How to change the keyboard backlight on MSI laptop

How to turn on the backlight on the keyboard

The backlight makes it easier to work with the device at night or in low light during the day. It is especially necessary for those who have not yet learned touch typing.

You can find out if your device has this function by looking at a book with instructions for the user, or search the Internet for information about the model of your computer or laptop.

Advice! If the markings on the buttons have a translucent color, most likely there is a backlight.

MSI GE75 Raider Gaming Laptop Steel Series RGB KEYBOARD LIGHTS Brightness and Colors COSTCO #1420049

Rules for turning on the backlight on the keyboard

Basically, in laptops, the Fn button and one of the F1-F12 function keys are responsible for this function, depending on the manufacturer and model of the device. To understand which one, you can take a closer look at the drawings on the keys. However, remember that each key combination is responsible for a specific function (sleep mode, mute, etc.). To undo the actions performed, click again on this combination of buttons.

Consider methods for turning on the backlight on laptops from some manufacturers.

  • Lenovo (Z500p): Fn “space”.
  • MSI (GE60, MSI GE70). Separate key located above the keyboard.
  • Asus: Fn F3.
  • HP: Fn F5 or F12.
  • MacBook and Microsoft. The default is “automatic”. Boot Camp Control Panel is used to configure.
  • Apple. System Preferences Keyboard.

Advice! Method for users without backlighting. Purchase a miniature USB device. Or you can do it yourself on the basis of lamps, USB cables and additional strengthening means.

Attention! If you find that the laptop has a button with a corresponding pattern, but the backlight does not turn on, then the following problems are possible:

  • Lack of driver. This problem can occur when reinstalling the operating system. To do this, go to the laptop manufacturer’s website and download the appropriate driver.
  • Disable in BIOS:
  • Go to the device BIOS. Before turning on the laptop, press Fn (F2. F12, depending on the model).
  • In the configuration, select “System Configuration”.
  • Open the “Action Keys Mode” parameter.
  • A special window will open. If it contains the value “Enable”, then everything is fine, otherwise change to this expression.
  • Save BIOS settings either F10 or using “Save Changes Exit”.

How to toggle keyboard backlighting

If you think that the backlight has a bad effect on the battery charge, then you can safely turn it off. There are several ways to do this:

  • Take advantage of pressing the hot buttons that were used to turn on.
  • In the settings of the program that was used to change the color (the considered program).
  • Press the dedicated button to turn off (available on some models).

Advice! Can be set to turn on and off automatically.

  • The brightness changes depending on the ambient light, for which a special sensor is responsible. When it is shaded, the function is automatically turned on.
  • Set the time interval. After the last keystroke, after a preset interval, the lamps turn off automatically. Allows you to save laptop power, for example, when reading or watching a video.

How to change the color of the keyboard backlight

Most laptops have single color LEDs. In this case, you cannot switch the hue. Their spectrum is formed on the basis of RGB (red, green and blue) lamps.

However, if you are the owner of a model that has a shade control function, then consider the options for how this can be done.

Option 1 (for multicolor). As you already understood, the color is based on RGB lamps. To switch to the desired color, for example, in Asus, the Asus Aura program is built in. In addition, it allows you to change the saturation and brightness of the lamps.

Steel Series Engine Software. Suitable for all modern laptops. The main part of the program settings is designed for gaming mice (to increase acceleration and sensitivity). For keyboards limited to a panel for adjusting color and brightness.

READ  How To Connect A Wireless Keyboard To A Laptop

Option 2 (for monochrome). If the single-color backlight is not useful, then you can change the LED lamps. To do this, you need to disassemble the keyboard. Further on the board, change the single-color lamps to LEDs of the required color. In this case, keep in mind that the sizes of the lamps must match.

Option 3 (for monochrome). This method does not require buying colored LEDs. Disassemble the keyboard. Glue translucent paper of the desired colors on the board. At your request, you can make a single color, for example, blue or depending on the groups of buttons. As a result, the light will pass through the stickers and glow with its color, creating a muted saturated backlight.

Is there a difference between turning on the backlight on the keyboard of a laptop and a computer

The structure of the laptop keyboard is slightly different from the computer layout of the buttons and the absence of an additional panel.

But when you enable the color of the buttons, there is no significant difference. As in laptops, the same situation is observed here with laptop models and manufacturers.

Since the keyboard is connected to a PC, changing it with a backlight is not difficult, unlike a laptop. You can also select components from different manufacturers for a PC, depending on the power and price category or for what purpose you are purchasing a computer. And also manufacturers offer modern touch panels with a large selection for customization.

The backlight is a very useful function for those who like to work at night. You can diversify the same type of lighting with different colors at your discretion.

The backlight consumes energy, thus draining the battery power much faster. However, there are many more advantages of the function. In addition, lamps save energy. Therefore, you can enjoy the comfort. Make the most of your device.

A little more detail about the inner world of the program:

Here you will see all SteelSeries devices that support SSE3.

Update: Click “Update” to check for a new version.

Setting: Here user can change language. By default, system settings copy Windows settings.

To view the current software and firmware versions, click “About”.

Cloud: To edit SSE files, you need to log into the cloud SSE system (authorization required).

Click on “Library” to select the desired SSE device or configuration to suit your needs.

Click Launch to edit Macro settings.

Check the macro you just recorded, edit the waveform and delay time by clicking on them.

You can set zero or long delay.

change, keyboard, backlight, laptop

To delete a macro, click “Manage”.

View Options: Check “View Options” to hide the list of Key Zone 1, Brightness and Layouts.

Click here to customize the keyboard backlight. SSE3 now supports four brightness levels. (Including no backlight)

Illumination off. Backlight off

Only the left side of the keyboard is illuminated

The backlight is synchronized with the sound effects of the system, the volume must be greater than 30%.

Three lighting zones are switched on cyclically

Choose two colors that will periodically replace each other

Active / Sleep: User can edit backlight patterns for active and sleep modes

Sleep mode only supports Illumination off / Breathing Mode / Wave Mode / Dual Color Mode

Key Zone 1/2: Clicking on Key Zone 1 or 2 (Key Zone 1 or 2) brings up the Keyboard Editor:

User can assign the following functions to any keys (except Fn):

Calling macros edited by the user separately

B 8) and scroll up and down functions. Buttons 1-8 work according to Microsoft Windows settings. (See picture below)

Launch Application. Launch the application

Launch Configuration. Enable Configuration

In addition, 1, 2, and 3 support looping functions

Each press sends only one signal

The signal can be sent by pressing or releasing the button

One press of the button can send a signal N times

Delay between signals is configurable

Signal sending time can be configured

The signal can be sent by pressing or releasing the button

C. Repeat While Pressed. Repeat while holding

Holding the button sends multiple signals

Delay between signals is configurable

READ  Identify HP Laptop Model Online

The signal can be sent by pressing or releasing the button

Signals cannot be sent by pressing or releasing the button

D. Toggle Auto Repeat. Shuffle and repeat automatically

Sends signals after a button is pressed. Press again to stop sending signals.

Delay between signals is configurable

The signal can be sent by pressing or releasing the button

Sends signals after a button is pressed. Press any button to stop sending signals.

The signal can be sent by pressing or releasing the button

Configs: Pressing the Configs buttons will bring up an edit page where you can add / remove Settings by creating profiles with different macros and backlight settings.

SSE supports RGB color editing. To open the color editor, click in any column. User can input color code manually or choose color directly.

Preview: Preview the highlight after making changes

Layouts: Choose from different keyboard layouts

Adjusting the volume of the built-in speakers

Increase the volume of the built-in speakers.

Decrease the volume of the built-in speakers.

Adjusting the brightness of the keyboard backlight

Decrease the brightness of the keyboard backlight.

Increase the brightness of the keyboard backlight.

for models equipped with a function for adjusting the brightness of the keyboard backlight

The backlight makes it easier to work with the device at night or in low light during the day. It is especially necessary for those who have not yet learned touch typing.

You can find out if your device has this function by looking at a book with instructions for the user, or search the Internet for information about the model of your computer or laptop.

Advice! If the markings on the buttons have a translucent color, most likely there is a backlight.

How to change keyboard color on MSI

The latest version of the Steel Series Engine 3 is fitted to the GT80 / GE62. Excellent game processing and an intuitive interface will help you do everything the way it suits you best. In addition, this system is able to create archive copies of files in the cloud and update your programs and drivers in time. Before downloading SSE3, we recommend that you uninstall old keyboard management utilities.

How to change the color of the keyboard backlight

Most laptops have single color LEDs. In this case, you cannot switch the hue. Their spectrum is formed on the basis of RGB (red, green and blue) lamps.

However, if you are the owner of a model that has a shade control function, then consider the options for how this can be done.

Option 1 (for multicolor). As you already understood, the color is based on RGB lamps. To switch to the desired color, for example, in Asus, the Asus Aura program is built in. In addition, it allows you to change the saturation and brightness of the lamps.

Steel Series Engine Software. Suitable for all modern laptops. The main part of the program settings is designed for gaming mice (to increase acceleration and sensitivity). For keyboards limited to a panel for adjusting color and brightness.

Option 2 (for monochrome). If the single-color backlight is not useful, then you can change the LED lamps. To do this, you need to disassemble the keyboard. Further on the board, change the single-color lamps to LEDs of the required color. In this case, keep in mind that the sizes of the lamps must match.

Option 3 (for monochrome). This method does not require buying colored LEDs. Disassemble the keyboard. Glue translucent paper of the desired colors on the board. At your request, you can make a single color, for example, blue or depending on the groups of buttons. As a result, the light will pass through the stickers and glow with its color, creating a muted saturated backlight.

Rules for turning on the backlight on the keyboard

Basically, in laptops, the Fn button and one of the F1-F12 function keys are responsible for this function, depending on the manufacturer and model of the device. To understand which one, you can take a closer look at the drawings on the keys. However, remember that each key combination is responsible for a specific function (sleep mode, mute, etc.). To undo the actions performed, click again on this combination of buttons.

READ  How to find out if the camera works on a laptop

Consider methods for turning on the backlight on laptops from some manufacturers.

  • Lenovo (Z500p): Fn “space”.
  • MSI (GE60, MSI GE70). Separate key located above the keyboard.
  • Asus: Fn F3.
  • HP: Fn F5 or F12.
  • MacBook and Microsoft. The default is “automatic”. Boot Camp Control Panel is used to configure.
  • Apple. System Preferences Keyboard.

Advice! Method for users without backlighting. Purchase a miniature USB device. Or you can do it yourself on the basis of lamps, USB cables and additional strengthening means.

Attention! If you find that the laptop has a button with a corresponding pattern, but the backlight does not turn on, then the following problems are possible:

  • Lack of driver. This problem can occur when reinstalling the operating system. To do this, go to the laptop manufacturer’s website and download the appropriate driver.
  • Disable in BIOS:
  • Go to the device BIOS. Before turning on the laptop, press Fn (F2. F12, depending on the model).
  • In the configuration, select “System Configuration”.
  • Open the “Action Keys Mode” parameter.
  • A special window will open. If it contains the value “Enable”, then everything is fine, otherwise change to this expression.
  • Save BIOS settings either F10 or using “Save Changes Exit”.

How to toggle keyboard backlighting

If you think that the backlight has a bad effect on the battery charge, then you can safely turn it off. There are several ways to do this:

  • Take advantage of pressing the hot buttons that were used to turn on.
  • In the settings of the program that was used to change the color (the considered program).
  • Press the dedicated button to turn off (available on some models).

Advice! Can be set to turn on and off automatically.

  • The brightness changes depending on the ambient light, for which a special sensor is responsible. When it is shaded, the function is automatically turned on.
  • Set the time interval. After the last keystroke, after a preset interval, the lamps turn off automatically. Allows you to save laptop power, for example, when reading or watching a video.

Is there a difference between turning on the backlight on the keyboard of a laptop and a computer

The structure of the laptop keyboard is slightly different from the computer layout of the buttons and the absence of an additional panel.

But when you enable the color of the buttons, there is no significant difference. As in laptops, the same situation is observed here with laptop models and manufacturers.

Since the keyboard is connected to a PC, changing it with a backlight is not difficult, unlike a laptop. You can also select components from different manufacturers for a PC, depending on the power and price category or for what purpose you are purchasing a computer. And also manufacturers offer modern touch panels with a large selection for customization.

The backlight is a very useful function for those who like to work at night. You can diversify the same type of lighting with different colors at your discretion.

The backlight consumes energy, thus draining the battery power much faster. However, there are many more advantages of the function. In addition, lamps save energy. Therefore, you can enjoy the comfort. Make the most of your device.