Connecting iPhone to Computer via USB

How to connect iPhone to computer via Wi-Fi

For the convenience of connecting iPhone to a computer, you can use the Wi-Fi function, which is distributed by the router. This feature became available in October 2011. Prior to this, synchronization took place only using a USB cable. An important mandatory point is the connection of both the iPhone and the computer to the same Wi-Fi point. Otherwise, synchronization will not occur.

You can see if there is a connection to the router of interest on your computer through Control Panel → Network and Internet → Network and Sharing Center. An active internet connection will be displayed in the corresponding section.

In order to set up synchronization between iPhone and computer via Wi-Fi, you need to connect from these devices to one Wi-Fi point.

Then connect the iPhone to the computer using a USB cable (it is useful only for the initial setup).

Open iTunes and go to the main overview page by clicking on the button at the top of the page.

Here you will see information about your iPhone, you will be able to create a backup copy to iCloud or to your computer, as well as configure the connection settings.

To work with an iPhone over Wi-Fi, find the Sync with this iPhone over Wi-Fi option and check the box and click Apply.

After setting up the functionality, the iPhone will automatically connect to iTunes and the use of a USB cable is no longer needed, but only in the case of using the same Wi-Fi network. This should also not be forgotten.

How to connect iPhone to computer via USB cable

A proprietary USB cable that comes with an iPhone of any model is used both for charging the iPhone and for pairing it with external devices.

To connect your iPhone to your computer, take a USB cable, and connect one end to your smartphone to the Lightning connector, and the other to the USB output on your computer.

If iTunes is not installed on the computer, then the offer to open the device will automatically be displayed, if the device autorun is enabled on the computer.

At the same time, a proposal will appear on the iPhone itself to allow or deny access to the files of the smartphone, but for this it is necessary to unlock the phone, otherwise the notification will not be displayed.

If the iPhone user denies access to files, then the computer will see the connection of the phone, but the folder with the photo will become inaccessible.

If you allow access to the iPhone without iTunes installed, you can only transfer photo and video files from the phone, but you cannot transfer images from the PC itself to the iPhone.

To transfer audio, photo, and video files, you need to install iTunes. It can be found on the Internet and is free to download for Windows.

When installing iTunes, a menu for selecting additional program functions will be displayed, you can select or refuse them. You also need to specify the installation folder.

After selecting all the functions, the installation of iTunes will begin.

Upon completion of the installation of the program, it will open. If not the latest version of iTunes is installed, then it will notify the user about this and offer to download the new version.

After installing the latest version of iTunes, the system will prompt you to restart your PC.

To connect iPhone to iTunes, connect the USB cable to your computer and launch iTunes. Here, too, you must allow access to both iTunes and iPhone.

Then iTunes will open with the iPhone connected, where the smartphone files will be on the left in the menu.

iTunes is a special program developed by Apple that is designed to sync the contents of Apple devices. Therefore, for high-quality operation of the iPhone or ipad, you need to install iTunes on your computer, since there is no other way to upload audio, photo, video files, films to the gadget. It is also worth remembering that iTunes has a set of standard drivers for the correct recognition of the iPhone by the computer.

What to do if iPhone won’t connect to PC or laptop via USB?

Sometimes it happens that the iPhone does not sync with the computer. Then you need to try the following steps:

  • Unlock your smartphone and confirm permission to access it.
  • Replace the USB cable, the reason may be a malfunction of its connectors.
  • Restart both devices. both the computer and the smartphone.
  • Disable antivirus on PC.
  • Reset Settings on iPhone.

There is an option that this version of the operating system is not suitable for synchronizing iPhone and PC, or the necessary drivers may be missing, or the version of support for Apple devices is outdated.

How to connect iPhone to computer or laptop?

There are several options for connecting an iPhone. But in order to take full advantage of the possibilities of transferring data from a smartphone, creating a backup that will come in handy when replacing, losing or damaging an iPhone, it is best to install the iTunes program on your computer.

If there is no aytyuns on the PC, then the iPhone is recognized as a flash drive or memory card. In this case, only photo and video files can be copied. It is impossible to create a backup copy, add audio files to a smartphone. About possible options and subtleties, how to connect an iPhone to a computer

USB cables for iPhone: what are there?

The USB cable for any new or refurbished iPhone is included. if there is no cable, this means one of two things: either they are trying to sell you an unoriginal smartphone (in other words, a Chinese fake), or the cable was lost by slow salon consultants who used the gadget package for their own needs.

There are two types of USB cable for iPhone:

The first is Lightning. Connectors with 8 contacts appeared on the bundled USB cables and chargers along with the 5th modification of the iPhone. The 7th modification iPhones also use Lightning to connect headphones. A distinctive feature of Lighting is that you can insert the connector into the connector from either side.

On the other side of the iPhone cable, there can now be not only a classic USB connector, but also a USB Type-C connector, which looks more like a micro-USB.

How to connect iPhone to computer via USB and why you need to do it?

Connecting an “apple” gadget to a PC via USB allows you to:

    Synchronize iPhone with iTunes: download music and other multimedia data to the device memory, transfer notes and contacts, transfer credentials. Create backups of the information stored in the device’s memory and restore data from backups. Restore and update the operating system. Free up device memory (which is worth its weight in gold) by transferring data to your computer hard drive.

All of this will not be possible if the USB connection between iPhone and PC becomes unstable. Correctly connecting your iPhone to your computer is pretty simple:

Take a USB cable and insert the 30-Pin or Lightning connector into the corresponding connector on the gadget.

How to fix if iPhone not connect with PC via USB Cable in iOS 13

Plug the connector on the other side into any of the USB ports on your computer or laptop.

Wait for the sound typical of a USB device connection. At the same time, the iPhone will vibrate to notify the owner that it is charging.

The message “Trust this computer?” Appears on the smartphone screen. Confirm by clicking the corresponding button.

An AutoPlay window pops up on the computer monitor. this already indicates a successful USB connection.

Go to “My Computer”. you will see your iPhone in the list of portable devices.

Click on the icon and you will access photos and videos that were taken with the iPhone camera. You will not be able to get to music in this way. you will have to install and run a program called iTunes.

USB connection: pros and cons

Connecting with a USB cable isn’t the only way to connect iPhone to iTunes and PC in general. iPhone with iOS version older than 5.0 can be connected to the computer via Wi-Fi. However, most owners of Apple technology “the old fashioned way” continue to use cables, and here’s why:

READ  How to connect an iPhone to a radio tape recorder via USB

iPhone : Share Internet connection with Your PC using USB cable | NETVN

    The cable connection guarantees high speed of data transfer (for USB 3.0. 4.8 Gbps). When connecting via Wi-Fi, one has to look back at the restriction set by the Internet provider. The device connected by a cable to a PC is recharged, while when connected via Wi-Fi, on the contrary, energy is consumed at an impressive rate. Connecting via USB is a very simple procedure, but not everyone will be able to organize Connect “over the air”. Only when connected via a cable can you restore data from a backup and perform a full reset.

Using USB ports to connect an iPhone also has disadvantages:

    The device is actually tied to the PC with a “string”. This limits the user’s options. to talk on the phone, he will have to interrupt “Connect”. The gadget takes up one of the USB ports. this can be a problem if there are only 2 ports on a laptop or laptop.

How to connect iPhone to computer via USB?

Apple devices have a closed architecture. many operations require the use of a PC. That is why, when buying an iPhone, the user should be ready to connect this gadget via a USB cable much more often than any of the Androids. The operation of connecting iPhone via USB seems simple, however, there are some nuances that do not allow working with this device as with a standard data carrier.

Why iPhone won’t connect to computer: possible problems

The solution to the problem of connecting an iPhone via USB very often lies on the surface. Such a situation is typical: the user connected the smartphone via a cable, waited for the iPhone to notify by vibration about charging. but then nothing happens! According to the given instructions, we see that the next step is to confirm the user’s trust in the computer. “Trust Request” does not appear on the screen of a locked iPhone. It is enough just to unlock the device. a message will appear and the problem will be solved.

    If you encounter errors accompanied by SyncServer and MobileDeviseHelper messages, check if the same time is set on the PC and the gadget. Even a slight difference in time can lead to a connection failure. If the “USB device is not recognized” error, plug the cable into a different USB port on your computer. The error can also be due to the fact that the SIM card in the iPhone does not meet the requirements of the device. To connect correctly, it is enough to activate the “Airplane mode” through the “Settings”. If the computer simply does not see the iPhone, the problem lies in the cable or in the connector on the gadget itself. In any of these two cases, the user will have to spend a lot. to buy a new “lace” or to diagnose the device with subsequent repair.

Connecting an iPhone to a PC via USB is no more difficult than Android: in any case, difficulties are possible, but their occurrence is more an exception to the rule than a rule. Another thing is that by itself, connecting the iPhone via USB will not give the user ample opportunities. he will only be able to copy and delete photo and video files taken with the gadget’s camera, and for other operations he will have to master iTunes. Working with Android in this regard is much easier: when connected to a computer via USB, a smartphone with a “green robot” is defined as a flash drive.

Setting up iPhone Windows Wi-Fi Connection Using iTunes

For those who have not lost the USB cable or can use it, the instructions will be different. They can not configure the connection with the computer, but only be in the same network with it. In this case, the setting will be carried out as follows:

  • open the settings of your smartphone and activate the connection via Wi. Fi;
  • log in to your home network;
  • now you need to set the synchronization parameters. for this you have to connect your smartphone with active Wi. Fi to your computer using a USB cable;
  • open iTunes and go to the device management section;
  • find the item “Synchronize via Wi. Fi” in the menu;
  • apply the selected setting;
  • now unplug the cable;
  • go to smartphone settings;
  • select “Sync with iTunes” and activate this option.

You will now be able to change settings and sync using Wi. Fi. The next time you sync with this computer, you don’t need to enter additional passwords. It doesn’t matter which operating system controls your computer.

Connect without iTunes

You can manage files on your iPhone using a computer without using the standard iTunes program. Windows Explorer will help us with this.

Using this method, you can only view photos and videos on your iPhone through Explorer, as well as copy the data to your PC. You cannot delete and edit files.

After that, the iPhone will appear in the “Devices and Disks” section in File Explorer.

To view the necessary files, the user needs to go to a specific folder. Click “Internal Storage”.

Click on “100APPLE”. In this folder, you can sort files by creation or modification date for more comfortable work.

Connect iPhone to PC via Wi-Fi

There is another way to connect a smartphone to a computer. creating a wireless connection. The fastest option is to use Wi. Fi. however, in this case, you will not be able to update the software or restore the device from its backup.

It is worth remembering that the active use of Wi-Fi will quickly drain the battery.

Connection errors

Connecting an iPhone to a computer is rare, but there are sync issues. This is most commonly seen in iTunes. Apple recommends that you keep your iOS as well as iTunes updated to the latest version to avoid bugs. However, the matter may also be in the malfunction of the smartphone itself. We will tell you more about problems when connecting iPhone to PC in the next article.

The health of the Windows operating system also affects the successful connection of the iPhone to the PC. You can also find out about this in our article and try to solve the problem yourself.

Currently, wired technology is inferior in efficiency and convenience to wireless. However, in certain situations, the USB cable can help to connect and synchronize the iPhone with a PC when there is no Internet or Wi-Fi or Bluetooth does not work.

Thank the author, share the article on social networks.

First connection

The first time, connecting a smartphone with a new computer, the user will be asked whether to trust this PC. If you tap Don’t Trust, you won’t be able to view or edit the data on iPhone. In this case, the phone will only be charged. Let’s take a look at how to properly connect via USB.

Please note that to synchronize the device with a PC, you need iTunes, which can be downloaded from the link below.

    Download and open iTunes and connect your iPhone to your computer. In the window that appears, click “Continue”.

Click on the device icon in the top menu to go to setting the connection parameters.

Go to the “Overview” section and set up an important function: creating backups. Here we are interested in creating copies of iCloud, which occurs automatically once a day when the smartphone is actively connected to the Internet via Wi-Fi, and the iPhone must be on charge. If you wish, you can create a backup copy manually, for this click “Create a copy now”.

To store backups on your PC and update them regularly when connected, you must enable the corresponding functions. Go down a little lower and put a checkmark in front of such items as: “Synchronize automatically if the iPhone is connected” and “Synchronize this iPhone via Wi-Fi”. Click “Finish” to complete the setup.

How to connect iPhone to computer via USB

You can charge your iPhone and manage all your files using your computer, and you don’t need to install iTunes. To connect, you need a USB cable suitable for your phone model.

READ  How to change Apple ID on iPhone

All about local area networks and network equipment

To connect an iPhone to a computer via a USB port, you will need the gadget itself, the USB cable that comes with the device, and, of course, a computer. USB cables come in several modifications (depending on your iPhone model):

It works with models such as iPhone 2G, iPhone 3G, iPhone 4G and iPhone 4S (iPad, iPad2, iPad3 and iPod Touch are also supported).

The second option is the Lightning 8-pin connector:

It fits more modern models such as iPhone 5, iPhone 5C, iPhone 5S, iPhone 6 and iPhone 6S (iPad Mini, iPod Touch 5G are also supported).

There is also a USB Type-C cable. Unlike Lightning, it can be inserted by either side and has a huge bandwidth. up to 10 Gb / s.

Modem mode

The USB cable is used for more than just charging and syncing with a computer. With it, you can organize Internet access for your PC. This feature is called “Modem Mode”. It works on both Wi-Fi, Bluetooth and cable.

    Connect your smartphone to your computer and go to “Settings”.

In the next tab, activate the function by sliding the switch to the right. If the PC is automatically connected to the network, a special panel will appear at the top of the screen that shows the number of connections.

If your PC does not automatically connect to an available network, go to the “List of Network Services” in Settings and find your iPhone.

How to connect an Android smartphone to a computer?

Modern smartphones no longer require a PC connection. In the first half of the 2000s, it was possible to install something new on a communicator or smartphone only with the help of a PC. And also a computer in those days was required for serious settings of a mobile device. Now you can connect Android to your computer without much difficulty, but this action has become extremely rare. And yet we will tell you how to connect your phone to a PC.

USB connection

There is one wired and many wireless connection methods. The first is the easiest, but there are a lot of problems with it. Sometimes the computer does not see the device, which causes natural hysteria in the user. In this material, we will try to help in this case.

If you connected your smartphone to the computer using a wire, but the desktop operating system does not react to this in any way, then you need to take a few simple steps:

Other wired connection problems

Not everyone suspects this, but an unlocked device cannot be synchronized with a PC. If you decide to connect Android to your computer via USB, then first enter the code, draw the pattern, or provide your fingerprint. Of course, this does not apply to those devices that do not have a secure lock.

Connecting via USB to a computer running Windows XP also causes certain problems. At the time of its popularity, no touchscreen smartphones existed, and therefore, by default, the corresponding drivers are not built into it. You can fix the situation by downloading the Media Transfer Protocol (MTP)

On any other computer, you may also need to install a driver. It is usually installed automatically the first time you connect via USB. But there are also exceptions when something interferes with the system. If you have such a case, then go to the “Device Manager”. In the list, you will see your device, while unnamed, marked with a yellow exclamation mark. Click on it with the right mouse button, selecting the “Update” item in the context menu. Then follow the tips on the pop-up menu. So you can automatically search for the driver in the appropriate Microsoft database or install the driver stored on the PC (then you first need to download it from the manufacturer’s official website).

The activated mode “USB-modem” can also complicate the connection to the computer. Disabled along the path “Settings”. “Wireless networks”. “”. “Modem mode”.

On more modern smartphones, this item is in the settings, in the “Connection and Sharing” section. Make sure that the slider opposite “USB modem” is in the “Off” position.

If you cannot find this item, then use the line to search for settings. And then activate the required parameter.

It should be noted that smartphones have several modes of wired connection to a PC. It is possible that you accidentally chose one that is not supported by your computer. You can change the mode by clicking on the corresponding notification (it is always displayed when the device is connected to the PC). You need to enable MTP (Media Device) mode.

On smartphones with a more recent version of Android, the item names may differ slightly. For normal operation of the device, you must select the “File Transfer” mode.

Finally, enabling USB debugging may help in some cases. To do this, follow these steps:

Open the “Settings” section and find the item “For Developers”.

In this subsection, activate the checkbox of the item “Debugging via USB”.

Connecting to a computer via Wi-Fi

There are several ways to connect Android to PC without using a cable. The easiest way to do this is to use Wi-Fi technology. Of course, your apartment should have a router, because the connection will be carried out with its help.

In theory, synchronization can be done with built-in means, but this path is too long and complicated. Therefore, we recommend that you use Airdroid or some other similar application. Let’s use his example to figure out how to connect to a PC over the air:

At the first launch, you can register an account or click the subtle button “Log in later”.

Next, the program will offer to send all incoming notifications to the computer. Click the Accept button. In some cases, in addition, you will be transferred to the appropriate section of the settings, where next to the Airdroid notification mirroring service you need to check the box.

Then you can transfer files to your computer, record the screen, take screenshots and perform other actions. On a PC, for this you need to open a browser and go to the address displayed in the top line of the application.

If you sign up for an account, you can sync by going to a simpler URL: web.airdroid.com.

If you want to end the connection, then go to the application and click on the “Disconnect” button. You can also click on the “Exit” button in the browser window, then confirm your actions.

What may be the difficulty

Due to its closed ecosystem from outside interference, Apple has closed access to the file system of its devices on computers running Windows. On computers from the company itself, everything can be opened without unnecessary problems, you just need to synchronize your device.

As practice has shown, connecting an iPhone to a computer via USB does not require special knowledge and skills, and with detailed instructions it can be done by the most inexperienced user of a personal computer. To do this, you will need:

  • Directly mobile device;
  • Personal Computer;
  • USB cable that came with the accessories to the mobile device.

How to Transfer Photos & Videos from iOS to Windows with USB in 2019

Connect the cell phone with the cord to your PC. The required software should then be installed. After installation, the computer will see your cell phone. A warning sign about trust in your PC will appear on your smartphone. Click on the line that says “trust this PC”. After that, go to your computer’s explorer. If everything was done correctly, a folder with the name of your device will appear in the explorer.

Using this method, only video or photo files can be copied from your smartphone. In order to install programs, download your favorite music, create and cut your ringtones, you will need to install a program called iTunes. You can download the program from the official Apple website. By the way, the program has a pleasant and understandable interface, thanks to which even an unsure user will be able to understand how to act in order to perform this or that action.

READ  IPhone backup where is stored

It should always be remembered that during data transfer, you cannot disconnect the device from the computer, as this may lead to the loss of personal data.!

The above methods are suitable for such smartphone models as:

  • iPhone 5 / 5s
  • iPhone 6
  • iPhone 7
  • iPhone 8
  • iPhone 10

Perhaps users of older iPhone models will ask: how to connect the iPhone 4 to a computer via USB? I hasten to answer your question. Synchronization will be carried out in absolutely identical ways, which are presented above. It is not in vain that Apple takes first place in terms of supporting its users.

It should also not be forgotten that there are replicas (Chinese copies) of popular Apple smartphones on the market. Synchronizing such cell phones, for example, through the iTunes application will be impossible due to the fact that such devices have the Android operating system installed. Synchronizing such devices will not require absolutely any additional programs. You just need to follow the very first method, there should not be any difficulties.

Basic Ways to Connect iPhone to Computer via USB

Modern high technologies make our life easier day by day. The electronics market is developing rapidly. Even in the recent past, such a scale of development seemed impossible. Now a cell phone can easily replace a camcorder, digital camera, music player, and sometimes even a computer.

After, say, you have photographed or recorded on video, you will want to save it in the memory of your personal computer, because it has more memory than a cell phone.

The article will talk about how to sync an iPhone brand cell phone with a home computer via a cable.

Synchronization of the device via WI-FI

If the iPhone does not connect to the computer via USB, you can try an alternative method of synchronization via the WI-FI network. To do this, you still need a smartphone itself, a PC and a router (Internet access point). You can also set up such a connection in the iTunes application. In the synchronization parameters, put a tick on the “synchronize via WI-FI” item. It is important that at the same time the phone has an active connection using this technology.

Bluetooth connection

This method is very exotic, since the transfer of data using such a technology will take a lot of time due to the speed of data exchange, and in general it is more complicated than others in its implementation. But still, let’s consider this option.

To do this, you still need a PC, but with a bluetooth transmitter module, and a smartphone itself. After that, the bluetooth mode is activated both on the computer and on the smartphone itself. The phone then selects your PC for pairing. Once a pair is created, bluetooth technology can be used.

Always before you start synchronizing your smartphone with a computer, make sure that the communication cord is working properly, all the necessary parameters are activated. Sometimes it happens that the user blames the technique for everything, completely oblivious to how he himself treats this technique.

These are, perhaps, all the most popular ways to connect iPhone to PC via USB. There are also many alternative options through specialized programs, but due to their complexity for a simple user, they will seem complicated. For example, compared to transferring files from a cell phone running Android, the situation is much better, but here is already a matter of taste, and, as they say, there is no dispute about tastes.

How to connect iPhone to computer via USB?

To connect an iPhone to a computer via a USB port, you will need the gadget itself, the USB cable that comes with the device, and, of course, a computer. USB cables come in several modifications (depending on your iPhone model):

It works with models such as iPhone 2G, iPhone 3G, iPhone 4G and iPhone 4S (iPad, iPad2, iPad3 and iPod Touch are also supported).

The second option is the Lightning 8-pin connector:

It fits more modern models such as iPhone 5, iPhone 5C, iPhone 5S, iPhone 6 and iPhone 6S (iPad Mini, iPod Touch 5G are also supported).

There is also a USB Type-C cable. Unlike Lightning, it can be inserted by either side and has a huge bandwidth. up to 10 Gb / s.

How to transfer photos from iPhone to computer via USB?

Now let’s go directly to iTunes. Click on the iTunes icon and in the window that opens, click the “Accept” button

In the next window, click on the phone icon (in the upper left corner). you will see the data of your device

What are the advantages of a wired connection??

  • – First and foremost is the speed of data exchange.
  • – Ability to install and uninstall applications
  • – Ability to charge the gadget
  • – Ability to restore the device
  • – Software update

Of the minuses, I can only note that a USB port is required to connect (and on some brands of computers there are only two of them) and that your iPhone should be near the computer.

Connecting iPhone to Computer via USB

To connect your iPhone to your computer via USB, you need to download iTunes. The fact is that the delivery of the program contains the necessary drivers for connecting Apple devices, and, in addition, many necessary functions for them.

So, go to http://www.Apple.com/ru/iTunes/download/ and click on the “Download” button

After you have downloaded the program, you need to install it on your computer. To do this, run the downloaded file. a window will open in which you will need to click the “Next” button

The next window shows you where the program will be installed: click on the “Install” button

After a few minutes, the installation will be completed successfully

do not forget to uncheck the “Open iTunes” tab until you need to launch the program.

Now it’s time to connect your iPhone to your computer via USB. To do this, connect one end of the USB cable to the USB input of your computer, and the other, respectively, to your iPhone.

When connected, your iPhone will vibrate to indicate charging.

The installation of the device driver will begin, upon completion of which the device autorun window will pop up on the monitor

Then the connected device will appear in the “My Computer” tab as an additional icon

By clicking on it, you will see that the internal memory of your device will open.

You can only view photos and videos, however, you can listen to music only if you are connected via iTunes.

The computer does not see the iPhone via USB but is charging: what to do?

But what if you connected your iPhone via USB, charging is in progress, but the computer still could not detect your iPhone? Let’s look at some methods to solve this problem.

  • – First you need to reboot both devices in order to make sure that neither of them freezes.
  • – The next step is to check all USB ports: they may not work due to broken contacts. To check, take any USB flash drive and check each USB port one by one.
  • – Disable third-party software (antiviruses, firewalls etc.), do not forget to include them after checking.
  • – Also unlock your phone, perhaps there will be an inscription “Trust this computer?”

Without an affirmative answer, no synchronization will take place, only charging.

connecting, iphone, computer
  • – Try changing the USB cable. it may be out of order. Sometimes, even without visible damage, the cable is inoperative.
  • – Try resetting your phone (don’t forget about backups)
  • – You can also clean the USB connector of the cable. it may be dirty.
  • – Check if the time is set correctly both on the computer and on your phone (even a small discrepancy will lead to the computer not recognizing the iPhone via USB)

If more than one method did not help you, then most likely you have a broken charging connector, and you should change it at a service center.