How to clean your LG Smart TV

Table of Contents

Removing applications

Removing unnecessary widgets is another way to clear the memory of your Smart TV receiver. To erase applications that are no longer needed, go to the “Smart” section and select the “Change” tab. Depending on the TV model (for example, 49UJ655V, UJ630V, UH755VZD with 4K support or other), as well as the firmware version installed on the device, this section may be located on the left or right half of the TV screen. Then, when a list of installed programs and games is displayed, you will need to get rid of those that are no longer needed. This can be done in two ways:

  • via the context menu by pressing the “Delete” button;
  • by going to the “My Applications” section, where you will need to select an unnecessary widget and drag it to the upper right corner to start uninstalling.

On different models of TV sets, the procedure changes slightly. You can read in detail about how to perform this operation in the instructions for the technique.

How else can you increase your memory

It is not possible to increase the memory capacity of the Smart TV receiver by installing an additional hard disk inside. But as a solution to the problem, you can use a regular flash drive with a large capacity. The TV will recognize it as an additional storage device and will use it to swap data when loading web pages or launching videos online from an Internet browser. Also, widgets and programs can be installed on a USB-drive.

Clearing the cache

To delete the temporary files of the web browser, you need to open Smart TV, launch the web browser and go to the section with settings in the upper right corner. Here you need to select “Clear cache” and confirm the operation.

How to clean memory

You can clear the internal memory of the Smart TV receiver by erasing the cache of absolutely all installed programs, including the web browser. It should be remembered that when you delete temporary files of any widget, this application will be restarted, and to free up memory, its settings will be reset to factory settings, as a result of which you will need to log in to your account again.

How to Clean a 4K TV Screen the Right Way. iCloth vs. Microfiber | Ed Tchoi

How to free up memory on your LG Smart TV

Often, owners of LG Smart TVs with webOS operating system, when they try to open photos, videos or listen to music through a web browser, receive a notification that there is not enough memory. This is due to the fact that the internal storage of the device is full and there is not enough space to download multimedia content, as a result, the task is terminated and an error message appears. To fix this problem, you need to clear the memory of your LG Smart TV. How to do this. further in our material.

clean, your, smart

When and why you need to clean your memory

LG smart TVs, like many other brands, have a limited amount of free memory available for downloading applications and downloading temporary files when surfing the Web or performing other activities. To answer the question why TV writes “Not enough memory”, and what to do in such a situation, you need to understand the purpose of the information storage device and the reasons for its overflow.

  • Any not only multimedia, but even text content is loaded into the memory of the TV receiver before being broadcast on the TV screen. Data is deleted during playback, but sometimes this process is much slower than loading, so the built-in data storage is not enough.
  • In addition, online services available on the TV, as well as websites viewed by the user while surfing the Web, even after closing, save some information in the memory of the Smart device. Gradually, it accumulates and completely overflows the resource located in the TV receiver.

As a result of the above reasons, “smart” TV equipment does not have enough free space, and it notifies of the need to free up space for stable further work. Such manifestations are typical when downloading streaming video in an Internet browser or installing a new widget, since this is the most information-intensive software. In this case, the installation of the widget or the playback of the video recording stops, and if a failure occurred during the operation of one of the programs, the user will notice that the application is closed.

How to avoid memory overflow

There are a number of ways to prevent memory overflows.

So, if, when downloading multimedia content through a web browser, the Smart TV receiver notifies of insufficient memory, this indicates that the internal storage of the device is full of temporary files. They accumulate when running applications, playing photos or music in the Internet browser, etc. To fix the problem, you need to clear the occupied space from garbage by deleting the browser cache (you can also use applications), as well as unused software.

Why the error occurs

It is clear that this discrepancy appears only when your TV set is connected to the web (with ordinary viewing of channels, everything is fine), with all this you use the integrated TV browser in order to view at least some online video. When playing music, starting games, this error may also appear.

The issue is in no way tied to a specific website, i.e. an error message can pop up on any website. Setting up Smart TV on LG TVs for beginners. However, this message about the dilemma does not always arise and not right away. You can watch a movie on LG Smart TV for free, in this review we will figure out step by step how to do it and in what ways. How to clear memory how to clear Samsung phone memory on Android phone. Imagine you have looked at multimedia content for 10 minutes and suddenly, everything is interrupted and a notification about a memory shortage is displayed on the screen. Reloading the page allows you to correct this situation, but most likely for a short time. for a couple of minutes.

How to clean memory on TVs LG, Samsung | LG, Samsung.

IStyleSPb always has super for TVs, quadcopters, cordless vacuum cleaners and other electronics. Guys.

During normal viewing of channels, such a problem should not arise.

If you have any questions or something does not work out, write about it in the Комментарии и мнения владельцев.

Hello! I watch only TV channels on the LG Smart TV via the Internet. For 2 years everything was fine, and a month ago, exactly 40 minutes later, the TV turned off and a message appears that the TV’s memory is full and you have to turn off the TV and after a minute or two minutes turn it on again. but after 40 minutes it turns off again and everything repeats. I tried, according to your instructions, to clear the cache of the browser and unnecessary applications, but when I press the Smart button on the remote control, I click on the settings menu icon in the upper right corner of the screen, I cannot find the “Clear cache” item. Please tell me how, after pressing the book on the remote control. Smart launch on the TV the browser, which is written about in your instructions. I called the masters from SevStar twice, but they did not solve the problem, because one did not know how to open the menu, and the other said that this problem could not be solved and we needed to buy a prefix from them and then everything would be “oil painting”.

I answer to all who are confused. As soon as the Smart function is turned on (the DOMIK button. Smart) on a regular remote control or a house-shaped button on a magic-remote control (the one that runs across the screen like a mouse pointer on a computer monitor). Further! Never press the gear-shaped button (settings) in the upper right corner! Since these are the wrong settings! To get started, find at the bottom of the screen, an icon with three letters WWW (and the signature WEB BROWSER). Click on it. Further, in the upper right corner there will be three horizontal stripes (at least for me). Click on these strips. A menu will pop up, select the SETTINGS item, click on this line. Then a dialog box will open in which at the bottom, you will find the CLEAR HISTORY button. Press and wait Your memory is cleared! Unfortunately, not all models have a cache clearing (well, either I haven’t found it yet!) I hope I helped at least someone;)

There is no Smart button on the remote, what are the other options.?

Why does a memory overflow error occur??

When you look at Smart TV pages through a browser, listen to music or watch media content, the application cache sooner or later fills the internal memory of the TV. In this regard, its periodic cleaning is simply necessary.

Why the error occurs

It is clear that this problem appears only when your TV set is connected to the web (with ordinary viewing of channels, everything is fine), with all this you use the integrated TV browser in order to view at least some online video. When playing music, launching games, this error may also occur.

The problem is in no way tied to a specific site, i.e. an error message can pop up on any site. over, this problem message does not always appear and not immediately. Suppose you have watched multimedia content for about 10 minutes and suddenly, everything is interrupted and a notification about insufficient memory appears on the display. Reloading the page allows you to correct this situation, but most likely not for long. for a few minutes.

TV capabilities

With the help of LG Smart TV, the user can open pages on the Internet, like on a smartphone, laptop or stationary PC, using the browser built into the TV. Surfing the Internet using the remote control is not very convenient, although for this purpose it is possible to purchase a keyboard. Instructions on how to watch use LG Smart TV to the maximum on LG launch through. But it is very convenient to manage the built-in Internet services using the remote control. they open instantly.

The set of these services available in Smart TV depends on the owner’s country of residence and the firmware version. Now I’m on LG TV with Smart TV, it also perceives it as external memory. This is usually skype youtube, various TV channels. There is also access to multimedia resources.

How to clear TV cache

If, when you try to open websites, your LG TV displays an error, most likely the device’s memory has run out and you need to free it in order to be able to continue to use all the features of the “smart” TV. Not many people know how to clean the browser memory or how to clear the memory of an LG Smart TV, we have devoted this review to this topic.

READ  How to clean a laptop to factory settings

When an error is generated by the built-in browser, you need to clear its memory, that is, the browser cache, we will consider step by step how to do this. Unfortunately, adding memory to the TV will not work, although it would be an excellent solution to this problem. It turns out that cleaning is the only acceptable option, although there are alternative methods.

To clear the cache take the remote control from your LG and press the “Smart” button and open the built-in browser. In the upper right corner of the main page of the browser there is a tab that contains several menu sections. in this menu it is necessary to select the item “clear cache”. That is, in principle, all that is required for this operation.

If clearing the cache did not give results and the device continues to work unstable, you will need to check the relevance of the software version. If it is not possible to update the TV software on your own, contact the masters of the LG service center, they will cope with such work in a matter of minutes.

Also, each Smart TV user has the opportunity to free up memory by deleting unnecessary applications; this can be done in several ways.

Going to the Smart TV menu, hover the cursor over the application you do not need and open the options, from which select “uninstall”. After that, the deletion will only have to be confirmed. Repeat this procedure with all files, games, movies and widgets you don’t need. In addition, the deletion can be done in a different way. Go to the folder “my applications” and drag the unnecessary file to the upper right corner of the screen until you see a prompt to delete, confirm the action and that’s it, the procedure will be completed.

You can ask a question to the masters from our service center by calling by phone or by writing your question on the feedback form.

Why Smart TV is running out of memory?

The main reason for the frequent cache overflow is the limited functionality of the browsers that are installed in Smart-TV. To play any information, the program first downloads it to the internal memory, only after that it will be possible to watch a movie or start an audio recording. The cache is cleared automatically from time to time, but the device may not be able to do this quickly enough. As a result, the video may, for example, be downloaded up to half, after which the viewing will be interrupted, and a message will appear on the screen about the lack of free space in the browser cache. In this case, you have to clean it manually and then continue browsing. When cleaning, you need to take into account some features of the functioning of the TV memory:

  • If there is not enough memory, the application may close several times, after each new launch, the information starts downloading again.
  • An error will not appear on the screen if the information is loading slowly and the cache has time to be cleared in automatic mode.
  • The internal memory of the browser cannot be increased by installing any external media, be it a hard drive or a USB flash drive.
  • You do not need to clear the cache if you only use your TV to watch TV programs, and not to access the Internet.
  • Memory problems are not related to content, they can occur when browsing any internet pages and media files.

How do I clear the browser cache on my LG or other TV? For the most effective solution to the problem, you can install a newer version of the software. it may have more built-in memory. Another option is to return the settings to the factory option.

Clearing cache on Samsung TV

Owners of Samsung TVs with Smart functionality may have similar problems. If you have a question about how to clear the cache on a Samsung TV, you should look for a way not only to free up the internal memory once, but to find the reasons for its frequent overflow. There are several ways to free up the required space for applications to work correctly:

  • Removing unnecessary programs and all kinds of widgets. In the start-up version, there are often many applications that are not used by the user, but at the same time take up memory intensively. They are periodically updated by downloading additional information, which also takes up a lot of space.
  • Factory reset. As a result, all saved data is reset, this makes it possible to free up space for recording new information.
  • Solving problems with the Internet provider. In some cases, traffic is artificially limited due to the selected tariff, while TV perceives this as a lack of its own memory. You can choose a more suitable tariff in accordance with the mode of using Smart-TV.
  • Update installed programs using only new firmware from official sources. A common cause of crashes is incorrect versions of programs that overload memory.
  • Smart HUB reset, that is, complete cleaning of memory.

How do I clear the cache on my Samsung TV browser? To do this, press the Smart button on the remote control, and then press the reset start button. Select the “Reset” item in the menu that opens and wait until the operation is completed, after which it is recommended to restart the TV. After clearing the cache and resetting the settings, all saved user information is deleted.

You will need to re-enter passwords and go to personal pages in social networks. However, this will remove all the accumulated unnecessary information and ensure correct video playback via the Internet. Some Samsung TV models do not work correctly with content that has Russian-language names. In this case, the system can also issue an error signaling problems with the browser memory. To eliminate the error, a special widget is installed that helps the program to recognize the name and start a movie or audio recording.

How to clear cache on TV?

The question of how to clear the cache on an LG TV usually arises if there is a problem with insufficient memory to run media content. Smart TVs allow not only watching conventional and cable TV channels, but also going online to listen to audio recordings, watch videos on YouTube and get other information. However, when you try to launch the browser, an insufficient memory notification appears on the screen. To remove it, you need to clear the browser cache on the TV.

Clearing cache on LG TVs

You can also clean the internal memory not of applications, but of the immediate browser. To do this, follow these steps:

  • Use the “Smart” button on the remote control to move the TV to the main menu of Smart-mode.
  • Launch the browser, go to the settings mode by clicking on the button located in the right corner.
  • Select the “Clear cache” item in the menu to delete all saved files from the menu.

After cleaning, it is recommended to restart the TV. As a result, all temporary files will be completely deleted, the problem with playing any files will disappear. The operation will have to be repeated periodically if you use Smart TV functions frequently. A more reliable way is to update your browser and other software in a timely manner. This is an opportunity to increase the amount of memory, therefore, the problem with a cache overflow will occur much less often.

How to clear the cache on Philips Smart TVs?

You can clean the internal memory storage in a few minutes; this usually does not cause problems. Having figured out how to clear the cache of Samsung Smart TV, LG, Philips, Sony Bravia or other popular brands, do not forget to periodically carry out this operation before downloading movies or other large files from the network. This will avoid unnecessary problems with content playback and ensure stable operation of the device.

What caused the out of memory error??

Errors of this kind can also be associated with a “real” clogging of the system. Many users, with joy, clog the TV’s memory with third-party applications and widgets that they practically do not use. In this case, you should go through the list of installed applications and remove those that you deem necessary.

It is worth noting that this error is not caused by malware, then another question arises.

Clearing LG TV Memory

Very often TVs are equipped with a small amount of memory, so it is advisable to immediately “clean up” traces of browser exploitation and regularly delete browsing data through its settings.

So how to clean your TV:

  • First, you need to quickly dial the combination on the remote control when the TV is turned off. It is a quick press on: info, menu, mute, power. Your device will start to turn on and the English-language menu will be available on the screen, in which you need to find and select the “SmartHab Reset” item. The option is initially disabled and set to off. We have to run this option and replace off with wait. We wait a couple of minutes, then turn off the TV and immediately start it back. Now you need to start “SmartHab” and the browser again. The installation of various updates will begin, here you will need to be patient and wait for the end of all operations. After this procedure, you need to restart the browser and see that everything works.

Important! If the software update for some reason does not start, you should repeat everything from the first step. Try not to miss anything.

How can I clear LG or Samsung memory using other methods? If your TV is equipped with an external hard drive, you can do the following:

  • Detach media from device.
  • Connect it to a personal computer using a USB cable.
  • Open the antivirus that is installed on the PC. Scan disk for threats.
  • Remove detected threats, if any appeared after analysis.
  • If you cannot get rid of the problem, you can carry out preventive formatting of the media.

Important! The last point is needed only for prevention purposes. Use it if the problem cannot be dealt with in other ways.

For the same prevention, you can install an antivirus that will secure the operation of your TV.

Important! The TV can be connected to various devices that perform separate functions. With the help of additional set-top boxes on the TV, you can watch movies, listen to music, play games, etc.

Antivirus for Smart TV

Nobody forbids installing a protection program for your Smart TV, but first you need to prioritize:

  • Without hacking, you will not be able to equip your device. You can perform such operations with the device only at your own peril and risk, since such manipulations “reset” the warranty conditions, and in general can lead to breakdown.
  • Do you need an antivirus for your TV at all? Most of the new TVs run on new operating systems that differ from Android devices in a number of ways. One of these differences is the closedness of the file system. This feature is the main protection against intruders, therefore the manufacturers themselves do not release any antivirus software for their products. What for? Such a system cannot be penetrated.

Important! We advise you to refrain from installing an antivirus for your TV, since you can cause irreparable damage to the system and you will have to pay for the TV repair yourself, since the warranty conditions will no longer be relevant after your intervention in the operating system.

How to clean your TV from viruses

No need for virus checks

How-To Geek does not recommend anti-virus scanning on Smart TVs.

If Samsung thinks you need to run manual scans on your TV regularly to stay safe, then this is a compelling argument against purchasing Samsung Smart TV devices. If you already own a smart TV from this company, then this is a good argument to disconnect the device from the wireless network and use digital media players such as Roku, Apple TV, Fire TV or Chromecast.

READ  LG TV shows no signal

If Samsung wants to implement automatic background malware scanning, which is optional, then that’s perfectly fine. But asking users to manually run scans on their TVs is completely absurd, and the company is clearly doing it wrong.

Interestingly, after a while, the controversial tweet in the official Samsung Support account was deleted, but it is still available on the Internet Archive. In addition, Samsung QLED TV retains antivirus software. You can run the anti-virus scan in the General menu System Smart Security.

Clearing LG TV Memory

Very often TVs are equipped with a small amount of memory, so it is advisable to immediately “clean up” traces of browser exploitation and regularly delete browsing data through its settings.

  • First, you need to quickly dial the combination on the remote control when the TV is turned off. It is represented by quick clicks on: info, menu, mute, power.
  • Your device will start to turn on and the English-language menu will be available on the screen, in which you need to find and select the item “SmartHab Reset”.
  • The option is initially disabled and set to off. We have to run this option and replace off with wait.
  • We wait a couple of minutes, then turn off the TV and immediately start it back.
  • Now you need to start “SmartHab” and the browser again. The installation of various updates will begin, here you will need to be patient and wait for the end of all operations.
  • After this procedure, you need to restart the browser and see that everything works.

Important! If the software update for some reason does not start, you should repeat everything from the first step. Try not to miss anything.

Other cleaning methods.

How can I clear LG or Samsung memory using other methods? If your TV is equipped with an external hard drive, you can do the following:

  • Detach media from device.
  • Connect it to a personal computer using a USB cable.
  • Open the antivirus that is installed on the PC. Scan disk for threats.
  • Remove detected threats, if any appeared after analysis.
  • If you cannot get rid of the problem, you can carry out preventive formatting of the media.

Check out our other article to also learn how to uninstall an app from your Samsung Smart TV.

Important! The last point is needed only for prevention purposes. Use it if the problem cannot be dealt with in other ways.

Right Way To Clean A Flat Screen TV (LED, Plasma, & LCD)

For the same prevention, you can install an antivirus that will secure the operation of your TV.

Important! The TV can be connected to various devices that perform separate functions. With the help of additional set-top boxes on the TV, you can watch movies, listen to music, play games, etc. Special devices will help to transfer the picture. Read in our review “Which media player to choose for your TV?”.

How to clear memory on LG Smart TV?

Clearing the cache

As stated, cache is temporary files created by installed software. They store various technical information necessary for work, which is automatically deleted when the service is closed. However, some of the data is not completely destroyed. Gradually, the information garbage increases and can significantly reduce the size of the unused device memory. Therefore, it is necessary to clean the cache from time to time, erasing unnecessary stored information. There are several ways to do this.

Clearing cache and memory on LG Smart TVs

After a while, the owners of LG Smart TVs are faced with errors in the operation of the device: installed applications open slowly or do not open at all, new ones are not installed, video playback and Audi often stop. In this case, the type of Internet connection. cable or Wi-Fi, does not matter. These signs indicate that you need to clear the memory on your LG Smart TV and delete excess data from the cache. Cleaning is the only way, since the amount of memory is set during the production of the Smart TV and cannot be increased.

Steps to clear the memory of your LG TV

This step-by-step guide allows you to clear the cache on your LG Smart TV to increase the free memory of your device. Thanks to this, the speed of the Internet will increase and the number of errors will decrease.

Second way

This method of clearing the cache can be used if the content is accessed not using installed third-party applications, but through the system browser.

  • On the TV remote control using the “Smart” button, turn on smart mode.
  • Select a browser widget and open it.
  • Find the “Settings” section. Depending on the version of the operating system, it can be in the upper right or lower corners.
  • In the section that opens, select the “Clear cache” tab and click on it.
  • Confirm your desire to clear the cache again.

Clearing the browser cache

After a short period of time, wiping is complete, pages and applications will start opening, and the memory full message will disappear. If not, restart your TV.

Cleaning instructions

Additional ways to clear the memory / cache of the TV and the built-in browser:

How to clear memory on LG TV?

Many LG Smart TV owners are faced with the problem of filling up the TV’s memory when opening Internet pages or online services. It is connected with an overflow of the application cache and the built-in browser. In this guide, we will show you how to clear memory on your LG TV and restore it to normal operation.

Apparently, the most effective way to clean the memory on LG TV was left in the Комментарии и мнения владельцев. It is done as follows:

Why does a memory overflow error occur??

When you look at Smart TV pages through a browser, listen to music or watch media content, the application cache sooner or later fills the internal memory of the TV. In this regard, its periodic cleaning is simply necessary.

During normal viewing of channels, such a problem should not arise.

If you have any questions or something does not work out, write about it in the Комментарии и мнения владельцев.

Thank you very much Valera, they described the situation in a very accessible way.

I can’t clear the cache in the settings

Hello! I watch only TV channels on the LG Smart TV via the Internet. For 2 years everything was fine, and a month ago, exactly 40 minutes later, the TV turned off and a message appears that the TV’s memory is full and you have to turn off the TV and after a minute or two minutes turn it on again. but after 40 minutes it turns off again and everything repeats. I tried, according to your instructions, to clear the cache of the browser and unnecessary applications, but when I press the Smart button on the remote control, I click on the settings menu icon in the upper right corner of the screen, I cannot find the “Clear cache” item. Please tell me how, after pressing the book on the remote control. Smart launch on the TV the browser, which is written about in your instructions. I called the masters from SevStar twice, but they did not solve the problem, because one did not know how to open the menu, and the other said that this problem could not be solved and we needed to buy a prefix from them and then everything would be “oil painting”.

I answer to all who are confused. As soon as the Smart function is turned on (the DOMIK button. Smart) on a regular remote control or a house-shaped button on a magic-remote control (the one that runs across the screen like a mouse pointer on a computer monitor). Further! Never press the gear-shaped button (settings) in the upper right corner! Since these are the wrong settings! To get started, find at the bottom of the screen, an icon with three letters WWW (and the signature WEB BROWSER). Click on it. Further, in the upper right corner there will be three horizontal stripes (at least for me). Click on these strips. A menu will pop up, select the SETTINGS item, click on this line. Then a dialog box will open in which at the bottom, you will find the CLEAR HISTORY button. Press and wait Your memory is cleared! Unfortunately, not all models have a cache clearing (well, either I haven’t found it yet!) I hope I helped at least someone;)

Reasons for the Memory Full Error on LG TV

Of course, the owners of LG TVs have repeatedly faced the problem of lack of memory in the TV set. The error code appears when launching some media content. What are the main reasons for the appearance of full memory, the issuance of an error by the operating system?

First, you need to determine why the “Not enough memory” error appeared at all, how the software failure occurred.

Notification of a software failure occurs only when connected to an external source of information. the Internet. At the same time, viewing of standard television programs is still available. Sometimes the error pops up not only when connecting video content, but also when starting a game or a large sound file.

over, the error “climbs out” not immediately, but sometimes after a few minutes of use. The problem is temporarily resolved by reloading the browser page. But this is not for long. Soon it will reappear.

During streaming video playback, there is less free space for storing temporary texture files. And, the larger the file, the more complex the image, the faster this place ends.

Considering the similarity of the OS of the system to Android, Windows or the same on smartphones, we conclude that the problems are similar. Numerous programs, online services and other content, when working with the operating system, leaves cached bunches of files. They are needed to facilitate the “cold start” of the program, quick calculations, correct display of content on the page.

For the normal functioning of the operating system, to increase the speed of work, a paging file is required. It is generated automatically. But when there is a shortage of free space, the file decreases, the system cannot work quickly.

When the amount of free space decreases, the memory dump is reduced, to which the smart TV reacts with the warning window “Not enough memory”. At the same time, additional programs are no longer installed and browser pages are loaded slowly or incompletely.

There are several ways to solve the problem of free space. Unfortunately, it will not work to increase the internal memory. it is a microcircuit on the board. One of the main preventive measures is to update the operating system. The software is improved by the seller and system errors are removed. Sometimes this does not help and you have to take urgent measures.

How to clear the cache

If you are watching a long video and the “Not enough memory. Restart the Web Browser “, the thought immediately arises of how to clear the cache on LG Smart TV?

Using a regular flash drive

4 GB is enough. To work, insert the USB flash drive into the USB port on the back or side of the TV receiver. A working flash drive will flash with an LED.

The inserted flash memory works not only as a drive in the sense that programs and content are downloaded from it to the TV. A “smart” TV set immediately defines it as free memory and seeks to increase its efficiency due to the sudden appearance of free space. In particular, the browser cache immediately “flows” into the inserted USB flash drive. Newer TV models have slots for installing additional memory cards. Due to their volume, the internal memory of the TV is unloaded, part of the information is transferred to the memory card.

On first startup, new memory is not always detected. Sometimes a browser restart is required. The next launch will be successful.

How to clear memory on LG Smart TV?

Sometimes, when downloading new content or browsing the Internet, the TV will give an error and notify the user about limited download options or reduced performance. This means that you need to clean the memory of your LG Smart TV. A small amount of memory negatively affects the speed of work and the launch of programs on your TV receiver. Web pages start to load incorrectly and not fully load. We will consider the reasons for this phenomenon and ways to combat it in this article.

READ  Controlling LG TV from Android Phone

Ways to solve the memory overflow problem

To solve the problem of free space, you need to perform a few simple steps.

  • In any operating system, over time, a mass of unused or ineffective applications appears, installed “temporarily” or which “did not work”, that is, they do not like their functionality. These applications must be removed along with the accompanying files that the programs themselves create.
  • Clear the browser cache. It is not always necessary to delete the cache of absolutely all applications. To reduce the load on volatile RAM, it may be sufficient to free memory from temporary files of the browser that is used most often. In addition, the deletion of all temporary files leads to a reset of settings, deletion of passwords. As a result, you will have to log into your account again.

If you are not rooted to work with the operating system, then there is not much you can afford to increase free space. ROOT rights give full access to all programs, including preinstalled ones, overclocking the processor, and other operations. This is a program for developers, service specialists. But if you are not a specialist in working with an operating system, it is better not even to look for a program on the Internet with ROOT rights, otherwise you can ruin the device or OS by removing the programs necessary for its operation or forcing the processor to work in a non-standard mode.

How do I uninstall apps from my LG Smart TV with webOS 3.0? You need to call the menu in Smart TV, which is called by the remote control. Using the arrows on the remote control, select any application you don’t need now. Press the “OK” button, a window will appear with the inscription “Finish”. After clicking on it, a cross will appear above the program, indicating the process of uninstalling the program. After clicking on the cross, a menu with the names “NO”, “YES” appears. Press the “YES” button. The program icon has disappeared from the TV menu list. This way you can uninstall any program, free up space in the device’s memory and increase the operating system’s performance.

You can also uninstall the application using the mouse. Exit to the menu, left-click on any application and hold down the mouse button. The app seems to be jumping out of the line. Let’s release it, press the “Finish” menu window. A cross appears above the program. When you click on which pops out the menus of the window “DELETE”. “YES” and “NO”. After confirmation, the application goes to the cart.

Why the error occurs

It is clear that this problem occurs only when your TV is connected to the Internet (during normal viewing of channels, everything is fine), while you use the built-in TV browser in order to view any online video. When playing music, launching games, this error may also occur.

The problem is in no way tied to a specific site, i.e. an error message can pop up on any site. over, this problem message does not always appear and not immediately. Suppose you have watched multimedia content for about 10 minutes and suddenly, everything is interrupted and a notification about insufficient memory appears on the display. Reloading the page allows you to correct this situation, but most likely not for long. for a few minutes.

How to clean the memory of your LG Smart TV

Surely many owners of LG Smart TVs have faced such a problem as: “Not enough memory. Reload the page or go to another site. ” This notification pops up on the TV screen at the moment when the user tries to open any multimedia file for viewing, and it doesn’t matter if the Internet connection is carried out via cable or wireless connection. The thing is that the TV does not have enough memory to load multimedia content. over, this problem does not always arise, and not immediately. In case of insufficient memory, a corresponding notification pops up.

Memory features

It turns out that there is no way to expand the device’s memory. A memory card or rather an external hard drive will not help here. Samsung TVs also have this problem. This situation occurs when trying to download streaming video. TV memory is full because the image is loaded slower than online video and the required amount of memory simply does not always have time to free up. It is recommended to open those sites in which the video in a common file is saved in blocks. then memory overflow does not occur.

[LG WebOS TV]. How to clean LG Smart TV screen

There are not many options, tk. it is impossible to expand the memory of the TV, as is the case with a computer. The only way out of this situation is to install special applications on the TV that will get rid of this problem and watch movies, various videos, listen to music from the Internet through them.

You can try updating your TV software. There is a hope that in later versions there will be no such “jambs” and memory will be spent and distributed more correctly, more economically. After all, technologies do not stand still, this also applies to the development of the TV market. How to clean the memory of LG Smart TV easily and without problems?

  • Connect the TV set to the Internet, no matter what method. Can be wi-fi, modem or cable.
  • Switch to Smart TV mode using the button on the remote control.
  • A browser window will open, you must select a tab in the upper right corner, in which there will be several lines.
  • Select the line “Clear cache”. We click on the line and confirm this action and wait for the completion of cleaning.

TV capabilities

With the help of LG Smart TV, the user can open pages on the Internet, like on a smartphone, laptop or stationary PC, using the browser built into the TV. Surfing the Internet using the remote control is not very convenient, although for this purpose it is possible to purchase a keyboard. But it is very convenient to manage the built-in Internet services using the remote control. they open instantly.

The set of these services available in Smart TV depends on the owner’s country of residence and the firmware version. This is usually skype youtube, various TV channels. There is also access to multimedia resources.

Why does the device memory overflow error appear?

The problem is revealed when the user once again decides to access the Internet. Such a simple action becomes unavailable due to lack of memory.

This is due to the fact that browsers for TV do not have limitless possibilities. If the owner of the device downloads a movie for viewing, then it does not start immediately, but is first loaded into the TV’s memory. Then unnecessary information is deleted, but this does not always happen in a timely manner. As a result, data received from the Internet accumulates, interfering with the normal functioning of the device.

  • if free space runs out, launching any application becomes impossible;
  • if there is a self-cleaning function, errors will not occur;
  • it is impossible to increase the volume with the help of additional devices and a hard disk, as on a personal computer;
  • if you watch ordinary TV channels, then the lack of free space will not affect their work;
  • the error is not affected by certain applications or sites.

Lack of memory can occur on any device. Samsung Smart TV, LG, etc. There is only one way out of the situation. removing unnecessary information and unnecessary information.

Ways to solve the problem

There are several ways to solve the problem:

  • Update your software. If you install the latest version, then the memory will be allocated here more efficiently than in the old version. Thanks to this, errors will not appear.
  • Install apps that let you watch videos directly without downloading them to your device. Such sites allow you to enjoy watching the same films and videos that through a browser.
  • Install apps that will clean up memory quickly. You can also find programs that will decrease the speed at which memory fills up. Both options will save the device from the appearance of an error when accessing the Internet.

If the previous steps do not help solve the problems, you can choose a radical method. resetting the settings to the factory settings. The procedure algorithm depends on the brand of the TV.

  • click “Home”;
  • go to the settings menu;
  • go to the subsection of advanced settings;
  • go to the general settings menu;
  • select the inscription “Reset to factory settings” and click on it;
  • confirm actions.

To reset your Samsung Smart TV model, you need to follow these instructions:

  • deactivate the device;
  • simultaneously, without breaking the sequence, press Info, Menu, Mute, Power;
  • simultaneously, without breaking the sequence, press Mute, 1, 8, 2, Power;
  • after such your actions, the TV will load in service mode;
  • then immediately go to the settings menu;
  • click on reset;
  • confirm actions.

You can reset the settings for any device. If you need to perform manipulation for Sony Bravia and another model, see the instructions on how to do it correctly.

Why Smart TV is needed

When a user purchases a “smart” TV, he, first of all, expects to use the device not only for watching TV channels, but also for Internet access. With the help of such a device, you can:

  • visit any sites on the Internet;
  • watch movies online;
  • listen to any tracks and view clips;
  • watch photos and various images;
  • chat with friends on social networks;
  • communicate with friends through special video communication applications.

As a result of all these actions, the device memory becomes full.

Clearing the browser cache

The problem can often be resolved by clearing the browser cache. To complete this procedure, follow this procedure:

  • go to the main menu of Smart TV;
  • open a browser;
  • go to the settings menu;
  • find the inscription “Clear cache”;
  • confirm actions.

After that, it remains only to wait for the process to complete. When the procedure is over, the TV will work without interruption.

Clearing Smart TV Memory

Smart TVs are devices that are gaining more and more popularity every day. This is due to the fact that they immediately combine the capabilities of a TV and a computer, because the Smart TV function opens access to the Internet. You can connect a mouse and keyboard to the device for the convenience of Internet surfing. However, despite the numerous advantages, the “smart device” has disadvantages. it is a lack of memory. and more users are faced with such a problem lately. To restore the operation of the device, you need to know how to clean the TV memory. You can perform this procedure yourself, without resorting to the help of professionals.

Removing applications

Another effective way to solve the problem is to uninstall applications. This will free up the instrument’s memory and allow it to operate without interruption. To uninstall applications via the remote control, go to the Smart TV menu.

To do this, just press the show jumping with the inscription “Smart”. It is available on the device of every device, regardless of brand and manufacturer. After that, the system will transfer you to the desired section. From this section, go to the option settings. Here, check out any apps you don’t use. Then delete all data from the device memory. This will free up space, and there will be no errors when accessing the Internet.

When the TV memory is full, this is not a reason to panic. There are many ways to solve the problem, from a simple cache clearing to a factory reset. By trying this or that method, you can eventually get the TV to work. If the suggested options did not help you solve the problem, contact the service center. Experts will be able to understand what is the cause of the failure and fix the malfunction.