Laptops and Tablets • Recommendations and advice

Tablets

DIY stylus for graphics tablet

Let’s sum up

So, today we learned how to make a stylus for a tablet with our own hands, as well as some improvised tools that can be used instead of a stylus. We hope that everything worked out for you, and you found the very structure that you could build yourself. Tell us in the comments what you have chosen as a new device for entering information on your gadget?

wikiHow works like a wiki, which means that many of our articles are written by multiple authors. To create this article, 47 people, some anonymous, worked to edit and improve it over time.

The number of sources used in this article: 14. You will find a list of them at the bottom of the page.

Lost your stylus? Do you want to draw comfortably on a tablet, don’t always use the screen with gloves? Don’t rush to spend money on a new stylus that you can make with your own hands from ordinary household items.

How to make an electronic pen (stylus) and a mini tablet with your own hands?

How to make a mini tablet and a stylus for a laptop out of all the trash.

That is, we are talking about an electronic pen with which you can write handwritten texts or draw.

How to make a stylus for a laptop

Friends, before you learn how to make a stylus for a tablet with your own hands, let’s first analyze the principle of operation of this device. It is possible that during the study you will come up with your own ideas for the production of the product, which will differ from those presented below. So, let’s figure out how this wonderful gadget works.

Learn how to make a stylus for a tablet with your own hands effortlessly and efficiently

Modern touch screens are of the capacitive type. This means that it will respond to finger touch. Previously, touch devices had resistive displays that made it difficult to recognize fingers, and they worked with a stylus or long nails. It is worth noting that despite the ease of use of the stylus, they were constantly at risk of being lost. If you have ever had a smartphone or tablet with a stylus included, then you can remember how much you worried that you would lose this accessory.

  • 1 stylus or finger?
  • 2 How to do?
  • 2.1 The most popular “home” styluses
  • 2.1.1 From a cotton swab
  • 2.1.2 From a metal tube
  • 2.1.3 From a ballpoint pen
  • 2.1.4 From fluoroplastic
  • 3 Summing up
  • How it works?

    So, the nib had to be slightly modernized by adding a stylus pressure sensor to it. In the drawing, the final version of the nib.

    • Tube (cambric).
    • Tailor’s pin.
    • Silicone part of the assembly from the keyboard.
    • Brass plate.
    • Double sided tape.
    • PTFE film.

    This drawing is to explain how the electronic pen nibbler works.

    One element of the nib is a silicone pimple, which is used in computer keyboards, remote controls, etc. This assembly unit required minimal rework. I just removed from its inner surface the contact pad made of harder rubber.

    This dome-shaped rubber band holds the brass plate and allows you to tilt the pen while keeping the plate horizontal relative to the touchpad surface.

    An ordinary tailor pin passes through the middle of this elastic band, which, together with the brass plate, is a contact pair. The latter, when you click on the writing node, closes the left mouse button.

    stylus, graphics, tablet

    To ensure good glide of the pen on the surface of the touch panel, a fluoroplastic (Teflon) film is glued to the brass plate using double-sided tape.

    The most interesting videos on YouTube

    It all started with a discussion on the digitization of handwritten formulas. During the discussion, I got the idea of ​​a very simple design of an electronic pen, which could be used to write on the surface of the touchpad (Touch Pad) of any laptop. I was so interested in this idea that I decided to make such a feather, although there was no particular need for it. Apparently, the fact is that my next project stalled, and a little respite was needed.

    To understand why the touchpad cannot be used with any object, such as a pencil, you need to figure out how it works.

    The touchpad is a touch panel that works on a capacitive principle. Capacitive sensors are located inside the panel, which react to a change in capacitance introduced by a finger of a person’s hand. To reduce recognition errors of this very finger, the touch panel also reacts to the capacity of the human body, which it registers through the finger touching the panel.

    In general, the task was to fool the touchpad and slip it with a regular plastic handle instead of a finger. As it turned out, this is easy to do. It is enough to choose a metal washer of a suitable size and attach a small piece of wire to it. The wire can be passed into any hollow tube, for example, a body from a felt-tip pen or a ballpoint pen.

    The initial project was very simple. I installed the button inside the body from the felt-tip pen and propped it up from the inside with a piece of thick cardboard so that the cardboard was firmly stuck between the button and the body.

    I assumed that it would be possible to write characters by pressing this button each time. But, even after the first test of the pen, it became clear that writing and pressing this button at the beginning of each element of the letter is extremely inconvenient. After all, we are already used to the fact that the line begins when the pen is pressed against the paper or tablet.

    The most popular home styluses

    The easiest option is to take a cotton swab and wrap it in foil. Swipe the screen and check its action. Be sure to touch the foil with your fingers.

    A cotton swab and foil are all you need for a tablet pen
    From a metal tube

    Take a metal tube, for example, an antenna from an unnecessary radio is suitable, stick an antistatic sponge into it, which can be purchased at any radio market. Cut this sponge to give it a nice and pleasing shape. But watch out that it is not very thin, as the screen may not react.

    With your own hands, you can create a wonderful tablet drawing tool that glides well and softly on the screen, evokes responses and does not leave any traces behind.
    From a ballpoint pen

    If you want the lines to be thin when drawing, you have to sweat a little. Take a regular ballpoint pen and wrap the nib in some soft material. You can curl the paper tightly, around which there will be an antistatic film, so that there is sufficient contact area. Now wrap the foil around the pen so that it touches the foil on one end and your fingers on the other. You can start drawing! Please note that the rod must be removed from the handle.

    The most basic rule, without which the stylus will not work, is the use of conductive materials.
    From fluoroplastic

    It turns out this is such a pleasant and necessary thing that is always at hand

    You can place this prepared piece of Teflon in a pen if you want your stylus to look more elegant. Or you can make a full-fledged rod from fluoroplastic-4 and wrap it with any material you want: metal, plastic, wood, and so on.

    READ  How to Clear History on Tablet

    PTFE glides perfectly and does not scratch the screen

    How to make?

    What can you use instead of a tablet stylus? This question arises for many people who are impatient, for example, to draw a beautiful drawing on their device. Let’s then try to make a stylus with our own hands! This is not very difficult, because there are so many ideas and methods for this. Please note that some materials may scratch the display, so check only on a screen with a film. So, let’s take a look at the most popular “home” styluses.

    Stylus or finger?

    Note also that any kind of stick-like input could have been used for resistive screens. With capacitive displays, this trick will not work. This is due to their design. We will not go into details, but just say that a conductor of electric current is needed to work on a capacitive display. Since the human body is an excellent conductor, our fingers do an excellent job of entering data on the touch screen.

    When Apple introduced the iPhone, in which the touch screen worked and responded to human fingers (capacitive display), then people began to think about, but do you need to buy a stylus if it is not always with you? However, for some tasks, the convenience of using your finger on the touchscreen is at risk, for example, if you draw on a tablet, it is very difficult to draw thin lines when you are using it with your hands. This situation is familiar to very many artists or just lovers of drawing, when a dense forest appears instead of an elegant eyebrow.

    Stylus lines are thin and graceful, so you can draw whenever you want

    It turns out that there are still times when the thought is spinning in your head: “If only the stylus is right now!” But modern tablets and smartphones are practically not supplied with such devices in the kit. And then there is a need to additionally purchase this miracle of technology. What then is the decision of Apple, which releases the iPad Pro and shows its work with a special stylus Apple Pencil, which must be purchased separately. Naturally, this is a disregard for the corporation’s attitude towards its customers, who clearly do not want to pay more than nine thousand rubles for a wand, which could be added to the set of such an expensive tablet. Therefore, let’s find out how to make a stylus for a tablet with your own hands.?

    Construction and details

    The diameter of the brass plate should mimic the contact surface of the finger. Testing has shown that laptop touchpads work stably with a plate diameter of about 10mm.

    I connected the brass plate to the feather using a piece of MGTF wire, which I twisted into a spiral. I glued a fluoroplastic film to the plate using double-sided tape. Just the day before, I used this technology to restore the sliding of a computer mouse.

    The second wire was soldered to the pin using active flux. The pin was fixed in the writing unit of the felt-tip pen with the help of two PVC tubes put on the pin, which were previously the insulation of wires of different diameters.

    The connecting cable, made of flexible wire, fixed in the cork of the felt-tip pen.

    I glued the brass plate with the silicone pimple using silicone sealant. For this, I built such a simple press.

    Well, I don’t know how this gum is correctly called.

    In order to connect the pen pressure sensor to the computer, I used a 3.5mm jack plug. I installed the corresponding socket in the mouse, even when I was setting up this homemade product. The socket is connected to the pins of the left mouse button.

    Features of a hand-made stylus

    A hand-made stylus is often much more convenient for those who like to draw on a tablet computer. Thanks to this accessory, you can use different techniques, apply shaded lines, work with colors. In addition, the stylus can facilitate handwriting input, thereby speeding up your mobile experience. For this reason, users are looking for the best way to make a stylus from scrap materials with their own hands.

    Depending on what goals you are pursuing, you can make the tip of the accessory softer or more rigid. The soft tip accessory is most convenient for drawing. It is important to choose the right materials that will be convenient for making the tool, will not scratch the tablet screen during use and will conduct electric current well.

    Of course, metals should be classified as conductors of electricity in the first place. But they have a big drawback. they can seriously damage the screen of a mobile device. The best materials for conducting electricity will be various films that contain aluminum in their composition. These include aluminum tape, snack packaging and a variety of self-adhesive films with a silver surface.

    Before you start making your tablet accessory, check how well the base material conducts current. To do this, just touch them on the screen. If the device reacted, then the material is suitable for creating a stylus with your own hands. It is very important that the accessory fits comfortably in the hand. We recommend choosing a convenient housing that can be made from a pen, antenna, or other similar object.

    How to make a stylus for a tablet with your own hands?

    DIY stylus for complex work on the tablet

    The easy way to create a tablet accessory

    One of the easiest ways to make a stylus for a capacitive screen is to use the following materials:

    • Part of the antenna is about 15 centimeters long;
    • Cotton pad;
    • Transparent tape;
    • Self-adhesive film on an aluminum base (or aluminum tape).

    First, you need to take a cotton pad and cut it in two. The disc should then be placed inside the antenna as deep as possible. The use of soft cotton fiber will ensure comfortable work. The stylus will not make loud sounds when you touch the screen. This method will increase the sensitivity of the drawing accessory and protect the screen from mechanical damage.

    After placing the cotton pad in the antenna cavity, cut off the excess cotton with scissors, leaving the tip about 5-7 millimeters long. Next, with transparent tape, you need to create a protective shell for the cotton tip. The tape will provide extra hold. It is necessary to completely glue the cotton tip with gentle movements.

    After that, you can start attaching an electric current conductor, which will serve as an aluminum tape or film. To do this, you need to take a self-adhesive aluminum tape, stick it on one side of the stylus, then throw it over the tip and fix it on the opposite side. It is very important that the material that serves as a conductor comes into contact not only with the tape, but also with the surface of the antenna. Otherwise, the accessory will not function.

    After you have attached the conductor, you should remove the air from the part of the film that remains on the tip. This can be done with a credit card. At the same time, both ends will stick well to the cotton tip and to each other. At the final stage, it is necessary to cut off the excess film, leaving a small soft tip up to 1 centimeter long.

    Instead of the antenna, you can use the body from the handle. But it should be understood that plastic materials do not conduct electricity. For this reason, please note that you will have to glue the body of the handle with aluminum foil. The main condition that must be met is the contact of your hand with the material that conducts the current. In this case, a continuous electrical circuit must be maintained between the body, tip and screen of the mobile device.

    The most popular home styluses

    The easiest option is to take a cotton swab and wrap it in foil. Swipe the screen and check its action. Be sure to touch the foil with your fingers.

    READ  How to connect a 4g modem to a tablet

    A cotton swab and foil are all you need for a tablet pen
    From a metal tube

    Take a metal tube, for example, an antenna from an unnecessary radio is suitable, stick an antistatic sponge into it, which can be purchased at any radio market. Cut this sponge to give it a nice and pleasing shape. But watch out that it is not very thin, as the screen may not react.

    With your own hands, you can create a wonderful tablet drawing tool that glides well and softly on the screen, evokes responses and does not leave any traces behind.
    From a ballpoint pen

    If you want the lines to be thin when drawing, you have to sweat a little. Take a regular ballpoint pen and wrap the nib in some soft material. You can curl the paper tightly, around which there will be an antistatic film, so that there is sufficient contact area. Now wrap the foil around the pen so that it touches the foil on one end and your fingers on the other. You can start drawing! Please note that the rod must be removed from the handle.

    The most basic rule, without which the stylus will not work, is the use of conductive materials.
    From fluoroplastic

    It turns out this is such a pleasant and necessary thing that is always at hand

    You can place this prepared piece of Teflon in a pen if you want your stylus to look more elegant. Or you can make a full-fledged rod from fluoroplastic-4 and wrap it with any material you want: metal, plastic, wood, and so on.

    PTFE glides perfectly and does not scratch the screen

    Crazy pens: how to make a stylus for a tablet

    Friends, before you learn how to make a stylus for a tablet with your own hands, let’s first analyze the principle of operation of this device. It is possible that during the study you will come up with your own ideas for the production of the product, which will differ from those presented below. So, let’s figure out how this wonderful gadget works.

    Learn how to make a stylus for a tablet with your own hands effortlessly and efficiently

    Modern touch screens are of the capacitive type. This means that it will respond to finger touch. Previously, touch devices had resistive displays that made it difficult to recognize fingers, and they worked with a stylus or long nails. It is worth noting that despite the ease of use of the stylus, they were constantly at risk of being lost. If you have ever had a smartphone or tablet with a stylus included, then you can remember how much you worried that you would lose this accessory.

    Stylus or finger?

    Note also that any kind of stick-like input could have been used for resistive screens. With capacitive displays, this trick will not work. This is due to their design. We will not go into details, but just say that a conductor of electric current is needed to work on a capacitive display. Since the human body is an excellent conductor, our fingers do an excellent job of entering data on the touch screen.

    When Apple introduced the iPhone, in which the touch screen worked and responded to human fingers (capacitive display), then people began to think about, but do you need to buy a stylus if it is not always with you? However, for some tasks, the convenience of using your finger on the touchscreen is at risk, for example, if you draw on a tablet, it is very difficult to draw thin lines when you are using it with your hands. This situation is familiar to very many artists or just lovers of drawing, when a dense forest appears instead of an elegant eyebrow.

    Stylus lines are thin and graceful, so you can draw whenever you want

    It turns out that there are still times when the thought is spinning in your head: “If only the stylus is right now!” But modern tablets and smartphones are practically not supplied with such devices in the kit. And then there is a need to additionally purchase this miracle of technology. What then is the decision of Apple, which releases the iPad Pro and shows its work with a special stylus Apple Pencil, which must be purchased separately. Naturally, this is a disregard for the corporation’s attitude towards its customers, who clearly do not want to pay more than nine thousand rubles for a wand, which could be added to the set of such an expensive tablet. Therefore, let’s find out how to make a stylus for a tablet with your own hands.?

    How to make?

    What can you use instead of a tablet stylus? This question arises for many people who are impatient, for example, to draw a beautiful drawing on their device. Let’s then try to make a stylus with our own hands! This is not very difficult, because there are so many ideas and methods for this. Please note that some materials may scratch the display, so check only on a screen with a film. So, let’s take a look at the most popular “home” styluses.

    Let’s sum up

    So, today we learned how to make a stylus for a tablet with our own hands, as well as some improvised tools that can be used instead of a stylus. We hope that everything worked out for you, and you found the very structure that you could build yourself. Tell us in the comments what you have chosen as a new device for entering information on your gadget?

    How to choose a stylus for your tablet?

    Are you a happy owner of a tablet and want to choose a convenient stylus? This is a laudable desire, because a properly selected device can greatly facilitate the work with the device. So how to make a choice?

    You should know some facts about the operation of this small accessory. For example, styluses can vary in pressure. Rather, by sensitivity to this very force. In addition, styluses vary in weight, which can also play a significant role in its handling. You should choose one that is comfortable for you to hold in your hand! Note also the tip: size and shape can have an impact on performance. If the owner of the device does not want to use the virtual keyboard, then you should choose a stylus for the tablet that is able to work as quickly as possible, and the accuracy of which is very high.

    Why “stylus”?

    In general, where did this word come from. “stylus”? It has Greek roots and originally meant a small stick that has a pointed end. It is these small “sticks” that today help users of high-tech devices to manage. In addition, with their help it is very convenient to draw drawings on a graphics tablet.

    Curiously, some time ago, experts predicted the end of the era of stylus. However, one can observe a picture where the presence of a stylus is still required in the work of the latest devices. This is especially true of high-tech brainchilds of Samsung: stylus for Samsung tablets are in demand.

    With the history sorted out. Let’s continue. It was noticed that a large number of users complain about fragility: they say, the stylus for the tablet quickly deteriorates. It is also noted that they are simply easy to lose. Special programs came to the rescue: some of them notify the owner that the stylus is at a remote distance from the device, such as a tablet.

    For graphics

    The Bamboo stylus is a good choice for drawing graphics. This pen tablet stylus allows you to sketch lightly and has a proven track record. Yes, it is not without its drawbacks: for example, its tip is made of rubber. This means that you have to push harder on the screen, and the tip itself tends to slide over the surface at times.

    If there are no budget constraints, then you can choose the Pogo Connect model, which has as many as 4 tips in its arsenal. It was noticed, however, that with new devices Apple does not work very correctly.

    How to make a DIY Touch Pen in 2 Minutes. AWESOME

    A stylus for a tablet: how necessary an accessory?

    A large number of users of modern high-tech devices decide to abandon the keyboard and mouse. Such trends have given rise to the emergence of touch screens that are able to respond to finger touch, or a special convenient accessory called a stylus. A stylus for a tablet is a kind of thin pen that allows you to control a device equipped with a touch interface. This includes tablets as well as tablet computers. The stylus can be observed in the hand of a user of a PDA, smartphones.

    READ  How to turn on the Internet on a Samsung tablet

    DIY stylus for tablet

    Among the users of high-tech devices, there will certainly be those who like to craft with their own hands. It is to these people that the next part of the article is devoted. how to make a stylus for a tablet with your own hands.

    However, this shape is not well suited for a capacitive screen. Users concluded that such a screen is focused on contact with an object that has a larger contact area than a pencil shaft. How could this problem be solved?

    A way out was found: the annular shape is well perceived by the sensor. In addition, you can easily view the center, see where you point the stylus.

    Summing up all the conclusions, you can make such a stylus: take an aluminum rod (conductor), a steel washer and a skein of thread.

    The pen must be soldered to the washer at an angle convenient for the future stylus. You ask: “Why did you need a skein of thread?” In order not to scratch the screen. As noted, the annular edge allows you to aim through the center. And wind the threads on it. no problem.

    Someone may argue, they say, the threads worsen the level of sensitivity. In practice, everything works out very well, because the sensor does not need absolute contact with the object to determine the touch. It was noticed that even by pressing with a finger, it was possible not to touch the screen closely.

    Do-it-yourself capacitive stylus assembly

    • ballpoint pen;
    • aluminum foil;
    • cotton swab;
    • scotch tape;
    • scissors.

    The assembly of a capacitive stylus looks like this:

    • Remove the refill from the ballpoint pen.
    • Cut off half of the cotton swab at a sharp angle. Insert it into the place of the rod in the handle with the cotton head outward.
    • Fix the cotton swab in the handle with tape.
    • Take a piece of foil and wrap it tightly around the handle, stepping back 1 cm from the cotton head.
    • Secure the foil wrapper with a piece of tape. DIY stylus is ready!

    To use this device, you need to have a glass of water on hand. for optimal performance, the fleece will have to be moistened from time to time. The capacitive screen does not deteriorate from the moisture of the stylus. Also remember to keep your fingers on the foil at all times. this is necessary in order for static electricity to act on the display.

    Resistive, capacitive and heat shield

    If you are eager to make your own stylus, then first of all find out the type of touch screen of your device. this will directly affect the materials for your craft:

    • Resistive screen. This type reacts to absolutely any touch. finger, sushi stick, pencil, etc. Choose what you like best and your stylus is ready!
    • Capacitive screen. This touchscreen only reacts to the touch of conductive objects. Man, too, to some extent relates to them. our fingers, like ourselves, conduct electricity. This quality is possessed by all organic substances and creatures, as well as most metals.
    • Heat shield. As the name implies, the display will only respond to the touch of an object that emits heat. That is why it is difficult for us to work with such screens in the conditions of Russian frosts.

    Additional ways

    You can make a stylus for a capacitive screen with your own hands in a slightly different way. For instance:

    • Take an aluminum tube, attach a piece of anti-static sponge to one of its ends, which can be found in chip boxes.
    • You can build a stylus with your own hands from the same pen without a rod, replacing the cotton wool with paper, and foil. for metal packaging made of chocolate, coffee, tea, etc.
    • Some users prefer to use a thin battery as a stylus, bringing its negative pole to the screen.
    • You can use one anti-static film rolled into a tube, securing its shape with pieces of scotch tape.
    • Lightweight, non-scratching aluminum stick. also a good stylus. Only its head should not be too small, otherwise the screen simply will not “see” this object.

    DIY stylus for thermal and capacitive screen

    The market of modern gadgets decided to remind us again of the already forgotten stylus. Branded “sticks” were recently presented by Apple; Samsung is releasing a line of S Pen styluses for its Galaxy Note product. Such a device is also convenient for those who like to draw on the screen of their smartphone or tablet. It is quite possible to make a stylus with your own hands quickly and without the use of expensive materials.

    DIY thermal stylus assembly

    • feather pen;
    • gel pen with rubber band for fingers;
    • a piece of foil;
    • a piece of a dish sponge or washcloth;
    • a piece of cellophane.
    • Leave the body only from the helium pen, and from the pen. gum.
    • Dampen the sponge with water.
    • To avoid streaking on the screen, wrap the sponge in cellophane.
    • Now insert the cellophane-covered sponge into the handle. You can push it with the same helium rod, slowly. so as not to harm the bundle. As a result, only a sponge ball wrapped in a bag should be visible from the handle.
    • Remove the finger elastic from the handle.
    • Having folded a sheet of foil twice, twist a thin flagellum out of it.
    • Place this foil rod so that one end touches the sponge and the other wraps around the body of the pen.
    • Make several turns of the flagellum, put the elastic in place. The part of the foil that will stick out above the elastic can be cut off. Stylus made!

    As you can see, make a stylus with your own hands. a pretty “cheap and angry” easy way, either for a thermal or for a capacitive screen. For a resistive display, any convenient handy item can be used as a stylus.

    DIY stylus

    Hello to all homemade products. Today I will show and tell you how I made a stylus for a smartphone. This homemade product will be useful for artists, designers, etc. If there is no factory option, this DIY will be a great solution. There are many such homemade products on the Internet, but they are not completed yet. Some use wet cotton wool, others use foil, etc., but they have the same principle of operation. You need to use a conductor that is in contact with your hand. The body’s electricity is transmitted through the conductor and the conductor, in contact with the screen, produces pressing, movement, etc. But they work weakly or work every other time on a smartphone. And on the tablet in general, zero reaction.

    To make this homemade product, we need

    stylus, graphics, tablet

    Foil
    2. Handle
    3. Lighter with a flashlight. Namely, you need batteries, but you can use AA batteries.
    4. Scotch tape, electrical tape

    We connect foil and batteries

    Unscrew the screw and carefully remove the batteries from the lighter body. Now we cut the foil into two parts and fold both parts into a thin strip. We glue one strip with tape to the minus of the battery. We wrap another strip around the contact and insert the contact to the plus. We wrap batteries and strips with tape.

    We insert everything into the handle body. We wrap a little cotton on a cotton swab. Then we wrap the foil on it. We connect the strips with foil and insert the cotton swab into the body and fix it with a piece of tape.

    HSIDG.COM 2021