windows automatically picked up and installed the driver: in this case, the network will work (and in most cases you don’t even need to do anything else). But it also happens that the adapter with these drivers does not work as fast as it could with the “native” optimized drivers. Therefore, it is highly advisable (when you are not happy with the speed of the Internet) to download and update the driver from the official website of the device. For example, I have come across several times that after updating the driver, the network speed increased 3-4 times!
1) How to install, update or uninstall the Wi-Fi driver (wireless network adapter). https://ocomp.info/kak-ustanovit-drayver-na-adapter-wi-fi.html
How to speed up the Internet on a computer, laptop
Tell me, is it possible to somehow speed up the Internet on a laptop? I am connected via a Wi-Fi connection, the provider promised a speed of 50 Mbps. but in fact, everything loads very slowly.
I contacted the Internet provider. they checked the network and said that everything was fine on their side, look for the problem yourself. I myself did not find it, but in order to call specialists from the provider, you need to pay them (and, I would even say, not sour.).
You wrote “slowly”. and this concept is very loose ;. For some, download a movie in 10 minutes it is slow, you need for 2 ☝. But in general, in general, the problem is quite popular, and in this article I will describe the main methods and points that you need to check, and which, in the end, will speed up your connection somewhat.
How to turn on Bluetooth on a laptop and set it up
Every modern laptop, netbook or ultrabook is equipped with a radio module with WI-FI and Bluetooth. This trend is followed by almost all laptop manufacturers. HP, Asus, Acer, Toshiba, Samsung, Lenovo, etc. And the most interesting thing is that fewer questions arise with the wireless network. it is, as a rule, initially turned on, the user connects to the home network and then works quietly. But questions about Bluetooth arise. And no wonder. there is no separate button. This misleads a novice user, and he quite logically has a question. how to turn on Bluetooth on your laptop ?! And the casket just opened. But first things first.
I will take an HP (Hewlett Packard) Pavilion laptop as an example.
Since the WI-FI and Bluetooth radio module on the laptop is one single, it turns on with the same button with the antenna image. On older models, a separate button on the body of the device was used for this. On modern ones, as a rule, the Wi-Fi and Bluetooth power button is combined with one of the function keys. In my case, this is F12. That is, to turn on Bluetooth on your laptop, you need to activate the radio module by pressing the button with the antenna:
However, keep in mind that very often this button must be pressed together with the “Fn” function key.
Very often this button is equipped with an additional, separate status indicator. If WI-FI and Bluetooth are off, it is red. After pressing the button, the adapter will turn on and the color will change to blue or white. After pressing the button, the following icon will appear in the Windows system tray:
This means that everything is included and you can connect phones and tablets. To do this, click on the icon with the right mouse button and select the “Add device” item:
The laptop’s operating system will start scanning and searching for available devices to connect. It goes without saying that they must be visible via Bluetooth. If everything is fine, then you will see your phone or tablet:
And all that remains is to connect to it and you can transfer files, music and video.
What to do if Bluetooth doesn’t work?!
The most common reason is that the Bluetooth adapter is simply not turned on. over, as a rule, the user simply forgets to press the power button of the wireless module.
It also happens that the button itself worked, but the adapter did not turn on, so try again to turn it off and on.
Note: Separately, I note that very often after reinstalling Windows 7 or Windows 8, users simply forget to put the driver on the functional buttons of their laptop and they, accordingly, do not work.
The second point. pay attention to the Bluetooth icon in the system tray next to the clock. If it is red like in the screenshot:
This means that the adapter was disabled programmatically. In this case, you need to right-click on the icon and select one single item in the menu that opens. Enable.
If these actions do not help, then the problem is already at the driver and hardware level.
Then, first of all, we go to the Network and Sharing Center and in the menu select the item “Change adapter settings”.
A window for network connections will open. there should be 3 connections. a wired network card, a WI-FI connection and a Bluetooth adapter:
Make sure they are active, i.e. the connection icon must not be gray.
If suddenly there is no Bluetooth adapter in the laptop’s network connections, then you need to look for it in the Device Manager. You can get into it in several ways. The fastest is to press the WinR key combination and write the devmgmt.msc command in the window that opens:
The second option. you can right-click on the Computer icon in the Start menu and select the “Management” item. The “Computer Management” snap-in will open, in which you need to select “Device Manager”:
We are interested in the “Network adapters” section. If all drivers are installed, then this list should also have at least 3 items. wired network, wireless and Bluetooth. As you can see, in my example, two devices are referred to as “bluestooth”. the Bluetooth Device and the Bluetooth Personal Area Network. There are no crosses and exclamation marks indicating problems with the equipment. this is already a good sign. It remains only to check whether the Bluetooth network is running. To do this, right-click on devices on the Bluetooth Personal Area Network:
If the context menu has an item “Engage”. feel free to click on it. This is most likely the cause of the malfunction.