How to connect channels on LG

The first way

There are several methods on how to set up your LG TV. There are two main ways. To perform quick setup on your LG TV, follow these steps:

  • Open the official website of a TV company that acts as a provider.
  • Find a subsection on the site that is needed to tune channels on LG TV.
  • Go to the “Main menu”, click on the “Channels” section.

connect, channels

  • Select cable TV mode. It is worth pointing out that modern models do not always have such a mode.
  • Open the section “Manual tuning” or “Auto search” on TV “LG”.
  • In the window that opens, enter the parameters specified on the portal of the television company.
  • Launch “Search” by first connecting the antenna or cable from the provider.

After this step, the digital TV connection is complete. You can watch free TV programs without a set-top box, which are available in your area.

If the automatic search did not find all the channels, then most likely the weak TV signal is to blame. You can check it by pressing “Info” on the remote control. A window will appear where the signal quality will be indicated. If it is less than 50%, then manual tuning or signal amplifier should be used.

How to tune channels on LG TV with antenna and cable connection

After the law on the transition to digital television was approved, many companies began to sell the digital TV connection service. But if you follow certain rules of the instructions, you can set up TV yourself, without the help of intermediaries. Below is the answer to the question. how to tune digital channels on your LG TV.

Second way

You can connect your cable TV to receive a signal in a different way by performing the following manual steps:

  • Click on the “Home” remote control and go to “Settings”. if you intend to set the necessary parameters for “TV LG Smart TV” from the antenna. As for older models, then you need to go to the “Menu”.
  • Open the tab with options, and select the one you need in the list of countries. When the TV is released in 2010, you can choose Russia. In the case of newer models, Germany can be supplied.
  • Select Russian in the appropriate section with a list of available languages ​​(if not selected).
  • Go to “Settings” and click on “Autosearch” TV channels on the TV screen.
  • Select “Cable”. If not, then you need to change the country. Then change the language again. If the operation fails, then the TV does not have a tuner.

If the procedure ended successfully, then you managed to get one step closer to installing 20 free channels on digital TV and remove analog channels. On older models, there are a few more steps to follow:

  • Set “Autosearch” by entering modulation. 256, speed. 6750, initial frequency. 274 thousand, and final frequency. 770 thousand.
  • Next, click on the checkboxes for obtaining sections with additional information.
  • Start search. Wait 20 minutes for the channels to appear on the screen in the standard order. If after this time an error occurs, the procedure must be repeated.

Finally, it is worth pointing out that almost all LG TV models have an automatic system update function. If you do not want to constantly reconfigure the television signal after automatic reset, you should disable this function. To do this, in the settings mode, go to the section with the cable settings and turn off the automatic update. All actions performed must be saved.

Manual way

To install manually, you need to follow the following sequence of actions:

  • We find out the parameters for setting on the website of the operator of television services.
  • Go to the “Menu” section.
  • Select the “Channels” tab.
  • We turn on “Cable TV” (newer TV models may not have this function).
  • We pass on the button “Manual setting”. You will need to enter operator parameters in the appropriate fields.
  • The search process starts, at the end of which the user receives a free digital TV.

How to tune your LG TV to satellite TV

Correct configuration of TV channels is an important stage in connecting equipment. Below we will look at how to tune channels on a good quality LG TV in a few minutes. There are several ways to install channels on the modules of this company, which differ from the type of TV and the TV signal format (analog, digital or satellite) selected by the user. The article contains step-by-step instructions for installing each of them.

Step. configuring language options

Allows you to set the menu display language as well as the track for digital TV. Provided that the channel is broadcast in several languages ​​at once. Also, the user will be able to customize the main and auxiliary language support.

It is imperative to configure the language for voice search and keyboard. Absolutely all of the options listed above can be edited in one menu. How to enter it? Follow this step by step algorithm:

  • Take your remote control.
  • Click on the “Home” button. the icon with the image of the house.
  • Go to the “Settings” section. the gear icon.
  • Click on “”. the ellipsis icon.
  • Select the “General” tab.
  • Go to the subsection “Language”.

It is clear that if the default language is Russian, then this step can be skipped.

Manual way

To install manually, you need to follow the following sequence of actions:

  • We find out the parameters for setting on the website of the operator of television services.
  • Go to the “Menu” section.
  • Select the “Channels” tab.
  • Turn on “Cable TV” (newer TV models may not have this function).
  • We pass on the button “Manual setting”. You will need to enter operator parameters in the appropriate fields.
  • The search process starts, at the end of which the user receives a free digital TV.

Automatic tuning

To tune your LG TV to receive digital TV, you just need to have a connection to the most common antenna. You will also need a T2 receiver, but modern models of equipment from this manufacturer are equipped with a built-in module. This means that you don’t have to buy an additional set-top box.

Autosearch allows you to find both analogue and digital channels. The main advantage is speed. You do not have to enter additional values, adjust the frequency, etc. Just open the main menu, select “Automatic channel tuning” and wait for the TV-device to do everything for you.

In general, the whole process takes no more than 5 minutes. Of course, you first need to choose source of connection. a cable or an antenna. Now you know how to tune channels on your LG TV automatically.

Automatic search

To install free satellite TV on an LG set-top box, you will need:

  • Connect the tuner to the screen via HDMI. If the receiver is built-in, the cord is connected to the corresponding connector on the panel.
  • Go to the “Menu”.
  • We go to the “Channels” and select the type of signal. “Satellite”.
  • Click “Satellite Settings”, check the parameters and click “OK”.
  • Go to “Autosearch” and run it.
  • We get installed satellite TV.

Note! To watch paid channels, you will need to insert a CI or CI card into the TV adapter

The listed methods help 90% of users to independently cope with setting up LG set-top boxes. If the installation failed, then you need to check the correct connection of all elements.

Correct configuration of TV channels is an important stage in connecting equipment. Below we will look at how to tune channels on a good quality LG TV in a few minutes. There are several ways to install channels on the modules of this company, which differ from the type of TV and the format of the TV signal (analog, digital or satellite) selected by the user. The article contains step-by-step instructions for installing each of them.

How to connect an antenna to your LG TV

The first question that arises when buying a new LG TV is how to connect the antenna and tune the TV channels? It is quite simple to do this on your own, without resorting to the services of specialists.

READ  How to connect the Internet via WI-FI on a laptop

On the back of your TV there is a dedicated cable inlet for the antenna. Depending on the model, it may be marked with the abbreviation ANT IN. But even if there are no designations, it is impossible to confuse it with other inputs (for example, HDMI or USB), since it has a recognizable appearance, the same for TVs of all brands and models: it is a threaded cylinder with a hole in the center. The exception is very old TVs with cathode ray tubes (kinescopes), in which the coaxial connector looks like a flat cylinder with a smaller cylinder in the center.

Connecting the antenna to the TV Lg: step-by-step instruction

  • Make sure your LG TV is unplugged. This is necessary in order to avoid accidental damage to the TV or antenna during connection.
  • Locate the rear panel for the cable entry and connect the antenna. On some models it may be necessary to screw on the cable. To do this, rotate clockwise until the cable is securely fixed.
  • Turn on the TV to the network, after which you need to tune the channels.

After the antenna is connected to your LG TV, tune the channels.

If this is the first time you turn on your new LG TV, you will need to set your language and location before tune in channels. These are important steps that you better not skip or postpone. over, it only takes a few minutes.

In order to set the language on your LG TV, you need to:

  • Using the remote control, press the “Settings” button.
  • Select the section “General”.
  • Use the joystick on the remote control to select the language you want.
  • Save changes made.

In order to set the location on your LG TV, you need to:

  • Using the remote control, press the “Settings” button.
  • Select the menu item “Options”.
  • In the “Country” section, select your country of location.
  • Save changes made.

How to tune channels on your TV Lg: step by step instructions

The easiest and most convenient way to tune channels on your LG TV is to use the Auto Tuning feature available on all models. With its help, you can configure not only digital channels, but also analog.

If your LG TV supports the DVB-T2 standard, the European standard for terrestrial digital television of the second generation, then the satellite dish can be safely connected to the LNB connector without a receiver. In order for the TV to receive a signal, in the settings you only need to specify the correct signal source “Antenna” or “Satellite TV” (depending on the TV model). The vast majority of current LG TVs support this format. You can find more accurate information about your TV model in the “User’s Guide” or on LG official website. by entering the model number (a combination of numbers and letters) located on the back of the device.

You can also find the model and serial number on the TV itself. Using the remote control, press “Settings” / Smart (depending on the model), select the “Help” section, and in it. the item “Product Information”.

If your TV model does not support the digital standard, then in order to watch digital channels, you will need to additionally purchase a DVB-T2 set-top box and connect it to your LG TV.

How to activate Auto Channel Search on LG Smart TV:

  • Using the remote control, press the Settings button.
  • Select the menu item (Icon “Gear”) in the upper right corner of your TV screen.
  • Find the section “All settings”.
  • In it, select the “Channels” item, then click “Search for channels and settings”.
  • Click on “Autosearch”.

Important: To connect digital television, the DVB-T / T2 source must be specified in the “Receive mode” column. For satellite or cable connections. appropriate sources.

  • Select the required source, click the “Next” button.
  • It will take a few minutes to find and tune channels. Do not turn off the TV in the process. When finished, click on the “Finish” or OK button (depending on the model).

How to tune channels on your TV Lg, not supporting function Smart TV: step-by-step instruction

Manual tuning on LG Smart TV

Channel tuning on older LG TVs is slightly different, but also not difficult for the owner. Here’s what you need to do for this:

  • Using the remote control, press the Settings button.
  • In the settings menu displayed on the TV screen, enter the “Channels” section.
  • On the remote control, press the “Right” button, you will find yourself in the “Autosearch” item. Confirm the action by clicking OK.
  • Select an input source for program setting. It can be Antenna, Satellite or Cable TV. To tune digital channels, select “Antenna”.
  • Click the “Execute” button on the screen.
  • It will take a few minutes to find and tune channels. Do not turn off the TV in the process. When finished, click on the “Finish” or OK button (depending on the model).

Problems that may arise when connecting an antenna to a TV Lg and channel setup:

  • TV does not see any channel.

What to do? Check if the antenna is connected correctly, if the signal source is correctly registered in the “Settings”.

  • No digital TV signal.

What to do? Change location in “Settings”.

What to do? Changing the frequency range and resolution of the TV screen may help. To do this, you need to change the screen format in “Settings” to “Original / Auto.” (depending on model) or Full Screen.

How to connect a TV with built-in t2?

Connect the antenna cable to the antenna input of your digital TV (which has a built-in DVB-T2 tuner). Plug in the power supply and turn on the TV. In accordance with the instructions for operating the TV, go to the appropriate section of the TV settings menu and activate the digital tuner.

What to do if the TV does not find digital channels?

To do this, you need to reset the tuner settings (built-in or set-top box) to factory settings and re-search for digital TV channels; download new firmware for your TV or set-top box; update your satellite TV access card if you are using a device with pay TV channels.

How to catch digital channels without a set-top box?

The only way to watch terrestrial digital TV without a set-top box is to purchase a TV that supports the DVB-T2 format. CRT TVs do not have this tuner by default. As for plasma and LCD TVs, the first models with such digital tuners appeared on the Russian market in 2013.

How to switch to digital TV?

The procedure for switching to digital TV

  • Turn off the TV and connect the antenna cable and then the video and audio cables of the TV to the receiver.
  • Turn on the TV and select the desired input source in the menu settings: HDMI, AV, SCART and others;
  • Turn on automatic search for digital channels.

How to tune digital channels on your LG TV?

Setting up digital TV on LG TVs

  • Press the MENU button on the remote control to start setting.
  • In the window that appears on the TV, select the SETUP tab, press the OK button.
  • In the menu that appears, select the OPTIONS tab and press OK.
  • Select the country RUSSIA and click OK.
  • Then go to AUTO SEARCH tab and click OK.

How to set up DVB t2 on your TV?

  • We connect an external antenna to the input of the set-top box (TV IN, ANT IN).
  • We connect the set-top box with TV with low-frequency cords (HDMI, SCART, tulips; depending on the model of the receiver and the presence of inputs on the TV).
  • Turn on the power on the receiver (the largest button on top).
READ  How to broadcast on LG TV

What to do if the channels on the TV are missing?

What to do if the channels on the TV disappeared?

  • Take the remote control, press the “Menu” button, select the “Options”. “Auto-tuning” section.
  • You will see a window with a list of signal sources. antenna or cable.
  • A window with a list of signal sources appears on the TV screen.
  • Go to the “Search Mode” section.

Automatic search

When trying to catch a new signal or switch to a different broadcasting grid, it is worth starting automatic channel detection:

  • Go to “Settings”.
  • Go to “Channels” and in the list of signal sources select “Satellite”.
  • Click on “Satellite Settings”, check the set parameters and tap on “OK”.
  • It remains to select “Autosearch” and wait for the end of the process.

Important! Access to paid TV programs is obtained by connecting a CI card.

Switch language

For easier navigation between menu items, switch to your native language. If it is installed by default, go to the next item. For others:

  • Turn on the TV, press the “Home” key on the remote control. Depending on the model, it is shown as a house.
  • Open the settings section and go to the image of a suitcase with a key / gear or select the “” menu, depicted as three vertical dots.
  • In the submenu, find the line “Language”, click on it with the “OK” key on the remote control and select “Russian”.

Note! LG TVs targeted for sale in the CIS countries have the default language of the “home region”.

Setting up your LG TV for the first time

Presetting your LG TV is necessary to coordinate the user, register the device on the network and access the current list of TV programs.

Change of time and date

To avoid software glitches or authorization errors on individual resources, it is recommended to set the correct time:

  • Click on “Home” again.
  • Open “Settings” and select “”.
  • Go to the “General” tab.
  • Go to “Time and date”, change their settings.

In this tab, they also activate the on / off TV on schedule and set the sleep timer.

How to set up cable

Finding cable channels is the simplest:

  • Connect antenna.
  • Go to “Settings”. “Channels“.
  • In the list of signals, select “Antenna” and start the search.

The TV will automatically search for digital and analogue broadcasts.

Automatically

Autosearch does not require the user to enter data to search for multiplexes. it checks all possible frequencies from the specified region and adds both digital and analog TV channels to the list. To initiate an automatic check:

  • Open the system menu and select “Settings”.
  • Visit the “Channels” tab.
  • Select “Automatic search” and check the box next to the search for digital broadcasts. Leave a checkmark next to the addition of analogue TV channels (the quality of the channels is worse).
  • Tap “Start Search”.

This method takes longer due to frequency coverage to search, but finds fewer TV programs or adds an encrypted signal. When the process is complete, the user will be able to reorder the TV channel list manually.

Choice of country of residence

If the TV has not yet been connected to the Internet, the wrong region will be set on it, which contributes to problems when searching for digital broadcasting. To change the region of residence:

  • Press “Home” on the remote control.
  • Go to “Settings”.
  • Expand the “” additional menu. three vertical dots.
  • Go to “General”.
  • Open “Country” and select the region of residence.
  • Restart your TV (turn off and on).

How to tune satellite channels

TVs from LG can receive satellite television without using tuners, subject to the support of the DVB-S2 broadcast format. this will be indicated in the official specifications of the model, noted on the branded box.

Setting up digital channels on LG TVs

Digital TV is very popular among the residents of Russia. Free channels are available to many people around the country. In addition, you are protected from interference that can occur with conventional terrestrial television, since the digital signal does not depend on any external factors, including the weather.

After the advent of DTV, companies began to form that are ready to set up a TV for a certain amount of money. But the fact is that you do not need to contact their services, since if you follow the instructions, you can set up digital and terrestrial channels yourself.

In order to watch free TV channels, the TV must have a built-in tuner. TVs of the LV company, both new and old, mainly support these parameters, so it will not be difficult to configure them. However, if you are not sure about the capabilities of your own TV, then you need to open the characteristics and find such parameters as DVB-C or DVB-T2.

There are 2 ways to tune digital channels on LG TVs: fast and long. In this article, we will cover both methods.

Quick setup for LG TVs

After the data is found, you can watch all the free channels that are available in your area.

Long way

Some data will not need to be driven. It depends on which country you have chosen.

  • The TV may then ask you for more information. If you agree, check the box.
  • Digital only. will only search for DTV channels. Otherwise, theirs are ethereal;
  • Auto numbering. will automatically order the items found;
  • Skip encrypted programs. won’t tune paid channels.
  • Run a search. After a while, the available TV and radio channels will be displayed. It usually takes 15-20 minutes.
  • Almost all LG TVs have an auto-update function. If you do not want to constantly reconfigure your TV after it automatically resets everything, disable this feature. To do this, you will need:

    • Go to settings;
    • Go down to the “Digital cable settings”;
    • Turn off auto-update.

    How to install on Samsung or LG Smart TVs

    Before starting to use all the functionality of the program, you must do the following:

      download the Zone to your computer from the official website;

    How To Rescan Channels On An LG TV

    install using the downloaded archive;

    in the opened movie directory, select the desired file and download it to your computer;

    in the application settings, it is necessary to indicate the ability to show the movie on devices with DLNA server support.

    Then, during playback, the image will be transmitted to the TV via the pre-configured LAN.

    You can also use the mobile version of the Zona website. However, such viewing requires a stable and high-speed internet connection. In this case, you just need to go to this site through the browser and run the desired movie.

    Zone program for Smart TV: how to install on a Samsung or LG TV

    Among the many applications for viewing content for free, the Zone program is popular. It is widely used on computers and mobile devices, however, if necessary, it can be an excellent help when organizing viewing on Smart TV.

    TV channels do not work

    Errors in the broadcast of television channels may be due to a change in signal providers or with an untimely program update. The only thing that can be done in this case is to update. If the operation did not help, then the problem lies in an external source.

    Using the Zone program on TVs with Smart TVs

    Zone for Smart TV allows you to find the content you want without the need for a paid subscription. Almost all films and TV series are available absolutely free of charge. The application can be used on any Smart TVs from Samsung, Philips or LG.

    The zone can work well even with ordinary TVs that have a digital receiver, Blu-ray player, special set-top boxes or small computers. All this opens up access to the connection of the TV to the computer, which is considered the main condition for the correct functioning of the Zone.

    Before using the application, you must download it to your computer. You need to download a special version for Smart TV directly from the official website of the program.

    READ  Can I Connect My Phone Camera To Laptop

    Zone application. what is it

    The Zone application is a special program, after the installation of which, the user is given access to the wide possibilities of the Internet. Here you can watch movies and TV shows online for free, as well as download them to disk. Additionally, it is possible to listen to music from various sources.

    A convenient sorting of films and TV series by genre, ratings and release year has been developed here. The ability to add content to the Favorites folder allows you to create your own library.

    In addition to the standard set of films for such programs, you can also watch television channels, listen to the radio and find the desired sports broadcasts. Such functionality, a small amount of advertising and constant updates make the program one of the most advanced platforms for online viewing and downloading of content.

    Usually the program is used on computers and mobile platforms, but it is possible to use the functions on TVs as well. It should be noted that such an opportunity will require the user to carry out a number of additional manipulations.

    It is now impossible to directly download the Zone to a Smart TV. However, you can use the special DLNA technology. Using wireless WI-FI networks, a computer and a TV can be combined into a single system. And then you can use the Zone through a computer.

    Possible problems

    Using Zona software for LG Smart TV can be complicated by a number of problems that arise. Let’s consider the most common ones.

    There is no picture

    This problem occurs when connecting via a set-top box.

    Even if the antenna does not work, there should be an image of the set-top box menu on the TV screen. If not, the problem might be one of the following:

    • wrong connection (wrong video input);
    • problems with the cable or connectors;
    • prefix not included.

    The first step is to check the receiver. When the device is switched on, there is a green or red indicator light. If the set-top box is connected, but there is still no image, you should make sure that the connection is correct.

    • Most often, the receiver is connected using an RCA cable with three tulip connectors of different colors: white, red, yellow. If you are using an RCA cable, make sure that it is not connected to the output, but to the input of the TV. The input is indicated by the INPUT (I) pointer. output. OUTPUT (O).
    • Older TVs may not have a port for the red tulip, in which case it is simply not used. On TVs with universal input, green-yellow can be used instead of the yellow connector. This input can also be used.
    • Some TVs have a “comb” input instead of the RCA input. Usually digital receivers do not come with a cable to connect to this input. In such cases, you should purchase an RCA. SCART adapter. modern TVs can be connected to the set-top box using an HDMI cable. The picture with it will be clearer, and the sound is clear.

    If the TV and set-top box are connected correctly, but the receiver menu still does not appear on the screen, you should make sure that the correct video input is connected. Switching is carried out by pressing a button on the TV remote control, which in different models can be called:

    • AV / TV;
    • AV;
    • INPUT / OUTPUT;
    • graphic image of a circle with an arrow.

    How to install satellite broadcasting?

    The satellite signal is received by the satellite dish. It is installed in a specially prepared place:

    • on the balcony;
    • on the roof of a private house;
    • on the wall.

    The antenna installation is carried out by a specialist of the operator company or by a subscriber independently, but according to strict calculations of the location and direction of the dish. To tune satellite channels, you need to know the special connection parameters. They can be obtained from the operator providing the service.

    After clarifying the parameters, you should perform the first steps of the channel tuning algorithm. And at the stage of selecting a signal source, you should select “Satellite”. In the menu that opens, you must enter the data provided by the satellite TV operator.

    Is it possible to transfer LG from analog TV to receive “numbers” without a prefix?

    To understand how to reconfigure a TV for digital television, you need to find out if it has a DVB T2 reception module. LG models released in 2012 and later are equipped with digital modules. These devices can receive digital broadcasts without additional equipment.

    If the documentation for the device has not been preserved, it can always be found on the official website of the manufacturer www.LG.com.

    Why problems can arise and how to solve them?

    Some problems may arise when setting up digital broadcasts. But they are all solvable.

    How to switch manually?

      Before doing manual tuning, you should know the parameters of the digital channel:

    • frequency;
    • character speed;
    • modulation.

    This data can be found on the website of the digital broadcasting company in your area.

  • Then you should repeat the steps of setting up channels, but instead of “Autosearch” select “Manual tuning”.
  • In the window that opens, enter the parameters from the website of the TV company and start the search.
  • This method allows you to tune channels faster than with auto search, because the device searches within a certain range.

    What is the difference between the types of receivers from each other, how to make a choice?

    The functions of DVB-T2 set-top boxes, as a rule, are limited to receiving a digital signal and transmitting it to a TV set. They are distinguished by their low price, ease of setup and connection.

    Smart TV set-top boxes have more functions, they have:

    • internal memory that allows you to record broadcasts;
    • USB port for connecting a flash memory or external drive;
    • support digital video streaming;
    • in most cases, they are made on the Android platform, which allows you to run mobile applications on the TV, communicate on social networks, receive and send mail.

    Automatic configuration when connected via cable

    On models without Smart TV, a different channel search algorithm. Follow these steps to tune digital channels:

    • Call up the menu by pressing the corresponding button on the remote control.
    • Select the section “Options”.
    • In the window that opens, select the country “Russia”.
    • Go to the “Settings” menu.
    • Select “Autosearch”.
    • In the window that opens, select the connection method “Cable”.
    • In the new menu that opens, indicate the type of search: “Full”.

    Some models may have additional settings, you need to set the values:

    Skip encrypted programs not
    Setting is digital only Yes
    Auto numbering Yes

    After the end of the search, all channels available in the city will appear on the TV.

    How to upgrade to DVB-T2 on older models with a regular home antenna?

    Digital terrestrial television can be received by almost any antenna. There are no special antennas for receiving a digital signal. You can use the old one that was installed earlier to watch analog TV. Any decimeter antenna and the so-called “Polish” antenna will also work.

    LG TV models released earlier than 2012 are not equipped with a DVB-T2 tuner and cannot receive digital broadcasts on their own. How to reconfigure these models to digital? This requires an external receiver attachment. They can be broadly divided into two types:

    • DVB-T2.
    • Smart TV receiving on-air channels and streaming video.

    The antenna is included in the set-top box, and it is connected to the TV.