How to connect redmi AirDots headphones to iPhone

Doesn’t connect

The device may appear in the list of connections, but not connect. An error may appear on the display or the connection may take too long. more than 1-2 minutes. Then it is necessary:

  • Remove all devices from the “My devices” list that are no longer in use. click on the exclamation mark on the right and tap on “Forget this device”
  • Restart wireless headphones and turn off / turn on Bluetooth on smartphone.

connect, redmi, airdots, headphones

Pairing occurs, but no sound or poor sound

In this case, we are talking about a poor-quality headset or a sudden interruption of the signal.

How to pair Redmi Airdots with Iphone XR

If the problem is a bad signal, follow the instructions:

  • Restart headphones.
  • Disconnect the headset for about 30 seconds and only then reconnect.
  • Shorten the distance between the smartphone and the wireless headset. Long distance may interfere with the connection.
  • Disable extraneous Bluetooth devices.

Headset runs out of battery quickly

Li-ion battery has a limited shelf life, usually 300-400 charge-discharge cycles or 3-4 years of active use. Over time, the autonomy of Airpods is greatly reduced. For old technology, there is only one way out, contacting the service to replace the built-in battery.

If the user has Airpods, then you can try to increase the battery life. Those. enable the auto-detect ear function. With the help of an infrared sensor, the headphones will understand when the user takes them out of their ears, they will automatically turn off. This will help conserve battery power. To activate the function, you need:

  • Open “Settings”.
  • Select “Bluetooth”.
  • Then “Airpods”.
  • Turn on the toggle switch “Auto-detect ear”.

If the headset is not native, then it can be returned under warranty or taken to a service center to replace the battery.

Before connecting accessories, with the section “Questions and Answers”.

NFC. it is a wireless technology that helps to exchange data between different devices.

The algorithm for connecting headphones with an NFC chip to an iPhone is quite simple and includes several steps. This feature is present on all iPhone models older than 5.

  • If the option is not activated, you need to go to the settings and, opposite NFC, move the slider to the right.
  • Then you need to touch the back of the phone to the NFC icon on the wireless headset.
  • Allow the connection. There will be a connection between the devices.

This function works on gadgets with iOs above 13.1. As for the headset, not only Airpods are supported, but also some models.

The first option for simultaneous connection using the “Share audio” option.

Instructions on how to output sound to the second set in a case:

  • Connect one Airpods to iPhone. The second should be in the case.
  • When listening to music on Airpods, you need to bring the phone to an open case with another set.
  • A menu will open where you need to select “Temporarily share audio”. Confirm action.

Connecting second headphones without case:

  • Connect some “plugs” to the iPhone and put them on.
  • Open AirPlay from the lock screen and share audio.
  • Bring your phone to another device and click “Share Audio”.
  • Confirm connection on the second gadget.

The second way to bind with manual configuration.

  • Connect one headset to iOs.
  • Launch settings and then go to Bluetooth.
  • Open the case with the second set and hold the connect button until the indicator starts flashing.
  • Wait for the headset to appear in the “Other devices” section.

Bluetooth has a maximum transmission range of about twenty meters. But do not exclude the influence of interference from other objects, which can reduce the range of Bluetooth operation.

If the headphones are working properly, but there is a problem with the volume control. In Airpods, all default settings, including changing the volume, were transferred to the voice assistant Siri. To control the sound level, just tell Siri to turn down or turn up the volume.

You can just say, “Siri, volume at maximum.” You can also adjust the sound as a percentage. You need to name a specific number and the command will be executed. It is important to remember that the system will pause the music before turning up the volume.

Reference! Sound control available through Apple Watch.

Possible difficulties

Even though the wireless device is comfortable to use, connection problems may occur. It is important to note that there are almost no difficulties with the original Airpods headset, but it will be useful to know the solution to standard problems.

One Airpod is quieter than the other

  • One of the headphones is discharged. Need to put the headset in the charging case.
  • Check that the holes are clean and not stained, and there is no debris on the screens. If there is contamination, then it is necessary to carefully clean the device with a brush.
  • Be sure to check volume settings on iPhone.

Reference! If the sound quality remains poor, you hear clicks, whistles, creaks, we recommend that you take the headset to a service center for repair.

Only one earphone works

If the user encounters this problem, you need to try to fix it in different ways.

  • First option. Put the earplug in the case and wait at least 10-15 seconds. Reconnect to smartphone.
  • Second option. You need to turn off Bluetooth on the iPhone and start it again. If the action does not help, you can restart the headset.
  • The third option. It happens that one of the headphones does not see the phone. You need to select “Forget device” in the settings, and then connect both as a new pair.
  • Fourth way. In the main menu of the iPhone, in the equalizer, set the slider to the center position. It happens that the indicator moves to the extreme left or right position.

3 ways to connect any wireless earbuds to iPhone

Airpods and lesser-known plugs are only gaining popularity with the development of streaming and music services. But sometimes, users are faced with the problem of how to properly synchronize devices. Therefore, let’s take a closer look at how to connect wireless earbuds to iPhone. In parallel, we will consider the main problems.

The manual is universal and suitable for all iPhone models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max.

How to connect both Xiaomi earbuds?

Each Xiaomi AirDots earbud is equipped with a dedicated touchpad located on the outside of each device. This allows you to quickly connect the headset to the phone. The process of connecting the device to Android and iPhone is the same.

Consecutive steps on how to connect wireless headphones to a smartphone:

  • Take both devices and hold down the panels at the same time until a purple-red flicker appears. This process will reset the previous settings.
  • Place the earbuds back in the charging case. There the headset should sync. The right earphone is activated first, since it is considered the main one. Its readiness for use is indicated by a pale purple blinking.
  • Then go to Bluetooth settings on your phone. There you need to select the headset you need to connect, which is usually designated “Mi AirDots BASIC_R” (you can change this name yourself). Next, the smartphone needs to be connected to the right earpiece, and it is already connected to the left device.

You can increase the operating time of the Xiaomi headset by connecting only one earphone. The procedure is fast and does not require any special skills. To do this, in the Bluetooth settings, you need to select the left or right device, which is designated “Mi AirDots BASIC_L” or “Mi AirDots BASIC_R”, respectively.

At first, the indicator will search for a pair, which is indicated by the corresponding flashing of the indicator. But after 15 seconds, the flickering will slow down and one earbud will start functioning on its own. Next, the device will connect to the phone.

Xiaomi AirDots how to connect both earbuds to the phone?

The stylish Xiaomi Air dots wireless headphones are compact, lightweight and functional. The unique device can work without interruption for up to 4-5 hours. The main thing is to know how to properly connect both Xiaomi headphones.

How to pair Xiaomi AirDots headphones?

In some cases, it is not possible to connect two Xiaomi headphones at once. Usually this situation occurs when the left device loses the right one, which is the master in this pair.

How to connect a wireless headset to each other:

  • Disconnect two devices. To do this, you will have to simultaneously clamp the touch panels on the devices. The shutdown is indicated by a red color on the indicators.
  • Turn on your headphones. To do this, hold down the touchpad again for half a minute. First, the indicator will light up white, and after 10-20 seconds a red-white light will appear, which will flash a couple of times.
  • Reset the settings. You will have to hold the touchpad again. The system should go out for a few seconds, then blink a couple of times, after which you will have to set up the headphones again.
  • Charge your headset. In the charging case, the devices will start syncing. After that, take out the headphones and connect to the phone.

Xiaomi wireless headphones have some operating features that will have to be taken into account when connecting and setting up devices. When the headset is discharged, the indicator is red. Full charge is indicated by white light.

The touchpads will help you turn on, turn off, set up the headset, but you cannot use them to adjust the volume. To find out the percentage level of charge, you will have to go to the Bluetooth settings.

Switching devices off and on is accompanied by comments in Chinese. This is a normal process, so there is no need to worry about possible breakdowns. Headphones do not turn off automatically when removed from your ears.

The average operating time of the headset is 2-5 hours. Much depends on the air temperature (the colder, the faster the devices lose their charge). To fully charge, you need to put the devices in the charging case for 40-50 minutes.

To pause the music, you need to “hit” the body once. Double tap will help you connect with the voice assistant. If you need to take a call, press it twice. A single tap will help you drop an incoming call.

How to pair Redmi Airdots with Iphone 7 or Iphone 7 plus

How to connect Redmi AirDots wireless headphones to a smartphone

Wireless headphones are becoming an essential part of everyday life. The absence of wires provides maximum ease of movement. Xiaomi has already released several models of wireless headphones. And now we will tell you how to connect the Redmi AirDots model, which is also known as Mi True Wireless Earbuds Basic, to a smartphone.

Before using the device, you must remove the protective film from the contact surfaces of the headphones, place them in the case and charge them. The indicator glows red while charging. When fully charged, its color turns white, and after 1 minute it goes out.

To connect, you need a smartphone with Bluetooth support and Redmi AirDots. The headphones are turned on and off automatically when they are removed or inserted into the case.

To connect, remove both earbuds from the charging case at the same time and wait 2 seconds until they turn on. After switching on, the left earbud automatically connects to the right one, the indicator of which starts flashing white.

Moving on to the smartphone. Turn on Bluetooth and search for available devices.

The device we need is called Mi True Wireless EBs Basic_R. This is the right earpiece. Click on this name and accept the pairing request, in which you can allow the exchange of contacts.

After a successful connection, information about the status of the device and its charge level will appear in the menu of paired devices. Headphones are connected, turn on the music and enjoy.

After the first successful pairing, Redmi AirDots will automatically connect to the previously paired device if it has Bluetooth enabled.

If for some reason you are unable to pair with the headphones, remove the headphones from the charging case and make sure they are turned off. Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone, if present. Then pair again.

READ  How to Connect a Phone Screen to a Laptop

It is also possible to use the headphones alone as a Bluetooth headset. The pairing algorithm is exactly the same. To connect only one earphone, you need to take it out of the charging case and wait for it to turn on automatically. The headphone indicator will start flashing white quickly and then slowly. Searching for available devices. Depending on the headphone you choose, the device will be called Mi True Wireless EBs Basic_L or Mi True Wireless EBs Basic_R. It remains to click on the name of the device and accept the pairing request.

Enjoy music wirelessly with Xistore!

Author: Andrey Kalina

How Xiaomi Wireless Headphones Work

If you take the earpiece out of your ear, the music doesn’t stop like it does on Airpods. The devices are disconnected only in the case, and are connected back to the phone when they are taken out:

  • put only the left one in the case, it will turn off, and the right one will work;
  • remove the right one. both will turn off.

Headphones work with voice assistants Siri, Google Assistant, Alice. The controls are intuitive:

  • 1 touch. pause or answer a call;
  • double. call the voice assistant. The only thing that is inconvenient: when you want to fix the earpiece and inadvertently press the touch panel, the music will stop;
  • holding one or more seconds. call cancellation;
  • double tap during a call. mute the microphone.

How to use Xiaomi AirDots wireless headphones

4 hours. And if you listen to the tracks alone, then the device’s performance will increase by 1 hour. The Bluetooth headset is connected in the same way. both to the iPhone and to Android.

  • Hold the touchpad of one earbud.
  • The phone settings will display “Mi AirDots BASIC_R” or “Mi AirDots BASIC_L”. whichever you choose. For example, the left one. While it blinks often, it means looking for the right one. After 15 seconds after activation, it will blink less often. from this moment, the earphone is activated as an independent device. It’s ready to pair with your phone.

And yes! The sound of the AirDots babies is what you need. With bass too. But only if you choose the right ear pads that come with the kit. They should fit snugly into the ear canal. A sure sign of “your” size. when “ears” are not felt when worn.

How to connect Bluetooth headphones to your phone

The Xiaomi AirDots feature is the touch panels on the outside of each earphone. They can be used to connect Xiaomi wireless headphones to the phone.

  • Press and hold both earbuds until you see a double purple-red blinking. This is a signal that you have reset the settings.
  • Put them in the charging box for a while, take them out and wait for the devices to “find” each other. As soon as this happens, you will see a pale purple blinking of the right earbud. He is in charge.
  • Go to the Bluetooth settings of your smartphone. Available devices will display the designation “Mi AirDots BASIC_R”. These are your headphones. The phone will connect to the right one, and that will connect to the left.

Sometimes AirDots sync separately. The reason. the left “ear” “loses” the right.

4 things to do if one wireless earbud does not work.

  • Unplug the two earbuds: hold down both touchpads until the red lights turn on.
  • Hold for 30-50 seconds: first, the white indicator will turn on, then, after 10-20 seconds, it will light up in red-white. The indicator will blink 2 times.
  • Continue to hold until they flicker a couple of times and go out for a few seconds. Then they flicker a couple more times. this means that the settings have been reset.
  • Now put the “ears” in the case and take out both of them shortly. The left one will look for the right one, synchronizes with it, and you can connect to the phone.

How to charge wireless headphones

Xiaomi AirDots charges the case, and it itself is powered by micro USB. Not 1.5 hours. as the manufacturer says.

45 minutes. The case is equipped with a 350 mAh battery, it is enough for three recharges.

  • If the diode does not flicker and glows red, the battery is charging.
  • White color indicates 100% battery charge.

Watch the video review of Mi AirDots, their problems and solutions

Leave your opinion and wishes to the article “How to connect Xiaomi AirDots wireless headphones”

How to connect Redmi AirDots headphones to a smartphone?

Redmi AirDots wireless earbuds model, also known as Mi True Wireless Earbuds Basic. Consider connecting two headphones to a smartphone at the same time, as well as the option of connecting one as a mono headset.

Before using the device, you must remove the protective film from the contact surfaces of the headphones, place them in the case and charge them. The indicator glows red while charging. When fully charged, its color turns white, and after 1 minute it goes out.

To connect, you need a smartphone with Bluetooth enabled and Redmi AirDots headphones. The headphones are turned on automatically when they are removed from the case. Connecting two headphones to a smartphone:

  • remove both earbuds from the charging case and wait 2 seconds until they turn on.
  • after switching on, the left earphone automatically connects to the right one, the indicator of which starts blinking white.

Go to the smartphone: in the Bluetooth menu, search for available devices.

In the list of available devices, we find Redmi AirDots_L. This is the left earpiece. Click on this name and accept the pairing request, in which you can allow the exchange of contacts. Depending on the version of the headphones: Redmi AirDots or Mi True Wireless Earbuds Basic, the name in the list of available devices may differ. If you have a version of Mi True Wireless Earbuds Basic headphones, then in the list they will be referred to as Mi True Wireless EBs Basic_L. The only difference between the versions is that one was produced for the domestic market of China, and the second for the Global market. This does not affect the functionality and operation in any way. Options and specifications are identical. But the price may differ.

After a successful connection, information about the status of the device and its charge level will appear in the menu of paired devices. The headphones are plugged in and ready to go. Now, after the first successful pairing, Redmi AirDots will automatically connect to the previously paired device if Bluetooth is enabled on it.

If for some reason you are unable to pair with the headphones, remove the headphones from the charging case and make sure they are turned off. Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone, if present. Then pair again.

What to do when headphones don’t pair with each other?

The connection between the headphones can be established by resetting the Bluetooth modules.

  • disconnect both headphones. press and hold the buttons until the red indicators turn on;
  • now hold down the buttons again for 30-50 seconds, wait until the headphones turn on. a white indicator should appear, then after another 10-20 seconds the indicators will light up and flash twice in white and red (do not release the press) and then flash twice more and go out;
  • put both earbuds in the case;
  • now remove them from the case, wait until the synchronization procedure is complete and reconnect the headphones to the smartphone.

If, after the reset, the smartphone begins to see the left and right headphones separately, you need to connect only the right one to the phone, and when it starts playing sound, you need to press the power button on the left. it should connect to the right.

If it doesn’t work the first time, try resetting again. Also, as a last resort, it will not hurt to clear the data of the “Bluetooth” application on your device.

Enjoy music wirelessly with Midusa!

Second way

Xiaomi did not limit themselves to one connection method, so they came up with another algorithm. It comes in handy if the first instruction doesn’t help.

  • Open the lid of the case and remove the headphones from it.
  • Clamp the touchpads on both earbuds. They will start flashing red and white.
  • As soon as two colors blink, return the headphones to the case.
  • Take the headphones out of the case. Flashes should occur, the frequency of which will decrease at the right earphone.
  • Now connect your headphones to your smartphone via Bluetooth.

If failed to connect Bluetooth headphones, please follow the instructions below.

How to connect headphones to a smartphone

Before you connect Redmi Air Dots to your phone, set them to charge. Put the headphones in the supplied case and connect it to the mains. If the indicator is red, then the accessory is charging. As soon as the LED on the case turns white, the device is ready for use. After that, remove the headphones from the case and wait for them to sync. This will be indicated by a blinking white indicator.

How to use Redmi AirDots

There are no buttons on the headphones, so all control is carried out using gestures on the touch panel:

  • if you press the panel once while listening to music, playback will stop;
  • if there is an incoming call, then in order to reset it, you need to tap on the case once;
  • accordingly, to receive a call, you need to double-click on the panel;
  • when you double-click (if there is no call or music playback), Google Assistant or Siri is activated, depending on the smartphone;
  • If you take one earbud out of your ear while talking or listening to music, the sound will continue to flow through the second headset. Play will stop as soon as both earbuds are in the case.

The first way

  • remove the headphones from the case;
  • go to the settings of your Xiaomi smartphone and activate Bluetooth (you can turn it on in the control panel by swiping the screen);
  • on the page with connections, select “Refresh” so that the device finds headphones for connection;
  • after the update, the display will show Mi True Wireless. click on it and confirm the connection;
  • now in the menu you will see the status of the headphones, as well as the battery level. They themselves will be displayed in the list of connected devices.

Note! You don’t need to press anything on the headphones themselves. The device is activated and deactivated by opening and closing the case.

How to connect Redmi AirDots headphones to your phone

Xiaomi Redmi AirDots are headphones from a Chinese manufacturer. This model belongs to the class of TWS headsets (completely wireless). Such devices have appeared relatively recently, so it is not surprising that many users are not familiar with the procedure for connecting them to a smartphone. In this article, we will answer this and other important questions from users.

What you need to know about connection

Let’s pay attention to a few nuances that will be useful to new users of Redmi Airdots:

  • the red color of the LED indicates a low battery charge, white. the full charge of the headphones and their readiness for work;
  • the volume of the sound during a call or playing music is regulated on the phone itself;
  • the instructions for connecting to iOS, Android and computer are the same;
  • it takes 45 minutes to fully charge the battery, and the autonomy of the gadget is 3-4 hours of continuous listening;
  • if you are going to use only one earbud, remove it from the case and leave the other inside the case. After that, wait until the fast flashes give way to slow ones, and connect the device to the smartphone in the usual way.

What to do if headphones won’t connect

If you cannot connect Bluetooth headphones to your smartphone, try this instruction:

  • remove both earbuds from the case. They must be included;
  • on both earbuds, hold down the touch pad for 15–20 seconds;
  • as soon as the device flashes 3 times, put it in the case and let it charge;
  • now go to the page with Bluetooth connections on your smartphone and clear the list with saved devices.
READ  Lost iPhone photos how to recover

After that, repeat the connection procedure. The problem should go away.

As it turned out, there is nothing difficult in connecting Xiaomi Airdots. If the headset does not connect for the first time, you need to reset its settings. Read how to do this above. The instructions from the article are relevant for all models of the manufacturer’s headphones, including AirDots 2 and Pro.

How to connect Xiaomi Redmi AirDots headphones to your phone or how to sync correctly?

It would seem, what can be difficult in connecting headphones to a smartphone? However, practice shows that some models of headphones are not as simple as it might seem at first glance. In this article, we look at the connection of the very popular headphones from Xiaomi. AirDots.

They are delivered in a beautiful box, which is simultaneously used to charge them:

What exactly is the problem? There may be several of them. So, individual users cannot connect headphones to a smartphone, others connect only one earphone, third ones do not detect AirDots at all. How to be?

It is important to follow simple but necessary guidelines. So, if you see connection problems, first of all do a reset on AirDots, for which first unpair with headphones in your smartphone:

Next, do a reset, for which press the buttons on both headphones and hold for about one minute.

Then put the headphones in the box for at least 30 seconds so that the headphones can detect each other. Important! Make sure they are at least 50% charged and there is no significant difference in battery charge between the earbuds, otherwise it may not work.

While you wait 30 seconds or longer, pick up your smartphone and turn on Bluetooth, for which go to “Settings”.

You see the available device, which normally has the name Redmi AirDots_R, click on the name (R. right, right earpiece, it is responsible for pairing both earbuds. If you see the letter L (left) in the name, only the left earphone will connect). If you do not see, click on the “Update” button.

Next, check how the headphones work. both should be playing! Open any player and check, for example:

If this method does not work for you, try doing the same thing again.

For the subsequent connection of AirDots to a smartphone, it should be enough to turn on the headphones themselves and Bluetooth on the phone. the device is paired automatically.

How to connect Xiaomi Redmi AirDots headphones. second way:

  • Take them out of the case.
  • Hold the touchpads on both earbuds.
  • There should be a couple of flashes of red and white light. hold the touch buttons.
  • There will be another blinking of both colors.
  • Place the accessory back into the case.
  • Take it out and wait a little. the fast flashes become slow at the right earbud.
  • Then just plug the earphones into your phone.

Charging

The gadget will not be able to work if it is not charged, so place it in a case to fill the battery before using it. If the indicator is red, Redmi AirDots are charging, if white. they are ready for use.

Take the headset out of the case and wait a couple of seconds. the earbuds should sync with each other. When the left catches the signal from the right, sync is complete, as indicated by an indicator that will flash white.

How to connect Xiaomi Redmi AirDots headphones

To connect headphones, you only need a Bluetooth-enabled phone and the accessory itself.

Please note that turning on and off the gadget occurs as a result of removing or putting the headphones back into the case, respectively. So do not try to find any buttons with which you can activate them.

How to connect Xiaomi Redmi AirDots headphones to the phone: instruction

Wireless headphones have been the flagship accessory of the past few years. and more people are replacing “wires” with a more comfortable headset. Therefore, now many brands focus their production on such gadgets. The Chinese brand Xiaomi also does not stand aside. in the spring of 2019, the manufacturer released the new Xiaomi Redmi AirDots, also known as Mi True Wireless Earbuds Basic. According to buyers, they provide good performance and great sound. How to deal with connecting them to a smartphone. we will discuss in this article.

How to connect both earbuds:

  • Turn on Bluetooth.
  • At the bottom of the page, click on the “Update” button to search for new devices.
  • In the list, select the name of the accessory “Mi True Wireless EBs Basic_R (Right. right earphone)”.
  • Click on the name and confirm the connection request.
  • In the menu, you will see information about the status of the headphones and the battery level.

Done! You can now listen to music.

The manufacturer decided not to limit itself to one connection method and, just in case, provided a second method.

What you need to know about connection

Let’s pay attention to some nuances that are useful to know and take into account when it becomes necessary to connect Redmi AirDots.

Connection and control features:

  • Remember the colors of the indicator: red means there is no battery charge at the moment, white means ready for use, full charge.
  • The sound volume is controlled only by the rocker on the smartphone itself.
  • The connection methods are the same on Android and IOS.
  • Recharging the battery takes about 45 minutes.
  • Battery life: about 3-4 hours.
  • To use only the right or only the left earbud, remove one device from the case, and leave the second there, wait until the frequent flashes change to slow ones and connect in the usual way.
  • The headset is connected to the computer in the same way.

What to do if headphones won’t connect

Many people ask this question when the gadget cannot sync with the phone, or the name of the wireless headphones has disappeared from the list of paired devices.

Instructions for returning the accessory to work are as follows:

  • Take the AirDots out of the case, they must be turned off.
  • Pinch the touchpad on each earbud for up to 15 seconds.
  • After blinking three times, put the earbuds back in the case and let them charge.
  • Go to the “Bluetooth” page on your phone and remove the name of the gadget from the list.
  • Finally, go through the entire connection process from the beginning.

Connecting Redmi AirDots to the phone

Modern headphones are very simple and comfortable to use, because no wires are required for listening. But with the introduction of the Bluetooth module, the connection to the phone has become more complicated. Owners of Redmi AirDots are often faced with the fact that the synchronization fails.

Today we will tell you how to properly connect two earbuds to mobile devices on Android and iOS and computers, and also consider methods to help with desynchronization.

What to do if headphones are connected separately

Out of sync is a very common occurrence that causes a lot of inconvenience to use. But there are two proven methods that will return binaural mode. The first option is a standard reset to factory settings, carried out by a long press (for 40-50 seconds) on the control button. A similar procedure will also help:

  • We extract the Dots and forcibly deactivate them.
  • Clamp the panels until the red indicators light up and a beep sounds. Letting go of the buttons as soon as the lights go out.
  • We put Mi or Redmi AirDots in the docking station and take it out again. The headphones should be connected to each other while still in the case, after which they will work in stereo mode without any problems.

Connecting to iPhone

Headphones from Xiaomi work well with the iPhone, but subject to the Bluetooth specification 4.2 and higher (version 4.0 may slow down the sound). If you have a relatively new model from Apple, pairing will happen instantly, and the melody will be broadcast in high quality without hesitation.

  • Enable AirDots in the same way as in the first paragraph.
  • Activate wireless technology on iPhone and find the necessary gadget in the list.
  • Enter confirmation code.

Connecting to an Android phone

The procedure may seem multi-stage and time-consuming, but this is only at the first connection. Then you only need to activate Bluetooth, and AirDots will connect automatically.

Before connecting Redmi Dots to another phone, be sure to remove it from your current smartphone. It is advisable to clear the application cache and reset the gadget to the factory state.

How to connect one ear pad

Users do not always want to use two inserts. For a conversation, only one is quite suitable, which acts as a compact headset. In addition, the battery life will increase by an hour.

But keep in mind that for such purposes you need to use the right ear cushion, which is the main one; the left one can be put back in the case. If you put the right one in the case, Xiaomi AirDots will automatically turn off. Just hold down one control button until the white flashlight appears and sync in the smartphone settings.

Is it possible to connect to the computer

Any wireless earbuds connect not only to a smartphone, but also to a PC. The main condition is the Bluetooth module. All laptops have it, but most desktop computers don’t. Purchase a special adapter that plugs into the USB connector and transmits a signal.

  • Go to the computer in “Settings” and open the section “Bluetooth, printers, mouse”.
  • Select “Add Devices”. The model you want will be there (provided that it is enabled).

This article has detailed instructions on how to sync wireless headphones with computers and laptops.

We discussed how to connect Xiaomi (AirDots Youth Edition) and Redmi to any device. As you can see, it’s pretty simple and fast. When problems arise, a hard reset almost always helps.

Connecting Xiaomi Wireless Headphones to iPhone

The Chinese brand Xiaomi has become well known all over the world for its quality and affordable smartphones. In addition to this, no less high-quality accessories are now produced under this brand. smart watches, fitness bracelets, wired and wireless headphones.

Wireless earplugs from “Xiaomi” are very popular. They are stylish, fairly simple and reliable devices to use. Any of the models, be it Redmi AirDots, AirDots Pro, AirDots Pro 2, etc., can be a worthy replacement for more expensive headphones of this type. For example, the functionality of the Xiaomi Pro is comparable to that of the Apple Airpods.

The Pros boast attractive design, great sound, long battery life and Active Noise Cancellation (ANC). The value of ANC lies in the fact that the surrounding noise becomes inaudible, and the user can fully immerse themselves in the world of music or focus their attention on telephone conversations. Another huge advantage of the inexpensive AirDots Pro headphones over Airpods is the IPX4 waterproof rating and advanced touch controls. Taking into account the affordable price and impressive technical characteristics, many owners of iPhones instead of Airpods choose Airdots for themselves.

In order for the connection of a Xiaomi headset to an iPhone to be successful, you need to know that it supports a Bluetooth version of at least 4.2. That is, the pairing will be possible with the models of iPhones and iPads that were released in 2014-2015. At least iPhone 6, iPhone 6 Plus and up, and iPad Pro, iPad Air 2, iPad mini 4 and newer tablets will work. If you have an iPhone 5s, then “ears” from “Xiaomi” do not fit it.

Pairing Xiaomi AirDots with an Apple Phone or Tablet

Charge the batteries of these devices before pairing TWS headphones and Apple smartphone. Working Bluetooth modules, especially in search and pairing mode, require extra power. It is enough to put “dots” in a case for this, and put the iPhone on a wired or wireless charger. You do not need to strive for the battery indicator to show 100%, half of the maximum level is enough for connection. Pairing AirDots with an Apple phone is almost as easy as connecting Airpods to an iPhone, although the process has its own quirks. To make everything work out the first time, follow the step-by-step steps that are described in the instructions.

READ  How to transfer data to iPhone

Take the earbuds out of the charging case. They will turn on automatically.

Before pairing with iPhone, AirDots must first establish a connection with each other. Therefore, turn off the headphones by pressing the touch or physical button (depending on the model) on each of the “dots”. When turning off, do not release the buttons for 3 seconds.

Turn AirDots back on. Press and hold the buttons at the same time for about 30 seconds. The LED indicators should flash first red, then white. Wait for two series of such signals to pass. This will mean that both earbuds are in pairing mode. You need to put them back in the charging case for about 5 seconds, then take them out to connect them directly to the iPhone.

At this stage, you need a phone. Since AirDots are already prepared for pairing, open Settings, then Bluetooth on your iPhone and activate the wireless module. The smartphone starts searching for devices. Compatibility is the most decisive factor for successful detection, but we have already indicated above which models of Apple smartphones Xiaomi headphones work with. The line “Mi AirDots BASIC_R” or “Mi AirDots BASIC_L” will appear in the list of detected devices. Select her.

Perhaps such an entry will not be found in the list. Then the headphones need to be placed closer to the phone and the list of devices should be updated. In a pair of AirDots, the right earbud is the main one, so the new item in the list will be “Mi AirDots BASIC_R” (in fact, the device name may be different, not the same as in this example, it all depends on the headphone model). Click on it to start the connection. The indicator on the earbud will flash white while pairing is being established. Sometimes you need to enter a code to confirm the connection. Enter 0000.

When the process is complete, the indicator will turn white again and turn off. You can now use your headphones. Check the quality and, if necessary, adjust the sound settings.

After you manually connect the dots to your smartphone for the first time, they will automatically connect to it every time you take them out of the case. If you have problems with pairing, you will need to remove Mi AirDots BASIC_R from the list: click on the name, and then select “Forget this device” and repeat the steps described in the instructions.

By the way, “Airdots” are connected not only in stereo, but also in mono mode, when only one earphone from a pair will be paired with the phone. This method of connection can be convenient in cases where complete isolation from ambient noise is not required. For example, on a busy street for greater safety, it is better to hear what is happening around. Another way of using AirDots significantly increases the battery life of the headphones: while one of them is in operation, the second is charged in the case, then the plugs are swapped. To pair only one of the two headphones, take out only the left Airdots from the charging case. Let the right one remain in the case.

Situations when the pairing between the headphones and the iPhone, as well as between the right and left “dots”, disappears from time to time. Then you have to do a reset and pair it again, in the order recommended in the detailed instructions given above.

In general, the compact budget earplugs “Xiaomi” or “Redmi” are a good choice for those who want to take advantage of modern wireless technology in their daily life, but do not yet decide to buy Apple Airpods of the first or second generation or more expensive Airpods Pro.

Does Xiaomi AirDots Fit Apple iPhone?

The Chinese manufacturer of Bluetooth headphones has guaranteed not only support for Android, but also for iOS. Does this mean that Air Dots can be connected to any Apple-branded phone or tablet??

Compatibility with iOS devices depends on the Bluetooth version used in phones and tablets. It is known that headphones from Xiaomi began to be released with support for the wireless protocol version not lower than 4.2, and the AirDots 2019 models already have support for Bluetooth 5.0 and Apple’s native AAC codec.

Take the time and check which version of the Bluetooth module your iPhone is equipped with. Owners of the iPhone 6 and 6 Plus, as well as the iPad Air 2 should be especially careful. Initially, these models were released in Bluetooth version 4.0, and support for 4.2 appeared in them later, along with the iOS 9. On other, new models of iPhones, compatibility problems there should be no Bluetooth versions. The fifth version of BT appeared in Apple devices starting with the iPhone 8.

By the way, you will not be able to find out which version of the “blue tooth” on your iPhone through the “Settings” program. In early iOS firmware, this information could be found by opening “Settings” “General” “About this device”. item “Bluetooth”. Now, in this line, an alphanumeric code, which is obscure for a layman, consisting of 6 pairs of values, separated from each other by a colon. For this reason, it is best to check the specifications of your model, which are listed, for example, on the official Apple website, or use other reliable sources.

Let’s take a closer look at how to connect Redmi AirDots to iPhone.

Connecting AirDots Headphones to iPhone

The Xiaomi brand is known for its high-quality and inexpensive (compared to competitors) smartphones sold not only in China, but also in many countries around the world. Not only mobile phones, but also accessories of this manufacturer are deservedly popular among fans of high-tech gadgets. Many people enjoy wearing Xiaomi smartwatches and fitness bracelets. In this regard, it is also impossible not to mention the Xiaomi AirDots wireless headphones.

Affordable price, attractive appearance and good quality make Air Dots Bluetooth headphones a “tasty morsel” for many smartphone owners. Among them are not only fans of the Xiaomi brand, but also those who are loyal to Apple products. Finally, there are decent models from Xiaomi that can be used with an iPhone or iPad instead of expensive Airpods.

Pairing Xiaomi AirDots with iPhone

Turn on Bluetooth on iPhone (“Settings” “Bluetooth”, slide the switch to the “On” position). Wait for the smartphone to finish searching for compatible Bluetooth devices.

Take the Xiaomi AirDots out of the charging case. If the headphones are in the case, they will not be able to connect to another device by default. Outside the case, they will turn on immediately and the status LED will blink white. Thus, the right and left headphones are synchronized, they are ready to work in pairs.

A new name will appear in the Bluetooth search menu, associated with Xiaomi Redmi AirDots, or it will be Xiaomi Mi AirDots (or AirDots Pro. depending on which headphone model you have).

Radar for detecting nearby wireless devices from iPhone works continuously. You may have to wait a bit until the headphones show up in the list. Otherwise, just turn Bluetooth off and on on your iPhone so it finds your Air dots.

Click on “Redmi AirDots_R” and the pairing of the headset and the iPhone will continue to be performed automatically, you only need to give permission for this connection. When the process is over, the indicator on the headphones will blink white and turn off.

Typically, wireless earbuds connect to iPhone without any problem. If you successfully completed this task for the first time, then the next times, as soon as you take the headphones out of the charging case, pairing with the iPhone will be done automatically. At the same time, you need to remember that first you need to get the right (main) earphone out of the case, otherwise, if you take out the left one first, the mono mode is activated for AirDots. This means that only the left “gag” will work, while on the right, synchronization will be lost.

Redmi AirDots controls

In the Redmi AirDots model, instead of touch controls, a physical button is installed on each of the headphones. Pressing a button is accompanied by a clicking sound, which can be annoying if you are immersed in the process of listening to music or watching videos.

Single press the button will pause the playback of a media file or allow you to answer an incoming call, because Air Dots is also a full-fledged headset. However, how smoothly it will work with the iPhone in the case of receiving calls, you need to check. On the forums, many owners of these headphones are not too happy with them when using them as a headset.

Double tap will call the voice assistant Siri (or Google Assistant if the headphones are used with an Android phone).

If you hold down the button for one or more seconds, then you can cancel the call.

Double press the button turns off the microphone when making a call.

Not all users like this primitive control and won’t be able to switch tracks with it. For many, this causes some discomfort, at least at first.

Sound quality

The inconvenience of using the button is compensated by the decent sound quality that these headphones give out. Of course, you shouldn’t expect exceptional sound from these inexpensive “ears”, but for the price it is one of the best specimens on the market. In general, there may be a little lack of bass, but the highs sound crisp and clear. The mids are good too, even when the playback volume is set to maximum. In any case, you can adjust the sound frequencies using the equalizer, which you need to download and install on the iPhone.

These headphones are very loud. If you set the volume level above 70%, then you will not get any pleasure from listening to music. There is another small drawback: if you watch videos (especially videos on YouTube), you can notice a slight lag between the sound and the image.

Regarding Redmi AirDots, we can say the following: they are beautiful and functional, despite their low price. Sound quality is good enough for an inexperienced listener. Music connoisseurs who prefer to deal with audio in uncompressed formats will surely find their drawbacks. Easy connection to an iPhone and the ability to use AirDots for 4 hours on a single battery charge means you can take these wireless headphones with you to work, on a walk, to the gym or on a trip.