How to Connect a Phone Screen to a Laptop

Working with AndroidScreencast

When the device is successfully detected by the system, open the folder with the AndroidScreencast application and launch it by double-clicking on the androidscreencast-VERSION-executable.Jar file, where VERSION is the application version. After a few seconds, a window should appear with the screen of your phone or tablet.

In the window, you can control the device using the computer mouse. To return to the screen, right-click within the display area of ​​the screen. Click on the menu option “Explore” at the top of the window to Access files on your Android device.

If the buttons on your device do not work “Incl. / Off.”, “Volume” and “Volume-“, they can also be accessed through the application by clicking on the menu option “Execute keycode” at the top of the window. Select the required command from the list and press the button “Execute” at the bottom of the window (in the picture below, the highlighted command simulates the button “Incl. / Off.” Devices).

Phone / tablet setup

To connect AndroidScreencast to an Android device, USB debugging must be enabled and it all depends on the state of your device.

If USB debugging has already been activated before, then you are very lucky and you can proceed to the next section of the article.

If your gadget has a partially non-working screen, Try to activate the option in the settings of your phone / tablet. “USB debugging” (Settings For Developers USB Debugging). Read more in the article “Transferring the mobile phone screen to the computer. Controlling your phone from your computer” In chapter “USB connection”.

If the screen of your device is completely broken, then you should use the instructions “Enable USB debugging on Android device with broken screen”.

For advanced users

Androidscreencast can also be run from the command line, then you can see technical messages that allow you to better understand the interaction of the application with the Android device. The folder with the application should lie in the root of the C drive. Run the command line and execute the commands one by one (instead of VERSION, type the version of the AndroidScreencast application):

In the command line window, you will see messages about the AndroidScreencast operation and the interaction of the application with the phone / tablet, and a window will appear with the screen of your Android device, where you can control it.

PC connection

Connect your Android device to your computer using a USB cable. If you have Windows 8.1 or 10, the phone / tablet should be automatically detected by the system and the necessary drivers will be installed (the main thing is to be connected to the Internet). If you have Windows 7 or lower, most likely you will have to install the drivers yourself. Visit the official website of the manufacturer of your Android device and look in the Support section for software for it. Usually the necessary drivers are installed along with this software.

Preparing AndroidScreencast

Download the archive for your operating system from the Official page of the AndroidScreencast application.

We will unpack the application into a folder convenient for you. This is optional, but for Windows users we recommend unpacking the application folder to the root of the C drive, then it will be more convenient to work with it in the command line.

Androidscreencast. control phone with broken screen

Androidscreencast is another way to access a broken Android phone or tablet using a computer via USB. AndroidScreencast devices and setup is very similar to the earlier blog-related Droid at Screen app.

  • Cross-platform software (works under Windows, MacOS, Linux);
  • Does NOT install additional applications on the Android device.

Before proceeding, we highly recommend that you first read the instructions for working with the MyPhoneExplorer program, since it supports devices with Android 4.1 and lower, and also provides access not only to the device screen, but also to all the data available on it (files, contacts. SMS messages, etc.), and also allows you to save them to your computer.

Preparation for work

Further steps for setting up AndroidScreencast will be given using an example of work in Windows, in other operating systems, proceed by analogy.

Install Java

Check the installed Windows programs if Java is installed on your computer? If not, download it from the official site and install. AndroidScreencast requires at least Java 8 to run.

Troubleshooting

An error may appear instead of the phone / tablet screen “Can not initialize devices list. Try to choose correct ADB path or reconnect your device”.

Close the window, Make sure that the folder with the AndroidScreencast application is located at the root of the C drive, start the Windows command term (located in the Start menu), type the command (instead of VERSION, type the version of the AndroidScreencast application):

And press the key “Enter”, then type the command:

And press again “Enter”.

Among all the text that appears, we are interested in the daemon started successfully line, which means the successful launch of the service “adb”, required for the application to work.

Re-run AndroidScreencast. If it doesn’t help, try the solution from the article “Phone screen broadcast via USB does not work, or how to remove an Android emulator”.

Limitation of Wi-Fi operation (miracast)

On Android, miracast support was added starting with version 4.2 on October 29, 2012. The first certified consumer devices that supported the Miracast standard were LG Optimus G, Pantech Vega iRon, Samsung Galaxy S III, Google Nexus 5. This means that not all mobile devices support this function.

In Windows 10, this function appeared with the Aniversary update, in earlier versions this function also does not work.

If we talk about Wi-Fi adapters, these are devices supporting the 802.11n standard. Devices previously NOT supporting, now (after updating the firmware, for example) will already support this technology.

How to broadcast your phone screen to PC

In order to display the phone screen on a PC, you need both of these devices to be connected to the same Wi-Fi network.

After making sure that the devices are connected to the same network, you need to name the notification icon and click “connect” in the window that opens.

If you DO NOT see the connect icon, most likely you have not installed the Anniversary update. After clicking, the next window will open in which you need to click “projection to this computer”. Next, you need to set the settings to “Available everywhere” and “Every time you need to connect”, if you wish, you can also enable the PIN code for additional protection.

Next, we turn to the phone. Open “Settings / Network and Connection” in it, click ” / Wireless Display”.

We turn it on. After that you will see a list of available devices to which you can transfer an image of your phone’s screen. Select a device and connect.

On the computer screen you will see a pop-up window asking permission to connect the device, click yes.

Next, you should see a projection preparation window.

After, the image of your phone screen should appear on the computer display. Protected content will not be viewable, and we will also NOT be able to use our PC’s mouse to control the device’s screen.

You can see more about this in the video of our Hetman Software channel on Youtube.

How to display Android phone or tablet screen on Windows PC (miracast)

Read how to broadcast a phone screen to a computer monitor using standard Windows functions. How to do it from another Windows 10 PC The Anniversary update in Windows 10 brings an interesting new feature. Any PC can now act as a wireless receiver, allowing you to view the display from your smartphone, Android tablet or second computer, laptop and Windows phone.

How to do it from another Windows 10 PC

To connect from another computer running Windows 10, you just need to search for devices NOT from your phone, but from your computer. Click on the notification icon, click “connect”. The PC on which this feature is enabled should appear in the list. Click on it to connect.

READ  Can I Charge Laptop By Charging From Phone

Once connected, you will see a few more settings. You can check “Allow keyboard or mouse input connected to this display”.

Another Miracast connection in Windows 10 can be done by pressing the WinP key. There are different options for the displayed image on the screen.

To change the mode, you just need to select another. By default, it works in Loop mode and duplicates your screen image. Instead, you can expand the screen or choose as a second monitor or use only the second screen.

Displaying the screen by means of the OS

This method can be used by PC owners with Windows 10.

Among the programs and applications, you will find the function you need under the name “To plug”.

An open window will show the computer is ready for synchronization.

Now go to phone settings. For those devices that have the function “Broadcast” just activate it and the smartphone screen will appear in the application window.

To control the smartphone screen on a computer, connect a physical keyboard, but may not work on all devices. In my case, it works every other time.

Devices with NO open function “Broadcast”, can use the app if they support Miracast (wireless) technology. It will launch this hidden function. All apps are available on Google Play.

AirDroid App

In this case, you will need Not only an application for a smartphone, but also a program for a PC or you can use a web service on the official website of AirDroid.

This method can be used by Owners of any operating system: Android, iOS, Windows, Mac OS.

Application and program features:

  • Displaying the smartphone screen on a PC
  • Device management locally and remotely
  • File sharing
  • Receive notifications from phone to computer
  • Ability to answer calls and SMS from a computer

Here you will have to register an account, which must be the same for both devices. E-mail and password Must be the same in the application on the phone and in the program or web service on the desktop. details about this method are described in the article.

USB cable connection

For the next method of connecting and displaying the screen, a USB cable and a special program and application MyPhoneExplorer are used. The desktop version of the program can be downloaded from the website. The application is on Google Play and also on the developers website.

We launch the program on a computer and on a smartphone. Connect the USB cable.

When you first connect, MyPhoneExplorer will ask you to enter a username (enter any name or nickname). Further, “File”. “Connect”.

In the future, the devices will connect after connecting the cable, provided that programs are running on both devices.

We will NOT disassemble all the settings, only the one you are interested in. To project the smartphone screen, go to the program section “miscellanea” and click on the function “screen mirroring”. In the new window you will see the phone screen.

The MyPhoneExplorer program, in addition to connecting via a USB cable, can connect via Bluetooth and Wi-Fi. To do this, in the settings of the desktop program, you need to switch the communication method.

Browser screen output

This method is the simplest, but not everyone can work. Each user has a different set of devices with different operating systems and capabilities. It turns out such a bundle, a smartphone PC browser.

Screencast application is required to output the phone screen to the computer. The connection of two devices will be carried out using an IP address.

Run the application on your phone and select Screen.

Below in the Status window is a link with an IP address.

We open a browser on the computer and in the address period enter the numbers for the IP address and press the Inter button.

On the smartphone, give permission to connect, wait up to 30 seconds and the phone screen appears in the browser.

The application has a couple of more buttons with which you can display the image of the external and internal cameras of the smartphone in the browser window.

Teamviewer QuickSupport

Displaying the phone screen is possible using the good old TeamViewer program. Previously, this program was only used for PCs. With the advent of smartphones, it became possible to remotely access them.

The desktop version is installed on the computer (you can download it on the official website), and the application marked QS on the mobile phone. It is this application that makes it possible to display the screen on any computer (even a remote one), using a special ID for viewing and controlling.

  • We launch the application on the smartphone and wait for the ID to appear. Remember or write down the ID assigned to your device.
  • Open the program on a PC and go to the “Manage computer”. Register the device ID and “Connect

A projected phone monitor will open in a new window.

How to bring your phone screen to your computer. 5 ways

Hey. In this article, we will consider the question that interests many users, how to display the phone screen on a computer. Having two smart devices, you need to be able to Synchronize them with each other. This is useful in various situations: viewing images and videos, transferring files, controlling a smartphone from a computer, and so on.

To broadcast the image of a smartphone screen to a PC, we will use the means of operating systems, the necessary programs, applications, web resources, everything that can help close the issue. Let’s get started.

In custody

Once again, I want to say that not all methods of displaying the phone screen on a PC can suit every user. Here you need to consider the models of smartphones with the operating system, PC and OS installed on it, and the level of ownership of the user’s PC, respectively.

Synchronization programs

Almost every Android manufacturer has their own utility:

  • Samsung
  • Sony
  • Htc
  • Xiaomi
  • Huawei
connect, phone, screen, laptop

Let’s take a look at data recovery using Samsung as an example:

  • Launching Samsung Smart Switch
  • Connect your smartphone to PC
  • Create a backup clicked the “Backup” button
  • After creating a copy, go to the conductors to the place (click the MORE button and go to the settings to find out the path), where the backup is located and find the Contact.Spb file
  • Open the file and at the prompt “Open with” select the Kies program
  • A program with contacts will open in front of you

It’s easier if you buy or temporarily rent from someone a smartphone of the same brand as your broken one in order to perform synchronization. This applies not only to Samsung, but also to other manufacturers, so as not to perform additional actions as described above.

Copying data with ADB
(With Root)

If you have Root rights and there is USB debugging, then you can try to recover the data as follows:

  • Launching the Windows command term
  • We write commands
    adb shell
    su
    cd /data/data/com.Android.Providers.Contacts/databases/
    and look for the file contacts.Db or contacts2.Db
    Copy this file using the command to the phone memory
    cp contacts.Db / sdcard
  • Connect your phone as a USB flash drive and copy to your computer or copy using adb. adb pull /sdcard/contacts.Db
  • We open this file through the service https://gsmrecovery.ru/db2vc/

Google account.

Did you enter your Google account at the time of Android purchase? Then maybe not everything is as bad as you think if synchronization was performed. Go to one of the services to recover data:
Phone book in Contacts
Photos in Google Photos
Google Keep notes

Connecting to a memory chip (Service Center)

If the Android device is in very poor condition and it is NOT possible to reanimate it, but you need to extract the data, then you need to find a service center that can connect to the memory chip and extract all the data.

Connect USB keyboard and mouse
to Android via OTG adapter

Android screen showing image but sensor not working? Then the following solution will help you, with which you can control Android in order to Access your data and try to pull them all.

READ  ASUS laptop how to install Windows from a USB flash drive

Almost all modern Android smartphones support connecting an external USB keyboard and mouse. This can be done through a special adapter from USB to MicroUSB or from USB to USB Type C.

After connecting, press the power button to light up the screen and you can control Android using an external keyboard and mouse.

How to Pull Data if Android Display Broken?

Did you accidentally drop your smartphone or tablet and its Android display crashed or the sensor is not working? The cost of replacing it will be exorbitant, but what if you urgently need to Get all the data from it? Then let’s move on to reading this article.!

Very often on the Internet you can find a question of the following content:

The Android 1 website decided to deal with this problem, since at the moment there are any clear and formulated solutions!

With Viber

Have you used Viber on your smartphone? Great, this messenger will help you restore your entire phone book. To do this, you need to install the Viber program on your computer, if it was already installed, then great, nothing needs to be done. How to install Viber on PC is described in detail in this article.

If the Android screen is completely broken and there are images, then you have to do this:

  • Will charge your Android smartphone
  • Turn it on
  • Bring Android to the monitor with the back side (screen to you, camera to PC) to enter your account

In the “Contacts” tab, you will display all your contacts that you had on Android.

Screencast to PC or Smart TV

Starting with Android 5, it became possible to broadcast an image to a Windows 10 computer or Smart TV.

You just need to get to this function, you can try to do it using “MTP connection and screenshot” Using the mouse and keyboards as described above, or using ADB.

How to Connect Samsung Phone to Computer via USB?

Quite often, it becomes necessary to connect your smartphone to a computer. For what? At least in order to transfer images from a smartphone to computer memory. Well, someone charges sensor devices in this way. conveniently, you know. In short, the need exists. Another question is how to connect a smartphone to a computer. In this article, we will show an example based on a Samsung device.

We need a cable (MicroUSB or USB Type-C. no role to play), the smartphone itself and a computer or laptop.

Connect one side to your smartphone.

The other side is to the USB port.

Actually, the connection can be called successful. The smartphone started charging, which means everything is in order (in some cases, the gadget may NOT charge, but this does not lead to panic).

If you’re only using the USB cable and computer to charge your touch device, you can stop there. But if you need to transfer some data from a computer to a smartphone or vice versa, you need to do a few more steps.

When you connect Samsung to computer, the following message appears on the smartphone screen (after unlocking the screen):

The system asks you whether to allow access to data on the phone. For charging, you can click “Deny”, but to transfer data, you must click “Allow”. What happens if you don’t? We open “My Computer” and see our smartphone. Click on it twice with the left mouse button.

And nothing is visible, because we have denied access to the file system of the smartphone. If you GRANT permission, the file system will be available for viewing and working with it. feel the difference.

Please note that the example above reflects both the internal memory of the smartphone and the external memory card.

Now you can work with files and, for example, transfers them.

If the sign with the choice of connection does NOT appear, the computer does not see the file system of your smartphone, it is likely that the default USB configuration uses only device charging. This option is relevant if the developer mode is enabled and someone has managed to “dig” in it. The solution is this. Go to developer mode (what is it. in this article), then find the item “Default USB configuration”.

Specify “File Transfer”.

Now, when connecting a smartphone to a PC or laptop, the choice of access to data on the smartphone should appear.

How to connect laptop to phone

The situation here is slightly different. If you need to have access from a computer or “laptop” to the data that is on a mobile phone or tablet with Android OS. To do this, download and install the MyPhoneExplorer program on a laptop (client version) and phone (server version). It is imperative that both devices are connected to the same router. We launch both programs on two devices and on the laptop press “Search for devices” or the “F1” key. Next, just connect to the phone.

Iphone

  • “Settings”. “Modem mode”;
  • Turn on the mode;
  • We select “Turn on Wi-Fi”. But you can distribute the Internet in the same way through the wire. After that, just connect to the wireless network. The password will be a little lower. it can also be changed or removed altogether.

Android

  • “Settings”. “Network and Internet”;
  • “Access point and modem”;
  • Now overtake the slider to turn on the access point. To change the network name and password, click “Configure Wi-Fi hotspot”. Further, nothing is difficult, just come up with a network name and password. After that, we look for Wi-Fi from the laptop and connect to it.

Phone to laptop

Now I will try to answer the question. how to connect a phone via Wi-Fi to a laptop. Here the question immediately arises, how to do it. Usually, the connection takes place in two ways: via Bluetooth or via a USB cable. But what if you want to have access to extended folders on your computer. For example, you want to watch a movie or photos. don’t download them now to your phone, on which, by the way, there may not be room.

  • First of all, you need to allow the connection of third-party devices on the “laptop”. You also need to create some kind of shared folder to which the phone will have access. I already wrote about this in this article. If you skip this step, then connecting to a laptop you simply will NOT see anything.
  • Once the folder is configured, we need to find out the IP address of the computer. To do this, through the command period, they will write “ipconfig”.
  • We are interested in the string “IPv4”. write down or remember the number. In my case, this is 192.168.1.33.
  • We connect to the Wi-Fi network where our laptop is located. You need both devices to be connected to the same router. Download and Install a special application with ES Explorer.
  • We launch the application and go to the settings. Next, select “Network”;
  • Click on the three dots in the upper right corner and select “Create”.
  • In the “Domain” field, you can enter any name. But below we enter the IP address of our “laptop“. By the way, in this way you can also connect to a computer that is connected to the network. If you can’t connect, then enter the name of the folder that you created and “shared” through the slash.

Share internet from phone to laptop

Now let’s look at another question. how to connect Wi-Fi from phone to laptop. There is nothing complicated here, so let’s go.

NOTE! If your provider invites an additional fee when distributing the Internet, then you need to perform several actions on your computer. You can read about this in this article. no matter which provider you have, the instructions are suitable for everyone.

How to connect a phone via Wi-Fi to a laptop and vice versa?

Hello everyone, and today we will analyze all the variations of connecting a phone to a laptop via a Wi-Fi network. In fact, each of the possible connections has a completely different instruction. The thing is that the smartphone and laptop use different operating systems, which complicates our task a little.

READ  How To Flip An Image On A Laptop

Share internet from laptop to phone

Therefore, I have a detailed article about it. Do not look that it is written for the Windows 10 operating system. This instruction is suitable for all operating systems of the Microsoft family. Also, as a tip, I will say that it is best NOT to use third-party programs, but to use the command line and “BAT” files.

Adapting the tablet as a second monitor

The tablet can also act as an additional smaller monitor. Mac OS includes Sidecar technology to connect iPad via USB-C or Lightning cable.

Third-party applications will help you achieve the same result with products from different manufacturers. The most reliable option is DuetDisplay, which allows you to connect Android / iOS tablets to Mac / Windows devices.

Using the USB port

If you have a dedicated connector for the display, you can use the USB connection. For example, USB-C is suitable not only for connecting external hard drives and phones, but also monitors. In most cases, this only requires a cable.

If your laptop has USB-C, then the more common USB ports will do. With external hubs, you can not only add more, but also connect a display via HDMI and even add an Ethernet connection. This method will be especially useful when there are not enough ports to connect all the peripheral devices that were used while working in the office. However, not all laptops support USB-C video output, and only a few external keys can add support for this feature, so be sure to check the manufacturer’s manual for your specific device.

How to connect a second screen to a laptop

When working from home, the laptop screen may not be enough. Fortunately, most devices make it easy to expand your workspace, even if they have a connector for a second display. Consider options, and not requiring to buy a lot of additional equipment.

Using the connector for an external display

Many laptops have a port for connecting a second monitor. It may look like a regular connector, such as HDMI, but is often smaller. If one of the ports seems unfamiliar, it may be for connecting a display.

Macbooks and some Windows laptops have Thunderbolt, Mini DisplayPort, and Mini-DVI ports. To connect an external monitor, you need a special adapter or cable. For example, Microsoft’s Surface Book laptop has a built-in Mini DisplayPort, which can be converted to HDMI with an adapter, suitable for connection to almost any TV or monitor.

By connecting the monitor directly to the laptop

Some monitors are specifically designed to be used as secondary displays. For example, the Duex Pro, which can be attached to the back of a laptop screen and pulled out when needed. It is a convenient option, not space-consuming and, most importantly, suitable for travel.

In addition, there are portable displays designed to work from one connection (not requiring a separate power supply). They can be stored in a laptop bag and used when needed.

Transfer some tasks to your phone

Some work tasks can be transferred to a phone or tablet rather than connecting an additional monitor. You can attach your phone to a stand or wireless charger.

For example, from the phone, you can Process emails, if necessary, switch to the Inbox folder on the host computer. The phone is also suitable for tracking Slack chats, news, dashboards and other metrics, and not cluttering the main desktop.

Found a typo? Select text and press Ctrl Enter

Installing and configuring MyPhoneExplorer

To start using the application, you need to download and install a client for a computer from the official website, as well as install an Android application from the Play Market.

You can connect to a computer using a USB cable, Wi-Fi or Bluetooth.

Attention! The ability to broadcast the phone screen is available only when connected with a USB cable.

Wi-Fi connection

Make sure Wi-Fi is turned on on your phone, and that your computer and phone are connected to the same network (router). Run in your phone “MyPhoneExplorer Client”. It is advisable to set up a Wi-Fi-PIN code to protect against unauthorized access (works with MyPhoneExplorer 1.8.1 and higher).

Start the PC client application. Make sure MyPhoneExplorer is NOT being blocked by Windows Firewall. Click on “File Settings “and in the group “Connection via.” put the switch to position “Wi-Fi” and click on the “OK” button.

In the main window “MyPhoneExplorer” click “File Connection”.

Cast phone screen to computer

After the connection is established, you can sync the contents of your device with your computer. To display the phone screen on a computer, press: “Misc Phone Keypad / Download Screenshot”.

A window with a mobile phone screen will open. If the phone screen still does not appear, try this USB connection error solution. We activate the checkbox “update automatically”, so that everything that happens on the phone screen is automatically displayed on the computer.

Fun option “Show mouse cursor in phone” shows the mouse cursor of the computer directly on the phone screen, although its transfer to the computer is suspended.

If you DO NOT use the phone for several minutes and he fell asleep, you can wake him up with the button “wake up the device” (green button at the top of the window).

The buttons at the bottom of the window duplicate the system buttons of the phone: “Menu”, “Home” and “Back to”.

Bluetooth connection

Make sure Bluetooth is turned on in your phone and that the phone is paired with a PC. Before pairing, set Bluetooth on your phone so that the phone is discoverable. When setting up pairing with the proprietary utility of your Bluetooth adapter, if it provides manual configuration, select the service “MyPhoneExplorer”.

After pairing, find out the COM port number through which phone is connected to the laptop.

In settings “MyPhoneExplorer” select “Bluetooth” and specify the COM port number provided by your Bluetooth adapter utility. Click on the “OK” button.

In the main window “MyPhoneExplorer” click “File Connection”.

Phone information

Myphoneexplorer is also an information utility. In it you can view information about the smartphone model, processor, firmware, battery charge, temperature, voltage (see the first picture of the article), as well as the amount of free and occupied memory.

Contacts and SMS

With help “MyPhoneExplorer” you can add / delete contacts and even make a call directly from the program. In addition, synchronization, import and export of contacts are implemented. There is a section for displaying calls, which separately shows outgoing, received and missed calls. Text messages are divided into Sent, Sent, Draft, and Saved. With help “MyPhoneExplorer” you can create an archive of SMS messages and save to your computer.