Laptops and Tablets • Recommendations and advice


How To Access The Asus Laptop Menu


The SIMplest BIOS setup on an Asus laptop can be done as follows. After logging into this system, go to the Exit tab. On it we find the item Load optimized defaults and press “Enter”. A request will appear, which must be answered positively. That is, click OK. After that, go to Save and exit setup and press Enter. Next, the usual restart of the laptop will begin. The performed manipulations are enough to significantly speed up the equipment testing process.

What is BIOS?

BIOS is the basic input / output system. It saves the basic settings of the computer (date, time, type of processor installed, size and model of connected drives). That is, information, without which NDT cannot function. In most cases, the default settings are sufficient: the computer boots up. And all is well. But this approach is not entirely justified. It is necessary to set optimized parameters, which allow you to reduce loading time and more efficiently use resources. Physically, it is a volatile memory chip that is installed on the motherboard. Its functioning is impossible without a battery. Once the battery is dead, it needs to be replaced on the motherboard. Otherwise, at each boot, you will have to set the desired values, which is not very convenient. The BIOS launch on an Asus laptop or any other manufacturer’s device is performed after power is applied. After that, the equipment condition is tested. Before starting to load the operating system, you can enter the basic I / O system. During its operation, this cannot be done, since some of its values ​​are used for the full functioning of the OS.

Basic login options

The easiest way to find out how to enter BIOS on an Asus (ASUS) laptop is in the user manual that comes with the mobile PC. This is indicated there. But such documentation is not always available. Then you can try to determine this during the boot process. To do this, after turning on the power, we look at the screen. If the manufacturer’s logo appears, then you need to press Esc. On the black screen, you need to find the following inscription: Enter to setup. Instead of ellipsis and the required key or their combination will be indicated. This inscription will be either at the bottom of the screen, or at the top, at the end of the text. Its location depends on the device model. As practice shows, most often this Taiwanese manufacturer uses the following options:

  • F2.
  • Ctrlf2.
  • Del.

Therefore, if it was not possible to figure out how to enter the BIOS on an Asus laptop using one of the two previously given methods, then you can try to determine this by the selection method. That is, when you first start the mobile PC, we press the first key of them and look at the result. If you get in, then we use the combination at the next boot. And finally, Applying the third option. In most cases, one of the three suggested options should definitely work.

How To Access The Asus Laptop Menu

How to enter BIOS on Windows 10 in an ASUS laptop. Articles

  • How to enter BIOS on Windows 10 in an ASUS laptop
  • How to start Windows through BIOS
  • How to open BIOS on an asus laptop


Several basic I / O options allow you to speed up the initialization process for a device such as an Asus laptop. In this case, entering the BIOS, as noted earlier, will have to be done several times. Immediately you need to establish the order of choosing a boot device. To do this, go to the Boot menu section. In it, as the First Boot, you need to install exactly that hard disk (the keys PgDn and PgUp or F5 and F6 are used, there is definitely a hint on how to perform this manipulation) on which the operating system is physically located. The same parameter is sent before installing it either on a flash drive or on a CD (depending on where this procedure will be performed from). The following boot sources (Second Boot, Third Boot) should be Disabled to avoid confusion. It is recommended to install Other Boot in the same way. Next, you need to disable the display of the logo of the manufacturer of the mobile PC. It can hide important messages in the state of the computer hardware during the testing phase. To do this, go to the Advanced section and find the Logo On item. Its also on the previously outlined technique Changing to Disabled. Then save the changes and restart the laptop. Loading the BIOS on an Asus laptop after that will be visible firsthand, and not hidden by the manufacturer’s logo.

How to enter the Boot menu. boot menu

Not everyone, even quite experienced users, is aware of the presence in their computer or laptop of the so-called boot menu, or a boot menu that can be called up when the system boots. And if you have heard about it, they do not always know what it is.

Please note that the concept of boot menu should not be confused with the OS boot manager, with which you can select the operating system you need installed in any of the logical disk partitions. Boot menu is a BIOS-built menu for selecting a boot from a physical device on which the operating system is located.

The purpose of the boot menu

Why does a user usually need a boot menu? Indeed, as a rule, most users have computers with a preinstalled operating system that ensures their performance.

However, in the course of working with a computer, the user is often faced with the need to use various options for booting the system. And the computer BIOS provides ample opportunities for this. You can boot the operating system both from a hard disk (or from several, if you have more than one hard drive installed in your system unit), and from a floppy drive, and also use a CD or DVD drive as a boot device. As a rule, there is in the boot menus and the option of booting the system through the network. In addition, due to the recent widespread adoption of USB flash drives, they have also become extremely popular as boot devices.

The reasons for using the boot menu can be varied. Suppose your operating system has crashed and you want to boot from a portable device to restore it. Or are you going to install the operating system on a clean hard drive.

How to get to the boot menu

First of all, do not forget that the order of boot devices can be set in the BIOS Setup program menu. It is worth remembering this feature also because some motherboards, especially older computers, SIMply have a boot menu. Usually, a list of boot devices can be found in the Boot section, where you can set their priority, that is, Arrange the devices in such an order that the system would one by one look for the operating system on each of them.

But suppose that for some reason you cannot go into the BIOS and install the necessary device there, or you SIMply do not want to waste time on this. Then you have the opportunity to select the boot device right at the time of computer boot.

Entering the boot menu is quite SIMple. all you have to do is press a certain key during boot, just like you do to enter BIOS Setup. Usually different manufacturers assign different keys for this. This can be the key and F8, and F11, and F12, and Esc. It all depends on the specific motherboard manufacturer as well as the BIOS. Therefore, it is best to look at the documentation for your particular motherboard or laptop. Or see the desired key during BIOS boot on the screen.

READ  Speaker Not Working On Laptop What To Do

But this method is unlikely to work in the case of a laptop, because the boot screen on a laptop flickers very quickly, and the user, as a rule, does not have time to notice what is written there. The only thing that can be advised in this case is that on laptops, as a rule, the F12 key is used. So if possible, try F12 first and then other function keys.

Also keep in mind that the boot menu is labeled differently on different systems. it can be called BBS Popup, MultiBoot Menu, Boot Agent or something else.

Below we provide a list of the main keys used to invoke the boot menu, depending on the manufacturer of the motherboard and BIOS.


  • MSI (motherboard). AMI (BIOS). F11
  • Gigabyte. Award. F12
  • BIOStar. Phoenix-Award. F9
  • Asus. AMI. F8
  • Intel. Phoenix-Award. Esc
  • Asrock. AMI. F11
  • Chaintech. missing
  • ECS. AMI. F11
  • Foxconn. Esc
  • Gigabyte. F12


  • Asus. Esc
  • Acer. F12
  • Asus AMI. Esc
  • Asus Phoenix-Award. F8
  • Dell. F12
  • Fujitsu. F12
  • HP. Esc, then F9
  • Lenovo. F12
  • MSI. F11
  • Samsung. Esc (note. press only once during the startup screen!)
  • Sony. F11
  • Toshiba. F12

So, in this article, you learned how to invoke the boot menu. a handy built-in BIOS option that helps the user choose a boot device. Of course, the boot menu cannot replace OS boot managers such as ntldr in Windows, but its advantage is that it does NOT depend on a specific operating system.

Features of entering BIOS on ASUS laptops running Windows 8 / 8.1 / 10

If your ASUS laptop is running Windows 8 / 8.1 / 10 and the above method of entering BIOS does not work, please follow the instructions below.

Important note! Images show English text. For a better understanding of the process, accompanying comments are given in Russian. The arrangement of keys and menu items remains the same.

Open settings (options).

Click on the button “Change computer settings” (Update and security in version 10 OC).

Update and Security Read also: How to fix api-ms-win-crt-runtime-l1-1-0.Dll error. Missing file

Got to the General section. Go from there to the category “Special boot parameters” (for version 10 in the “Recovery” section), then click the “Restart now” button.

Open the Diagnostics page.

In the menu that appears, click on “Advanced Options” and “UFFI Firmware Options”

After the laptop is fully rebooted, the BIOS will turn on.

Now you know how to enter the BIOS on an Asus laptop, if you did not succeed, then read the instructions carefully and describe the problem in the comments to the article!

Good day!

ASUS notebooks are among the leaders on the market today (good value for money). Well, since they are in demand, then there are always enough questions about them.

In today’s article, I want to touch on one of them. namely, entering the BIOS (or UEFI on newer device modifications). Most often, this must be done to boot from an installation flash drive (for example, to update / install Windows), to disconnect some devices, view the model of components, etc.

Approx. : The article is replete with explanatory screenshots. Some of the details that you see on the screen may differ slightly from yours, depending on the software version of your device (but all actions will be the same for laptops of this brand).

How to enter BIOS on an ASUS laptop

There are many ways to enter BIOS using different key combinations. But here you need to take into account the fact that depending on the model, modification of the laptop motherboard, the entire sequence of actions can differ significantly. In most cases, the keys are involved in loading parameters.

Let’s consider several ways, thanks to which you can enter the BIOS in an ASUS laptop as quickly as possible:

  • Including laptop. Since the parameters are loaded quite quickly, it is required to enter the BIOS in the first 3-5 seconds before the OS starts. When you see the company logo, you need to click on. Then the system offers to continue “Enter SETUP” and select the appropriate start button. In most models, the start signal is a key press. As a rule, the system itself indicates which key to select.
  • If the laptop did not react in any way, then you need to try entering the BIOS by selecting the keys. It could be a combination either. Some modified models can respond to pressing. It should be noted that it is necessary to try a new key combination during each subsequent system boot.
  • In case of a failure to load the laptop parameters, you need to give time to rest and cool down. And again try to boot, hold down the power key, and further configure the BIOS.

How to enter BIOS on ASUS laptop and disable uefi

This article will be useful to all ASUS notebook owners who, for some reason, needed to enter the BIOS. Most often, they enter the BIOS during the installation of Windows on a laptop, when you need to set the boot from a USB flash drive, or CD / DVD disc. Or it will boot from a bootable disk for Windows recovery, virus checking, or other tasks. Also in the BIOS of an ASUS laptop, you can change many different parameters, see the connected devices, or update the software.

A bit off-topic, but I’ll tell you a little secret. To boot your laptop from a USB flash drive or disk, it is not at all necessary to enter the BIOS menu and change the settings there. You can use the Boot Menu. On ASUS laptops, you can call it with the Esc key immediately after turning on the laptop. Press the power button, and immediately press Esc. A menu will open in which you can select the required device to download.

In most cases, regardless of Windows installed (if the operating system is already installed), the BIOS settings on an ASUS laptop can be opened with the F2 key. This method can be used when Windows or the system is not yet installed. Also in Windows 7. Just in Windows 8 and Windows 10 there is another way to get to this menu. Let’s take a closer look at everything. I also have an ASUS laptop (though not the newest one), so I can show everything with a real example.

Windows 10

In the latest versions it is possible to enter the settings at the beginning of the overload. You need to hold down the Shift key and select the Restart option. Or after turning on the laptop, continuously press F2.

If you have recently acquired a laptop from ASUS, then basic knowledge of English and instructions for a computer device that comes in the kit will help you answer many of your questions and help you enter the system settings. And competent work with the BIOS software will help to make the necessary changes to the system operation in a timely manner and eliminate possible problems.

Entering BIOS for ASUS laptop with Windows 10 and Windows 8

The thing is that due to the fast boot function, it is impossible to enter the BIOS after turning off the laptop. I checked. Turned off the laptop, pressed F2. I turned it on, and Windows 10 was booted. Therefore, for the F2 key to work, you must NOT turn off the laptop, namely, restart it. In the start menu, click on the “Shutdown” icon and select “Restart”.

After that press and hold, or just actively press the F2 key.

Another way is to temporarily disable the Quick Start function. Go to Control Panel All Control Panel Items Power Supply. On the left, select Power Button Actions. You need to uncheck the box “Enable fast startup” and save the settings. If this item is inactive, then there will be a link above “Changing parameters that are currently unavailable.” Click on it.

After that, you can turn off the laptop, turn it on and go into the BIOS, as I showed at the beginning of this article. When you are done, I advise you to turn on the “Quick Launch” function back.

Hope my advice helped you get into BIOS on your ASUS laptop. Everything works for me without problems. Just look carefully, do not change all the settings in the BIOS in a row. You can set it this way. # 128578; If something does not go according to plan, then you can always reset the BIOS settings to factory defaults by selecting the “Optimized Defaults” item (F9 key).

If you have any questions, ask in the comments. I will definitely answer everyone!

Every year ASUS products are in great demand among consumers. In addition to a high-quality assembly, the full operation of the computer system is ensured by its competent setting of all parameters, the initial stage of which is the correct entry into the BIOS on an ASUS laptop.

READ  How to enable huawei share on laptop

3 ways to enter BIOS / UEFI on ASUS laptops

Method 2

This method is somewhat different from the first: the fact is that we will open not one BIOS, but the boot menu: from it you can quickly select a USB flash drive or disk from which you want to boot (very convenient, and you do not need to change any BIOS settings).

Note that the boot menus also contain a link to enter the BIOS. So, if you have a problem with the F2 key, try using ESC!

  • The first step is also turning off the laptop;
  • Then hold down the ESC key;
  • Don’t let go of ESC, turn on the laptop;
  • We hold the ESC key until the boot menu appears in front of us.

Method 2. hold down the ESC key and turn on the laptop

The boot menu is a SIMple list of devices (disks, flash drives, etc. Drives) from which you can boot.

In my example below, 3 lines are presented:

  • Windows Boot Manager is a boot of the installed Windows OS;
  • Power Plus. boot from USB flash drive;
  • Enter Setup. enter BIOS / UEFI settings.

Choosing a boot option

Sign in on a specific version of Windows

In Windows 7 / XP, to determine the BIOS version, you must enter the command “MSInfo32” in the “run” line or enter it in the search for the “Start” menu. As a result, a window with complete information on the OS will open. Then it remains only to select the necessary buttons.

Login to ASUS admin panel at

  • After connecting, you need to open any browser in the address bar, write the address: Go to this address. If this is the first time this router is being configured, a page will open where the settings are displayed. Search THESE settings for the Asus quick setup wizard. Are you prompted for a password and login? Use standard ones, for example, login. admin and password. admin.
  • Of course, if you previously changed your password and username, then enter your own. If the password and login have been changed, but now you cannot remember them, then you need to reset the settings to the factory settings, as described above.

Where can I get the addresses that are written in the address bar of the browser to access the settings? It is indicated on the case of the router itself. Here:

Entering Asus router settings. 2 ways to connect

  • In the case of an existing connection of the router to the computer, you can scroll this instruction page below, since we will start with the connection process.
  • If you do not have a connection, then it must be established in one of two ways: via a network cable or Wi-Fi connection. Let’s consider both options in more detail:

Connecting to a router via Wi-Fi

If you have previously set up a connection to an Asus router, then this will not be a problem for you. In the case of a new router, immediately after turning it on, it will start looking for a wireless network, which in most cases will be called Asus.

The network will be without a password, and you just need to connect to it, click on the network and select “Connect”:

How to enter the settings of the Asus router (login to the admin panel)

In this article, we suggest that you familiarize yourself with the instructions for setting up an Asus router by logging into the admin panel of the router using the data provided for this.

Routers from the manufacturer Asus are one of the most popular and widespread in our country, especially the models: RT-AC51U, RT-AC68U, RT-N12, RT-N16, RT-N11P, RT-AC3200, RT-N14U, RT-N66U, RT.AC87U, RT-AC66U, RT-N56U, RT-N56U. The process of setting them up is not much different from setting up equipment manufactured under other brands, but there are still differences. Therefore, we decided to create a separate manual for ASUS routers.

We set up Asus equipment as standard:

  • We connect to the router using a network cable or via a Wi-Fi network.
  • Using any browser, go to the control panel.

Please note that you can enter the settings and change them not only from a stationary PC, but also from any mobile device: tablet, smartphone. However, it is more convenient to do this using a stationary PC or laptop. In this case, it is better that the device is connected via a cable, but if you use a wireless connection, then please note that the firmware of the router does not need to be carried out using wi-fi, because. likely to receive non-working equipment instead of a working device.

Connecting to a router via a network cable (network).

  • Everything is very SIMple here: we take the cable that comes with the router and connect it to the device Using the LAN connector. The connectors are signed and therefore the error here is minimal, since you can choose any of the four (see the picture below). The other end of the cable is inserted into the connector of the system unit or laptop. This is how it should look like:
  • Now you need to connect power to the router. Should I disconnect the WAN cable that is connected to the device? You don’t have to do this, this cable does NOT allow you to make the correct settings.

How to enter ASUS router settings if you forgot your Wi-Fi password?

If you do not remember the password for the Wi-Fi and there is no way to find it out using the second connected devices, then you will have to use a wired connection. If there is a cable, then you can do this: reset all the settings of the router to factory settings and reinstall the settings. To reset the ASUS device to factory settings, press and hold the RESET button for 10 seconds.

Not going into router settings? What to do?

The answer to this question depends on what kind of error and at what stage of the process you get. Some users face problems when connecting to a router, many do not open settings in one browser or another and a “page is not available” message appears. These are the most common problems and you can try the following to fix them:

  • Check IP acquisition settings if using LAN or Wi-Fi.
  • Check the IP network settings for the automatic receipt of the address, and the problem persists, then try using a network cable.
  • If initially the connection was carried out by means of a cable, then it is necessary to check the correctness of its connection.
  • Make sure the router is plugged in (the red light should be blinking).
  • Try to enter the settings from another device using a cable and wi-fi.
  • Reset your router to factory defaults and try the connection procedure again.


I chose the largest distribution. But the speed did NOT rise more than 200 kb / s

What is a router

Since some novice users do not quite understand what a router is, we will try to explain the difference between various home communication devices for accessing the Internet. The first group of devices is USB 3G modems, which are mainly sold to mobile operators Yota, MTS, Beeline, Megafon and Skylink, and allow you to access the Internet using 3G wireless technology. These modems have an internal interface with settings, but there is only an external software shell, which is installed as a normal program. Therefore, it is quite easy to enter the settings of such a modem. This is how such 3G modems look like:

The next category of home digital devices that allow you to access the Internet are ADSL modems and access points, which are very SIMilar to routers, but work using a different ADSL technology, allowing you to connect via a telephone line, and not occupy it. Such modems usually have their own internal interface. Often providers (for example MGTS) Provide such modems for rent and block access to the settings or SIMply don’t say how to get into the settings. This is what the rear panel of the ADSL modem looks like:

The last group of devices, which is probably the most common in home Internet users, is ordinary routers, or as they are called in narrower circles, routers. Routers have much more settings than the above mentioned 3G and ADSL modems. Currently, the most common routers are with Wi-Fi technology, which allows you to connect devices to Wi-Fi with modules without wires. There is also a pitfall here. if a provider (for example, Beeline or Rostelecom) installed and configured the router for you, then entering the router’s menu may be problematic. Such routers are also called Wi-Fi access points:


If you are NOT mistaken and the speed is 200 kilobytes, then there are clearly some problems with data transfer.
If there is a router in the apartment. Turn it off from the power supply for 10 minutes, then turn it on and check.
If the speed has NOT increased, connect the ISP cable directly to the PC, set up the connection and check the speed.
Try to reinstall the uTorrent program, and download some movie from the resource rutor.Org

READ  How to Change Laptop Hard Drive

If you can’t enter the router settings

It may happen that your router does NOT distribute the IP address automatically and you will NOT be able to enter the router menu immediately. We’ll have to establish a connection with him manually. What to do if you do not know the address of the router, and in the browser, when you enter or, the message “Cannot display the page” appears? First, we find out the IP addresses of the router. menu item “Status”:

As you can see in the picture, you need to find the term “Default gateway IP”, the value of which will be the address of the router. After that, you need to go back to the properties of the network connection and the properties of the TCP / IPv4 protocol, as we described above, and set the following values ​​(for the router address

  • IP address. (or any other IP up to
  • Mask.
  • Gateway.
  • Preferred DNS Server.

For a router with the address, the settings will be as follows:

  • IP address. (or any other IP up to
  • Mask.
  • Gateway.
  • Preferred DNS Server.

Finally, a few popular questions on the topic, how to enter the router settings:

  • Question: Tell me how to log into an Asus router? Answer: The IP address of most ASUS routers is However, my addresses
  • Question: Tell me how to enter the tp link router? Answer: The IP address of most TP-Link routers is
  • Question: Tell me how to access the d link router? Answer: The IP address of most D-Link routers is, on older models it used

Of course, the easiest way is not to guess, but to find out the address and log into the router using the methods that we described in this article. We hope it came in handy. If you have any difficulties, ask questions in the comments, indicated the model of the router.


The processor temperature from this should not be so high. The channel can only be changed on your router, in the wireless network settings section.

You may also be interested in:

  • Setting up a router
  • How to connect a Wi-Fi router
  • How to enter BIOS
  • How to log in as administrator


We DO NOT give advice on how to hack other people’s networks. You can get this information yourself, through the search engine

How to enter the router settings

Hello dear visitors of smartronix.Ru! Many owners of home wireless and wired routers do not know how to enter the router settings. In our article, we will consider all the features of logging into the router and tell you how to log into the router yourself, on your own. It is worth noting that there is nothing complicated about entering the router and any unprepared user can deal with this procedure.

Today there are a lot of router manufacturers: ASUS (ASUS), D-link (Dlink), Huawei, Linksys, MikroTik, NETGEAR, TP-LINK, TRENDnet, Ubiquiti, Upvel, ZyXEL and others. But in fact, everything is SIMple and you most likely could do without our instructions, because the answer to the question of how to enter the settings of the router is described in the manual, which can always be downloaded from the manufacturer’s website specifically for your router model. It is enough to know the model and set the correct query in the search engine. But there are some features that novice computer users and just people who are not particularly versed in settings do not pay attention to. Or they do not know what to choose this attention for. So, let’s figure out how to enter the router quickly and independently.

Comments (8)

How to enter Boot Menu on Windows 8 and 10 systems

If you have a laptop and Windows 7 is installed on it, then getting into the Boot Menu will not be difficult at all. As I said already, this can be done with the Esc, F11 or F12 keys. However, if you have Windows 8, 8.1 or 10 installed, then getting to the boot menu in a quick way is not always possible. This is because, starting with Windows 8, shutdown or restart is NOT complete. Such a shutdown is more like hibernation, therefore, pressing the hot keys responsible for calling the boot menu may be ineffective. To turn off the computer completely in new operating systems, you can use one of the following methods:
1. When you turn off your computer, press the Shift key.
2. You can disable fast startup in the “eighth” system as follows: go to the Control Panel,

We select the section “Power supply”,

In the left part of the window, click on the item “Action of the power buttons”.

We find the item “Enable Fast Startup” and deactivate it. By the way, the same actions can be done on mobile PCs (laptops, netbooks).

How to enter Boot Menu on Lenovo laptop

To get to the boot menu for devices on Lenovo laptops, you need to press the F12 button. Also, on many computers from this manufacturer, you can find a service button with an arrow, as shown in the image below.

How to get to the Boot Menu on computers and laptops. Detailed guide

Sometimes there is a need to call the boot menu when starting the computer. the boot menu. This is necessary in cases where you need to boot the PC from any media (CD, flash drive, internal or external hard drive, etc.), for example, to install or reinstall the operating system. In this manual, you will learn how to enter the Boot Menu from a desktop computer or laptop.

I want to note right away that in old computers with antediluvian motherboards, the Boot Menu is not provided. In this case, in order to boot from any other device, you need to go into the computer’s BIOS (usually the Del or F2 key is responsible for this, rarely F1) and set the desired boot order of devices in the Boot section.

On different motherboards, this is done in different ways, however, the name of such a section will necessarily contain the word Boot.

To call the boot menu, you must also press a special key on the keyboard almost immediately after switching on. Usually these are Esc or F11, F12 keys. But there are exceptions depending on the manufacturer of the motherboard of a personal stationary computer or laptop. When you turn on the PC, on the screen below you can see which key is responsible for calling the BIOS, Boot Menu, etc.

How to get to the boot menu on an Acer laptop

If you own a laptop from Acer, then use the F12 key to bring up the Boot Menu. However, there is one thing: on many laptops, the ability to call the boot menu in the BIOS settings is disabled. This can be fixed: when turning on the laptop, press the F2 key in order to get into the BIOS. Let’s go to the Main section and activate the item “F12 Boot Menu” (must be in Enabled mode).

Then save the settings by pressing the F10 key and confirm. Now when you turn on the Acer laptop, press the F12 key and see the boot menu.

How to enter the Boot Menu on an Asus laptop

It just so happened that on older models, the F8 function key is used to call the boot menu. As for the new laptop models from Asus, you need to press the Esc key to call the Boot Menu. If you do not know an old laptop or a new one, then try at startup, first, press F8, and then, if it does not work, when you turn it on again, press Esc.

If you need to enter BIOS on Asus laptops press Del or F9.

If you are the owner of a laptop of a second manufacturer, then see the table below, where popular laptop companies with both Boot Menu and BIOS call buttons are listed.

I think that now, after reading this manual, you can easily get into the boot menu on any stationary computer or laptop of any manufacturer. That’s all, thanks for your attention.