Laptops and Tablets • Recommendations and advice


How To Connect A Microphone From Headphones To Laptop

To a laptop with one connector

The easiest method to connect a microphone to a single-jack laptop is to plug it into the last pink plug of the headset. But in this case, the laptop speakers are automatically turned off, and the headphones themselves, which are present in the headset design, will not be active. The solution may be to connect the speaker via Bluetooth.

How To Connect A Microphone From Headphones To Laptop

However, the most successful way to connect headphones with a microphone to a laptop with one input jack is to use an optional accessory.

  • Splitter. In SIMple terms, an adapter from a combined input to two connectors: input and output. When buying an accessory, it is important. Pay attention to the technical point: to connect to a laptop with one connector, the adapter must be of this type “two mothers. one father”.
  • External Sound Card. The device is connected via USB, which is very convenient and acceptable for any laptop. However, this method is used only in the professional field. Home laptops equip a splitter.

Both Methods Provide the laptop owner with two input and output connectors, which can be used like in the good old days.

Step-by-step process for setting up microphone for Windows 8 and 10

  • Press “Start” and name it on the gear icon.
  • In the window that appears, select “System”.
  • Open the “Sound” tab.
  • Find “Input” and in it click “Device Properties”.
  • Open the “Levels” tab, adjust the volume and gain, then click “Apply”. After a test recording, you can get to work.

Step-by-step process for setting up a microphone in Windows XP

  • Open “Control Panel”.
  • Go to the section “Sounds and Audio Devices”, select “Speech”.
  • In the “Record” window, click “Volume”.
  • In the window that appears, mark “Select” and move the slider to the very top.
  • Click “Apply”. Then repeat the test recording. If everything is in order, you can start using the device. If audio drops out or seems unclear, go to advanced settings.
  • You need to open the “Options” menu and select “Advanced options”.
  • Click the “Configure” button.
  • Check “Microphone gain”.
  • Click “Apply” and test the sound again. The microphone volume may need to be lowered slightly.

How to setup?

Having figured out how to connect a headset to a laptop, you need to get acquainted with the Step-by-step instructions for setting up a microphone. This device is responsible for the sound quality. To check its parameters, you need to record your own voice, and then listen to it. This is the only way to identify the need for additional settings or to leave the set parameters unchanged.

To create a test record, follow the Step by Step Instructions.

  • Press the “Start” button.
  • Open the “All Programs” tab.
  • Go to the folder “Standard”.
  • Select the term “Sound Recording”.
  • A new window will appear on the screen with a button “Start recording”.
  • Then a few SIMple and complex phrases are spoken into the microphone. It is also recommended to sing the verse or chorus of any song. Recorded voice information must be saved.

After listening to the audio recording, you can understand if additional sound adjustment is required.

If all is well, you can start using the headset.

If additional configuration is required, it will take a little time, especially since each Windows operating system is equipped with individual options and the location of the necessary parameters differs.

How to connect a microphone to a laptop and set it up?

Today the microphone is an integral part of the life of a modern person. Due to the different operational characteristics of this device, you can send voice messages, perform your favorite hits in karaoke, broadcast online game actions and even use them in the professional field. But the most important thing is that there should be NO malfunctions during the microphone operation. To do this, you need to pay special attention to the principle of connecting the device and setting it up.

To PC with two connectors

Despite the love for the classic way of connecting a headset, many people want to use a microphone with a combined type of connection.

An adapter is also required for this purpose. Only it looks a little differently: on one side there are two connectors with pink and green rims, on the other. one connector. The indisputable advantage of this accessory is the impossibility of getting tangled in the sides of the splitter.

When buying an adapter, it is important to check that the plugs and input connector are of standard dimensions, namely 3.5 mm, because SIMilar accessories with smaller dimensions are used for mobile devices.

The price of such an adapter is about the same with the opposite models. But in any case, this is the minimum contribution to use your favorite and proven headset.

Connecting with a cord

In the near past, portable PC models only had a wired connection for microphones, speakers, and other types of headsets. Multiple standard-sized audio jacks acted as audio input and output.

The input connector received the signal from the microphone, digitized the voice, and then output it to headphones or speakers.

READ  Can I charge my laptop via USB

On the constructive side, the connectors did not differ. The only difference between them is the color border:

  • The pink rim was for the microphone input;
  • The green rim was the output for headphones and other options for an external audio system.

Sound cards of stationary PCs are most often equipped with connectors of other colors, each of which has a specific purpose. For example, line-in or optical-out. It was impossible to find such bells and whistles in laptops. Their small size did NOT allow the integration of even one additional input or output connector.

However, the rapid development of nanotechnology led to the fact that laptop manufacturers began to use combined options for connecting audio systems to portable PCs. Now the laptop connector began to work on the 2-in-1 principle, namely, the input and output were in the same physical connector. This connection model has many undeniable advantages:

  • Economical attitude to the body of the device, especially when it comes to miniature ultrabooks and transformers;
  • The ability to combine with a telephone headset;
  • It is NOT possible to mistakenly connect the plug to another socket.

For this reason, the option of buying a new headset is no longer needed. And the option of connecting via USB is irrelevant.

The only right decision would be to purchase an adapter for connecting the headset with laptop PCs. And the cost of additional equipment will be much less than a new high quality microphone.

Modern man pays special attention to the wireless method of connecting an audio headset. It is very convenient to sing, talk, call up with such microphones. However, professional gamers prefer wired samples. Bluetooth technology, of course, guarantees a high-quality connection, but still there are times when the reproduced voice is lost or clogged with other waves.

How to connect a wireless model?

All models of modern laptops are equipped with Bluetooth technology. It would seem that a wireless headset with a microphone solves a lot of connection problems: there is no need to spend money on adapters, worry that the size of the connector did not fit, and most importantly, you can safely move away from the source of connection. And yet, even such perfect devices have several nuances that are worth Paying attention to.

  • Sound quality. Portable PCs do not always have a high-quality sound function. If the laptop adapter supports aptX technology, a wireless headset may be considered. In this case, the accessory itself must also support aptX.
  • Sound delay. Such a disadvantage mainly pursues models with a complete lack of wires, for example, Apple AirPods and their analogues.
  • The wireless headset needs to be charged. If you forget about recharging, you will have to say goodbye to entertainment for at least 3 hours.

Wireless microphones are the best way to get rid of unwanted wires. It’s easy to connect the device:

  • You need to insert batteries into the headset and start the device;
  • Next, pair the headset with a laptop;
  • DO NOT forget to charge your device on time.

Any upgraded software is NOT required to establish a wireless connection of the headset.

For microphones that require configuration via a special application, the program download file will be located on the disk supplied in the kit. After installing it, the microphone will automatically adjust.

A step-by-step process for setting up a microphone for Windows 7

  • Right-click on the speaker icon near the clock.
  • Select “Recorders”.
  • Click “Properties”.
  • Select the “Levels” tab and adjust the volume.

How to connect headphones from phone to computer (Windows)

All headphones from the phone have one combo jack (headphone / microphone). And when connecting the phone headset to PC, there are 2 options.

  • Combo plug to combo jack. If the headphones do not work, we do the setting.
  • Combo plug to separate jack (separate microphone and headphones), connect via adapter.

How to connect headphones with a microphone to a computer

To connect headphones with a microphone to a computer or laptop, you need to correctly “make friends” the headphone plug and the corresponding connector. Problems arise when one combo jack (headphone / microphone) needs to be connected to two separate headphone jacks and a separate microphone jack. Or vice versa. This can be fixed with adapters.

Consider the problems with connecting wired headphones to the PC and the resulting problems.

  • One plug → in 1 or 2 connectors
  • How to connect headphones from phone to computer (Windows)
  • Connecting headphones with a microphone to a laptop. one and two jacks

How to connect headphones with a microphone to a computer

With one plug → in one or 2 connectors

You can have 2 options for connecting headphones with microphone to a PC with a different (combo) plug. Single or double connector.

1. Combo single jack (headphone-microphone) connects → to combo single-jack (headphone-microphone) = headphone and microphone Should work immediately after connection. If not, we do the setting.

Purpose of the circles on the combination plug.

Combo (combined version) connector. headphone microphone

2. Combined single jack (headphone-microphone) is connected → to a split jack (separate headphones and a separate microphone) = for normal operation of headphones and a microphone, an adapter from 1 jack to 2 is needed.

How to connect headphones from the phone to the computer so that the microphone works

If after connecting the headphones from the phone to the computer, the microphone does not work, and you are sure that the plug is connected to the correct connector, you need to make the setting on the computer.

Connecting headphones with microphone to laptop. with one and two connectors

Connecting headphones with a microphone to a laptop is no different from connecting a headset to a stationary computer. With only one exception:

3.5 mm headphone input

As you can see, modern laptops have a separate microphone jack for convenience and space saving. I only offer one 3.5 mm headphone / microphone combo (there is a separate microphone jack).

1. And if your headphones have 2 plugs, then the easiest way is to purchase the Corresponding adapter. They are different (with a wire, without a wire), and are inexpensive. By the way, there are those that allow you to connect 2 pairs of headphones to 1 audio jack.

Adapter from 2 connectors to 1

2. Separate connectors for a microphone and headphones can be found today only in old laptop models (or in gaming laptops):

Old laptop model with split connectors

If you need to connect a combined plug (one headphone microphone) to the separate connectors, this is also solved with an adapter:

READ  Incorrectly Typing Keyboard On Laptop

Adapter from 1 slot to 2

Connecting Bluetooth headphones to the laptop

There is a slight difference in how to connect bluetooth headphones to a Windows 7 and 10 laptop. First, we consider an example with a “ten” (connect JBL headphones to an Asus laptop), and then with a “seven”.

  • Bluetooth is turned on by a keyboard shortcut or in the tray for about hours. The button combinations differ depending on the specific laptop model, but the essence is the same: the “Fn” key is one of the F-buttons, which, in addition to the number, has a Bluetooth icon. After that, we check if the function was activated in the same tray.
    1.1 In Windows 10, click on the side menu button (to the right of the clock) and look for the Bluetooth block at the bottom of this menu. You may need to click Expand. Found. click, we see activation. 1.2 In Windows 7, the Bluetooth icon is in the general tray to the left of the clock. You may need to press the “^” button to show hidden items. Accordingly, we activate the function there.
  • How to turn on the search mode in the headphones is described in detail in our corresponding instructions.
  • Find the Bluetooth icon in the tray, right click. add a device.
  • Next, there is a difference in connecting wireless headphones on Windows 10 and 7.
    4.1 Windows 10. The panel for adding devices opens. Select “Add Bluetooth or another device.” In the window that opens, select Bluetooth again (the first item). A list of available devices will open. In rare cases, you may need to enter a code. By default: 0000 or 1111. You can see the instructions for the headphones.
    4.2 Windows 7. The search window immediately opens, we wait and select our headphones. In rare cases, you may need to enter a code. By default: 0000 or 1111. You can see the instructions for the headphones. This is true for the top ten as well. Maybe. I have not seen this before. # 128521;
  • After connecting Bluetooth, the headphones will be automatically configured by the system, in Windows 10 you need to wait for the process to finish. The status in the device panel should be “connected”, not “paired”. And, accordingly, “music” or “voice and music”, depending on the presence of a microphone.

1.1 How to connect wireless bluetooth headphones to laptop.

Solving minor problems

If at some stage it was not possible to connect wireless Bluetooth headphones to the laptop, there are solutions to the main problems below.

How to connect wired headphones to a laptop on Windows 7, 8, 10

On the example of a Lenovo laptop and Xiaomi headphones

Of course, it’s easier to connect wired headphones to a laptop:

  • We find a 3.5 mm mini-jack or USB connector on a laptop.
  • Plug in headphones.
  • Install the driver if necessary.
  • Checking which device the sound is output to.

Let’s analyze a few nuances of how wired headphones (for example, Xiaomi) are connected to a Windows 7 or 10 laptop (for example, Lenovo).

  • Headphones can have several types of plugs. Here is the usual mini-jack and jack (6.3 mm) up to tricky XLR. But laptops usually only have 2 options for 3.5mm wired or USB earbuds. If the audio jack of your headphones is different (for example, jack 6,3 mm), you will have to use an adapter.
  • Wired USB headphones DO NOT have to be visually “identified” by the laptop. That is, no notifications should appear. They may or may not be. # 128521; When connecting USB headphones, a notification about a new device is.
  • Drivers are required for USB models. precisely, when connected to a system on Windows 10, most often they are installed automatically, in which the corresponding notifications appear. In versions 7 and 8, this does not always happen. In any case, it will be useful to “walk” to the manufacturer’s website and see if there are drivers for your model. Or install them from the included disk (if you have had headphones for a very long time. # 128521;).
  • In theory, when headphones are plugged in, sound should automatically be fed into them. But sometimes you need to switch your laptop to headphones from the built-in speakers. To do this, in Windows 10, click on the speaker icon (near the clock), then the “^” button and select the desired model. This is true for USB headphones. If your wired model is connected via the audio jack, then the standard output should be selected (Realtek).

If you do not have a speaker icon or there is an exclamation mark, then you need to check and update the drivers for your sound card. Instructions. below.

Why the laptop does not see Bluetooth headphones?

If a laptop (Windows 10, 7 or any other version) “does not see” bluetooth headphones, first of all, you should turn on (or check if) Bluetooth is turned on according to the instructions above.

Why the laptop does not see bluetooth headphones. instructions on how to connect:

  • We check if there is sound on the laptop in principle. If not, proceed to the Relevant paragraph below.
  • Reboot the system.
  • Open the device manager. Checking the functionality of the Bluetooth module.
  • We are looking for “Bluetooth”, if necessary, updates the driver.
  • Rebooting the laptop.

Open the task manager:

Let’s take a closer look at what to do if the laptop does not connect to Bluetooth headphones:

  • When checking the presence of sound, in principle, it is worth considering that sometimes the sound can SIMply be subtracted “to zero”.
  • Rebooting seems obvious, even silly, but often works. Especially if the laptop does NOT turn off normally, but goes into hibernation. As they say, seven troubles. one Reset. # 128518;
  • Most modern (and not so) laptops have a Bluetooth module by default, but everything happens. # 128521; Open the device manager.
    3.1 Windows 10. The easiest way: in the search bar (near the Windows icon in the lower left corner there is either a “dandruff” icon or a text box), type “task manager”, and then click on the result that appears. Or you can open the right panel (with the button near the clock), select “All parameters”, and in the window that opens, enter the same in the search field.
READ  How to open the floppy drive on a laptop without a button

3.2 Windows 7. Start. Control Panel. System and Security. Device Manager.
Bluetooth is usually at the top of the list.
4.1. Opening, we look at the devices. See if there is an exclamation mark next to a specific module. If yes, then open the menu of this device with the right button, select “Update driver”, then automatic search. Or if you have a Corresponding file. pointing the path on the computer.

4.2. If there are several devices, it may be that the default module is “with an exclamation mark”, then you can select another device by default in the same menu (right-click).
4.3 If there is an exclamation mark, then you can try to force update the drivers for Bluetooth, as described below. Or buy an external bluetooth module. perhaps your headphones conflict with the built-in ones (it’s old, it doesn’t work correctly, but there are no new drivers).

An external Bluetooth module may be desirable for purchase even when your laptop is not new (it supports old Bluetooth versions), but the headphones are new, with the latest protocol versions. Yes, there is backward compatibility, but a suitable module, for example, can improve the quality of communication.

How to connect wireless bluetooth headphones to a laptop. instructions

Brief instructions on the example of an ASUS laptop (on Windows 10) and JBL headphones:

  • Turn on Bluetooth on the laptop (if not turned on)
  • We turn on the headphones in the search mode for availability for detection (holding the button on or separate).
  • We open the management of Bluetooth devices in a laptop.
  • Add (look for) a new device.
  • From the list that appears, select your headphones and connect.

Enabling Bluetooth on a laptop (Windows 10):

JBL headphones connected to a laptop on Windows 10:

The laptop does not see the headphones (do not work). how to connect?

Let’s figure out how to connect wired and wireless bluetooth headphones to a laptop. Why the laptop does not see Bluetooth or wired headphones and why the headphones do not work.

  • How to connect ANY wireless bluetooth headphones to a laptop. instructions
  • Why can’t my laptop see Bluetooth headphones? # 128064;
  • How to connect wired headphones to a laptop on Windows 7, 8, 10
  • Wired headphones do not work on the laptop or do not connect. Driver (program) installation, troubleshooting. # 128187;

Wired headphones don’t work on laptop (not plugged in)

If the laptop (on Windows 10 or another version) “does not see” wired headphones, then you need to check the audio card drivers and connectors:

  • Opening the Device Manager.
  • We select “Audio inputs and audio outputs” and the desired device in them.
  • If there is an exclamation mark, updates the drivers.
  • If there is an exclamation mark, adjust the sound programmatically.
  • If it does not help, we check the functionality of the connectors.
  • The device manager opens in the same way as described above, only you need to select another device.
  • First, you can try to update the driver using standard Windows methods. Do not forget that Windows 10 independently “pulls up” and installs all the main drivers.

Updating drivers for sound:

The vast majority of laptops have a Realtek sound chip, so there are 2 main ways to update audio drivers, because they are often the main reason why headphones do not work on a laptop:

1. Download from the official website of Realtek. Download and Install, then restart the laptop. Everything is standard.

2. Install a program to automatically search for the required drivers. For example IObit Driver Booster. This application can also update the drivers for the Bluetooth module. Accordingly, we launch the application, select the necessary (audio and Bluetoooth, if necessary) drivers and start the process.

If there was no exclamation mark, then the drivers are working correctly. Of course, you can try to update them forcibly if the headphones on the laptop do not work. But it’s better to try adjusting the sound first:

1. Configuring software and driver Realtek. After installing software from Realtek, a corresponding icon appears in the tray near the clock. You may need to expand the list as described above.

2. Sound settings in Windows. If the headphones on the laptop do not work after the performed actions, it is possible that a different default device was SIMply selected, and for some reason switching to a new one did not happen. There are a lot of such “for some reason” with Windows. In Windows 7 we go along the path: “Start”. “Control Panel”. “Hardware and Sound”. “Sound”. In Windows 10, you can open the context menu on the volume icon in the tray (right-click), “Open sound options”, on the right. “Sound control panel”. Then we change the default device to headphones.

Perhaps the sound on the computer is set very quietly or is turned off altogether. You need to find the volume icon in the lower right corner, open the volume control and move all the sliders to the right or up. Pay special attention to “General” and “Sound”.

If the laptop stubbornly “does not see” the headphones even after all the software tweaks, the problem may be more physical. There are several options for technical malfunctions:

1. Broken laptop audio jack. Solved by replacing and soldering contacts. Read more about Fixing the entrance here. But it is better not to poke around and immediately carry it to the service center. Save time and nerves.
2. A non-working or burnt-out sound card (which happens very rarely) will immediately make itself felt. Sound and all connectors will not work. This could be seen at the verification stage in the device manager.
3. The headphone plug is broken. We check on the phone or other device. Solution: soldering or replacing the plug. It is better to take it to the service, it will be inexpensive.
4. The headphones themselves have broken. There can be many options here: from a broken wire to a burnt out speaker. Checking on another device. Headphone Repair Solutions. here.