Laptops and Tablets • Recommendations and advice

Laptops

How to apply thermal grease to a laptop processor

Table of Contents

What is thermal paste?

Thermal paste or thermal interface. a layer of a heat-conducting compound between the cooled surface and the heat-removing device.

Thermal paste is usually sold in special syringes and is relatively inexpensive.

apply, thermal, grease, laptop, processor

So. I bought TITAN Nano Grease Thermal Grease (R)

What is thermal paste?

Thermal paste or thermal interface. a layer of heat-conducting compound between the cooled surface and the heat-removing device.

Thermal paste is usually sold in special syringes and is relatively inexpensive.

So. I bought TITAN Nano Grease Thermal Grease (R)

If the heatsink stubbornly does not want to lag behind the processor cover, then the thermal paste has dried on! In order not to pull out the processor “with meat” from the socket, we do this: Put everything back in place, turn on the power supply unit, start the computer. letting it run. Turn off. This will warm up the thermal grease and allow us to remove the heatsink from the processor cover and from the socket painlessly.!

After successfully removing the radiator, we take out the processor itself (there is an iron lever on the socket), it itself is directly in thermal paste, so we do everything carefully, try not to get dirty.

How to properly apply thermal paste to your processor?

Moving on to the next, most controversial point. the correct application of thermal paste? I propose to consider three common ways:

  • Squeeze a drop of paste onto the processor and simply press down with a heatsink. In theory, it will be evenly distributed over the surface of the CPU under the pressure of the heat sink. In practice, you need to guess with the amount of paste to be squeezed out. It should be a thin transparent layer through which you can even distinguish the inscriptions on your pebble. The radiator mount should press it with equal force in all directions without skewing. If it rises even a little crookedly, then the paste can be squeezed out all to one side and the processor floor will be left without a thermal conductor.
  • Some thermal paste manufacturers ship a small plastic spatula with the tube. Apply one or more drops to the processor and spread gently. The advantage of this method is that you can visually control the thickness and uniformity of the coating. If you did not have such a spatula in the kit, you can use any plastic card, an old ruler, or even a finger wearing a rubber glove. The main thing is to try to make the layer as thin and even as possible. Do not use hard objects that could scratch the processor.

In the instructions for the thermal paste, it is also possible to find a recommendation to lubricate the surface of the radiator as well. Remember that too much paste creates poor conductivity and the opposite effect of overheating.

After applying thermal grease to the processor, carefully reinstall the cooler. It is very important to do this without fidgeting with the radiator until it is firmly in place. Now you can and should wiggle it slightly so that the paste fills in the irregularities and snap the mount. Do not be alarmed if the first days the processor temperature differs from the expected one, the manufacturers themselves give up to seven days of running-in, just wait a little.

Good afternoon, dear users of the expert club!

Today I will tell you about how to properly replace thermal grease on the central processor of a personal computer.

Of course, many have done this procedure more than once, but I think it would not be superfluous to share experience with the younger generation.

I stood in the service center (not DNS, but I won’t say the name either), waiting for the printer to be brought. A teenager comes in. about 17-18 years old with a system unit, carries him behind the counter and asks that he be supplied with an antivirus, they say, he himself does not know how. I felt ashamed for him, however. Okay not a big digression and actually get down to the topic!

Apply thermal paste

And so, when everything is “polished to a shine”, put the radiator aside and start applying thermal paste.

We insert the processor into the socket, carefully, there is a golden triangle on the back of the processor. it should match the one on the socket.

We take a syringe and squeeze the contents onto the processor with a neat thin layer. Then we take a piece of writing paper, or like mine, a special scraper, and gently smear it over the processor:

We return the radiator to its place

We carefully place the heatsink on the processor, trying not to fidget with it over the surface, so as not to smear the paste all over the socket. As soon as the radiator fits snugly into the socket, you can fidget a little, not much. We grasp the latch, close the key in the desired direction. Voila. the radiator is in place.

We connect the processor power, screw the case cover onto the bolts, turn on the power supply to the PSU.

What is the difference between the process of replacing thermal paste on a processor in a laptop

The main difference between laptop processors and conventional processors is that they do not have a protective metal cover. That is, the crystal itself is completely open. This does not apply to all models, but this is common. It is very easy to damage the textolite and therefore you should not scrape off the old thermal paste with hard objects, but rather use a cotton swab or bandage, as we wrote above. The same goes for the GPU in video cards: it is completely defenseless.

Is there a difference between Intel and AMD processors

In order to correctly answer the question “how to spread thermal paste on a processor”, you need to know the design features of processors from different manufacturers.

The heat spreader cover for AMD processors is designed in such a way that it is slightly higher in the middle than at the edges. At Intel, the opposite is true: the middle is slightly lower than the edges. To achieve the maximum efficiency of your cooling system, you need to take these features into account when applying the thermal interface.

What layer of thermal paste should be applied to the processor

You should understand that the principle “the more the better” does not apply here. It’s exactly the opposite. A thin, evenly distributed layer will cool your processor much better. Remember that thermal paste is only an intermediary between the stone and the heatsink. If you do not evenly apply the thermal interface, there is a high chance of small air formations appearing, which will impair heat transfer. Also keep in mind that when the heatsink is installed in place, a small amount of thermal paste under pressure may squeeze out and fill the socket with the motherboard.

Even distribution

The essence of the method is to squeeze a little thermal paste onto the processor cover and distribute it over the entire area yourself. To do this, you can use a plastic card or ruler. Some cooling manufacturers include a small spatula with the tube. There is absolutely no difference what to use: improvised means or this spatula. The main thing is to evenly distribute all the thermal grease so that there is no empty space and that the thermal interface does not get onto the motherboard. This method guarantees the presence of an interface layer in all places between the cooler base and the chip.

READ  How to Reset Settings on an Asus Laptop

Removing the old thermal paste

  • Turn off the power to the computer first. It is advisable that he did a little work before that. then the paste will be warmed up and easier to remove.
  • If you are the owner of a compact assembly, then disconnect the motherboard from the case and remove it. In tight spaces, it is very easy to damage the internals of a computer, and it is difficult to gently apply thermal paste. Owners of full-size ATX cases can skip this point, because there is enough space inside the case in standard assemblies.
  • Remove the cooling system from the processor by first disconnecting the connector from the motherboard.
  • Use the small lever near the CPU socket to loosen the connector and remove the processor itself.
  • Then take any fabric material, such as a napkin. Cotton pads or a bandage will also work. Dampen a cloth with alcohol, acetone, or thinner. Gently remove the old layer of thermal paste. Slight effort may be required if the paste is very dry.

Be sure to make sure that the solvent does not get on the components of the motherboard: this can damage the motherboard. It is not recommended to use hard objects to remove thermal paste (some people prefer to do it with a plastic card or a ruler), because in this way it is very difficult to completely clean the processor cover. And the task is to ensure that no signs of a dried thermal interface remain on the CPU. Wait for the solvent to dry completely and proceed to the next step: applying a fresh coat.

How to apply thermal grease to a computer processor

There are many ways of applying thermal paste among the people, but, as a rule, they all differ little from each other. Often these are just different variations of the method, when the distribution of thermal paste is carried out by installing a radiator. We’ll talk about this method below. We will not analyze each of all the popular options, because they practically do not differ among themselves in terms of heat removal efficiency. We will cover two main methods.

How to properly apply thermal paste to your processor?

In order for your cooling system to cope with its task 100%, you should know some of the nuances when replacing thermal paste. About these nuances in detail in the article.

Any computer owner, regardless of the type of device (laptop or desktop), will sooner or later face a high processor temperature. This is normal because thermal grease, which is designed to better dissipate heat from the CPU cover, loses its properties over time. At first glance, it seems that there is nothing complicated in such a simple procedure as replacing thermal paste. But, as practice shows, beginners can do it wrong. Today we are going to show you how to properly apply thermal grease to your processor.

If you want to watch the video right away, click HERE.

“A drop”

You need to squeeze a small drop of thermal paste right down the center of the processor lid. Then just put the cooler back in place. He will do all the work for you: namely, during pressing, he will evenly distribute the thermal interface between the base and the heat distribution cover of the stone.

Some users prefer to squeeze out not just a drop, but apply the paste with some special pattern, for example, a cross or a circle. Of course, you can experiment, but, as practice shows, the efficiency of a heat sink does not depend on the type of pattern. The disadvantage of this method is that you will not see what form the thermal paste has taken under the base of the radiator. To do this, it will be necessary to remove the cooling again, and this can worsen the thermal properties of the paste.

Here is a short video with comments from the specialists of the OGO computer equipment hypermarket. Applying thermal paste to the cooler pad is one of the possible options.

How to properly remove old thermal paste?

Regardless of the reason why you decide to change the paste on the processor, the first thing to do is turn off the computer and unplug the power cable. If there is a switch on the power supply, set it to the “off” position.

After disconnecting the cable, you can press the power button on the system unit several times, just in case. This manipulation will remove residual electricity from the capacitors.

After making sure that the computer is completely de-energized, disconnect the cooler power cord from the mother and remove the cooling.

If it seemed to you that the heatsink was stuck to the processor, then it is, there is no need to try to force them apart. Reconnect all the wires, turn on the computer for a few minutes, and then turn everything off again. This will warm the paste on the processor and make it easy to remove the heatsink.

Then remove the processor from the motherboard by lifting the locking “lever”. Now we go directly to the removal of the old paste. Some craftsmen recommend using a ruler or a plastic card to scrape off the paste, I prefer a more gentle option and wipe with a paper towel.

Moisten a cloth with alcohol and wipe the surfaces clean several times. You can also use cotton swabs or pads, and a bandage. But try to avoid leaving fibers on the motherboard components.

If you don’t have alcohol, use cologne, acetone, or as a last resort WD40. Be careful with solvents to avoid spilling them onto the motherboard or other parts of your computer. Having washed both surfaces clean with an alcohol-free napkin, insert the CPU into the socket on the motherboard, and proceed to applying the paste.

I almost forgot, the radiator and cooler will not be superfluous to clean from dust. this will save you from accidentally getting debris on fresh paste and provide better heat dissipation.

How to properly remove and apply thermal paste to the processor and graphics card?

Let’s discuss such an important aspect of PC or laptop maintenance, such as replacing thermal paste on the CPU and GPU. This information will be useful if you are going to change the CPU, heatsink, or simply notice that the computer is getting hotter. Also consider the differences between replacement on laptops.

How to properly apply thermal paste to your processor?

Moving on to the next, most controversial point. the correct application of thermal paste? I propose to consider three common ways:

  • Squeeze a drop of paste onto the processor and simply press down with a heatsink. In theory, it will be evenly distributed over the surface of the CPU under the pressure of the heat sink. In practice, you need to guess with the amount of paste to be squeezed out. It should be a thin transparent layer through which you can even distinguish the inscriptions on your pebble. The radiator mount should press it with equal force in all directions without skewing. If it rises even a little crookedly, then the paste can be squeezed out all to one side and the processor floor will be left without a thermal conductor.
  • Some thermal paste manufacturers ship a small plastic spatula with the tube. Apply one or more drops to the processor and spread gently. The advantage of this method is that you can visually control the thickness and uniformity of the coating. If you did not have such a spatula in the kit, you can use any plastic card, an old ruler, or even a finger wearing a rubber glove. The main thing is to try to make the layer as thin and even as possible. Do not use hard objects that could scratch the processor.

In the instructions for the thermal paste, it is also possible to find a recommendation to lubricate the surface of the radiator as well. Remember that too much paste creates poor conductivity and the opposite effect of overheating.

After applying thermal grease to the processor, carefully reinstall the cooler. It is very important to do this without fidgeting with the radiator until it is firmly in place. Now you can and should wiggle it slightly so that the paste fills in the irregularities and snap the mount. Do not be alarmed if the first days the processor temperature differs from the expected one, the manufacturers themselves give up to seven days of running-in, just wait a little.

Applying and replacing thermal paste in a laptop

The question of how to apply thermal paste correctly is a serious concern for many laptop users. However, many of them are afraid of this process, believing that they can damage the processor or cooler. Such fears are partially justified. incorrect application will lead to a decrease in the efficiency of the computer and even damage to the equipment. Typically, thermal grease is applied to a laptop processor in two cases:

  • when assembling the device itself (or, for example, replacing the processor);
  • in the process of preventive cleaning of the laptop.
READ  Which Laptop Is Better With SSD Or HDD

Paste application

When deciding how much thermal paste to apply to the surface of the chip, it should be depending on the quality of the material. Most inexpensive pastes have an average thermal conductivity, so a layer of about 0.5 mm is sufficient. Once applied, the processor cover may show a little through the protection. although, of course, the inscriptions should not be visible. Good thermal pastes are applied in a 1 mm layer. These include, for example, materials using gold powder. The cost of such a paste will significantly exceed the price of average materials, but it will have to be replaced less often, and the quality of protection will be higher. The process should begin by applying a drop of thermal paste to the central part of the part. After that, the material is carefully spread over the surface of the lid, choosing the layer thickness in accordance with the type of paste. If this is not enough, apply a second drop and repeat the steps. Thermal paste is allowed to be applied not only with your fingers, but also with improvised means such as a special spatula or a wooden stick. You should not do this with metal objects such as screwdrivers that can accidentally scratch the microcircuit. It is also necessary to prevent the material from flowing out of the edges of the part. in this case, the excess is carefully removed with a special solution.

Cooler cleaning

All traces of the previous paste should be removed not only when reusing the cooler, but also in the presence of a preserved factory paste, which is unlikely to be effective enough. It is not difficult to carry out the procedure, since the metal surface of the part can be easily wiped with any cleaning agents, including alcohol-containing ones. For example, vodka or a special liquid for removing the paste will do. After removing traces, the surface is wiped with a dry cloth.

The need for application

The need for thermal paste on the surface of the processor (central or graphics) is associated with the release of a significant amount of heat. During operation, it heats up a lot, so excess thermal energy needs to be removed. For this purpose, a cooler is used, which is pressed against the processor with a metal part (radiator). However, even perfectly polished surfaces touch, leaving a small space between them filled with air. To obtain a tighter fit between the cooler and the processor, and to eliminate the air gasket, a special thermal interface is used, the role of which is played by paste. It allows you to transfer heat much more efficiently and has minimal thermal resistance, stability of properties at all temperatures and an easy-to-apply consistency.

Stages of work

The process of replacing or applying thermal paste is an operation that requires strict adherence to all stages and certain rules. You should also adhere to the replacement frequency. And, if, for example, for a home computer you can change the paste no more than once every 2 years, for a laptop the period is half that. To apply thermal paste to a new cooler and processor, no preliminary steps are required, except for unpacking them from the boxes and preparing the motherboard on which they will be installed. But when replacing the thermal insulating material or when reusing components, be sure to clean their contact surfaces. If this is not done, the insulation will be ineffective and the processor will overheat.

Preparing the processor

When you remove the heatsink, there will likely be waste thermal grease on the processor. It is removed with a cloth soaked in alcohol, being careful not to get the liquid on other parts of the computer (in order to save time and ensure the safety of the processor, it is best to clean it when it is installed on the board). If the old thermal paste turns out to be dry, you should disconnect both parts very carefully, without scratching their surfaces. Scratches on the processor will lead to temperature abnormalities and may even cause damage to the processor. Sometimes, to separate the components from each other, you must completely remove both from the laptop. After separation, the hardened paste must be removed, also trying not to damage anything. To do this, you can use the following method:

  • Take a regular school eraser;
  • Rub the metal part of the processor to a shine;
  • Continue until no traces of paste remain.

The technique is lengthy, but effective. over, the processor remains intact and very clean.

Completion of work

  • connecting the cooler to the processor;
  • by snapping in special fasteners that fix the position of the components;
  • installation of the resulting structure on the board;
  • assembling the entire laptop.

If you have doubts about the correct application of the paste, you should download and install a program on your laptop that checks the temperature of the processor. If it remains normal (up to 60 degrees in a normal state, up to 90 and even 100. at a high load), then there is nothing to worry about. In case of overheating of the processor, the laptop is disassembled and the contacting surfaces of the cooler and the chipset are checked for gaps in the paste, if necessary, applying a new thermal interface.

How to apply thermal grease to a computer processor

There are many ways of applying thermal paste among the people, but, as a rule, they all differ little from each other. Often these are just different variations of the method, when the distribution of thermal paste is carried out by installing a radiator. We’ll talk about this method below. We will not analyze each of all the popular options, because they practically do not differ among themselves in terms of heat removal efficiency. We will cover two main methods.

Even distribution

The essence of the method is to squeeze a little thermal paste onto the processor cover and distribute it over the entire area yourself. To do this, you can use a plastic card or ruler. Some cooling manufacturers include a small spatula with the tube. There is absolutely no difference what to use: improvised means or this spatula. The main thing is to evenly distribute all the thermal grease so that there is no empty space and that the thermal interface does not get onto the motherboard. This method guarantees the presence of an interface layer in all places between the cooler base and the chip.

You need to squeeze a small drop of thermal paste right down the center of the processor lid. Then just put the cooler back in place. He will do all the work for you: namely, during pressing, he will evenly distribute the thermal interface between the base and the heat distribution cover of the stone.

Some users prefer to squeeze out not just a drop, but apply the paste with some special pattern, for example, a cross or a circle. Of course, you can experiment, but, as practice shows, the efficiency of a heat sink does not depend on the type of pattern. The disadvantage of this method is that you will not see what form the thermal paste has taken under the base of the radiator. To do this, it will be necessary to remove the cooling again, and this can worsen the thermal properties of the paste.

Here is a short video with comments from the specialists of the OGO computer equipment hypermarket. Applying thermal paste to the cooler pad is one of the possible options.

How to properly apply thermal paste to a laptop processor

The processor and graphics card are the most important parts of a laptop. For their stable and uninterrupted operation, a cooling system is provided.

Is it possible to do without thermal paste for a computer

It is possible, but not for long. With insufficient heat dissipation, the processor overheats, which significantly increases the likelihood of its failure. The same can happen if you overdo it with the amount of thermal paste. the heat sink in this case also deteriorates, with all the consequences. Therefore, regular timely replacement of thermal paste is a guarantee of stable, and most importantly, long-term operation of the processor. Of course, no one is safe from unpleasant surprises, but the use of high-quality pasta significantly reduces their likelihood.

And I didn’t want to talk about it, but the mischievous imp over the left shoulder suggests that the information may be useful to some readers. The guaranteed way to “kill” the processor is to remove the old thermal grease and not apply a new one.

Why is this necessary? For example, you are already tired of using that ancient monster, which at the dawn of civilization was called a computer, but the authorities (as an option, parents or wife) will not dare to upgrade again. A processor failure is a great excuse to allocate money from the budget for unplanned repairs. Is not it?

READ  How to connect a Samsung laptop to the Internet

How to apply thermal paste correctly

Preliminary actions will require the removal of the old layer of the substance. To do this, carefully remove the heatsink and cooler from the processor.

The paste can be in the form of a plastic substance, in which case we remove it with an alcohol solution, wetting a cloth in it (cotton swabs, sticks, etc.).

The material applied for a long time loses its properties and dries up, adhering to the surface. It will require painstaking cleaning.

Important! When processing, avoid damaging the computer parts, even a minor scratch can distort temperature conditions and impair the performance of the elements.

An effective but time-consuming method is a rubber eraser. It is necessary to clean the surfaces from particles to a shine. To facilitate the task, the radiator can be processed with other objects (wooden rail, etc., but without sharp objects).

Attention! When using the rubber band on the processor, the component remains in the motherboard connector to avoid damage.

Let’s move on to applying a new layer. We follow the rules:

  • The material is taken in a minimum amount (about the size of a match head), less for a video card chip (no more than 1 gram).
  • Apply evenly over the entire surface, maintaining the same thickness of the paste.
  • We process so that the material lays down as thin as possible.

Gaps are not allowed, the coverage must be continuous.

Following the recommendations will ensure maximum contact surface and a high degree of cooling.

Attention! One-time PC prophylaxis will require one thermal pad and up to 2 grams of thermal paste.

We talked in detail about the features of the heat-conducting paste, its scope and application methods.

How to choose processor thermal grease

There are several types of material used depending on the specific component of the laptop that needs to be cooled.

Liquid metal, is a liquid mass or gaskets.

Advantages: high thermal conductivity, the ability to apply at subzero temperatures.

Disadvantages: high price, aggressive components, electrical conductivity. Cannot be used on aluminum surfaces, processor covers, or other sensitive items.

Thermal spacers, a versatile material that can be used on non-demanding components.

Pros: elasticity, fills voids of any shape and size, while maintaining stable thermal conductivity.

Cons: Doesn’t provide adequate cooling for the CPU and GPU.

Hot glue, after application forms a high strength bond.

Advantages: fixes parts in places where appropriate fasteners are not provided.

Standard thermal grease, a commonly used compound with high heat transfer properties.

Advantages: the result is higher than in the use of thermal pads and hot melt glue, suitable for all surfaces.

A variety of paste, with the addition of copper and gold, will provide cooling for the most powerful processors.

Disadvantages: Minimal space required between the chip and the cooling system.

Important! The main parameter of the layer is heat conductivity, but it does not always reflect the efficiency of the application. The composition should be selected based on professional responses in reputable media, as they are formed on the basis of competently conducted tests with reliable results.

These are products of domestic production. Their characteristics: high thermal transfer, durability of the applied layer, affordable price.

These materials have shown good test results.

Reference! Pastes are available in various packages: syringes, tubes, bags. Syringes are the most convenient: they make it easy to dispense and apply material.

What layer of thermal paste should be applied to the processor

You should understand that the principle “the more the better” does not apply here. It’s exactly the opposite. A thin, evenly distributed layer will cool your processor much better. Remember that thermal paste is only an intermediary between the stone and the heatsink. If you do not evenly apply the thermal interface, there is a high chance of small air formations appearing, which will impair heat transfer. Also keep in mind that when the heatsink is installed in place, a small amount of thermal paste under pressure may squeeze out and fill the socket with the motherboard.

Stage 1: preparatory work

  • First, you need to completely disconnect the device from the power supply, additionally remove the battery from laptops.
  • Disassemble the case. There is nothing complicated at this stage, but the parsing process for each model is individual.

Cleansing the processor from the remnants of old thermal paste. To do this, you can use napkins, cotton swabs, a school eraser. To improve the effect, napkins and sticks can be dipped in alcohol. Never use your hands, nails or other sharp objects to wipe off the remaining paste.

General information

If you notice that the computer case has begun to overheat (the cooling system makes more noise than usual, the case has become hotter, the performance has dropped), then there is a need to think about changing the thermal paste.

For those who assemble a computer on their own, applying thermal paste to the processor is a must. The thing is that at first the processor “off the counter” can heat up more than usual.

However, if you bought a computer or laptop that is still under warranty, it is better to refrain from replacing the thermal paste yourself for two reasons:

  • The device is still under warranty, and any independent “intrusion” of the user into the “interior” of the device, most likely, will entail the loss of the warranty. In extreme cases, contact the service center with all complaints about the operation of the machine. Experts will find out what the problem is and fix it under the warranty.
  • If the device is still under warranty, then most likely you bought it no more than a year ago. During this time, thermal paste rarely has time to dry out and become unusable. Please note that frequent replacement of thermal paste, as well as assembly and disassembly of a computer (especially a laptop) also negatively affects its service life (in the long term).

Thermal paste should ideally be applied every 1-1.5 years. Here are some tips for choosing the right insulator:

  • It is advisable to immediately exclude the cheapest options (such as KPT-8 and the like), since their efficiency leaves much to be desired, and it is difficult to remove a layer of cheap thermal paste to replace it with a better analogue.
  • Pay attention to those options that contain compounds of particles of gold, silver, copper, zinc, and ceramics. One package of such material is expensive, but it is quite justified, tk. provides excellent thermal conductivity and increases the contact area with the cooling system (great for powerful and / or overclocked processors).
  • If you do not experience problems with severe overheating, then choose a paste from the middle price segment. This material contains silicone and / or zinc oxide.
  • What is the risk of refusal to apply thermal paste to the CPU (especially for PCs with poor cooling and / or a powerful processor):

    • Slowdown of work speed. from minor slowdowns to serious bugs.
    • Risk that a hot processor will damage the motherboard. In this case, even a complete replacement of the computer / laptop may be required.

    Learning to Apply Thermal Grease to the Processor

    Thermal paste protects the CPU cores and sometimes the graphics card from overheating. The cost price of high-quality pasta is low, and the change does not need to be done so often (depending on individual parameters). The application process is not very difficult.

    Also, it is not always necessary to replace the thermal paste. Some machines have an excellent cooling system and / or not too powerful processors, which, even if the existing layer becomes completely unusable, avoids a significant increase in temperature.

    Stage 2: application

    • First, apply one small drop of the paste to the center of the processor.
    • Now spread it evenly over the entire surface of the processor using the special brush that comes with the kit. If there is no brush, then you can use an old plastic card, an old SIM card, a nail polish brush, or put on a rubber glove on your hand and smear a drop with your finger.
  • If one drop was not enough, then drop it again and repeat the steps of the previous point.
  • If the paste gets outside the processor, carefully remove it with cotton swabs or dry wipes. It is desirable that there is no paste outside the processor. it can degrade the performance of the computer.
  • When the work is completed, after 20-30 minutes, reassemble the device to its original state. It is also recommended to check the CPU temperature.

    It is not difficult to apply thermal paste to the processor, you just need to be careful and basic safety rules when working with computer components. High-quality and correctly applied paste can last a long time.

    HSIDG.COM 2021