12x12 She Shed Plans - Free PDF Download | MyOutdoorPlans (2024)

This step by step diy project is about 12×12 she shed with front porch plans. If you want to build a cute she shed, I’ve got you covered with step by step instructions and free plans. This shed is built on a sturdy 2×4 framing with studs every 16″ on center. The shed has a gable roof and features double 5′ doors on the front and two side windows. Moreover, I have designed shed with many sizes so check them out, as well. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

12×12 She Shed Plans – Free PDF Download

Cut & Shopping Lists

• A – 4 pieces of 4×4 lumber – 12 ft long SKIDS
• B – 2 pieces of 2×6 lumber – 12 ft long, 10 pieces – 141″ long JOISTS
• C – 3 pieces of 3/4″ plywood – 48″x96″ long, 3 pieces – 48″x48″ long FLOOR
• D – 2 pieces of 2×4 lumber – 12 ft long, 1 piece – 137″ long, 12 pieces – 90″ long, 8 pieces – 8″ long, 8 pieces – 25″ long, 4 pieces – 50″ long, 8 pieces – 35″ long SIDE WALL WITH WINDOWS
• E – 2 pieces of 2×4 lumber – 12 ft long, 1 piece – 137″ long, 12 pieces – 90″ long SIDE WALL
• F – 2 pieces of 2×4 lumber – 137″ long, 1 piece – 144″ long, 10 pieces – 90″ long BACKWALL
• F – 2 pieces of 2×4 lumber – 38 1/2″ long, 1 piece – 137″ long, 1 piece – 144″ long, 8 pieces – 90″ long, 2 pieces – 78 1/2″ long, 6 pieces – 6″ long, 2 pieces of 2×6 lumber – 63″ long FRONT WALL
• G – 9 pieces of 5/8″ T1-11 – 48″x96″ long, 2 pieces – 4’x93″ long, 1 piece – 13″x48″ long SIDING
• H – 1 piece of 2×4 lumber – 12 ft, 2 pieces – 8 ft, 1 piece – 29″ long 10xTRUSS
• I – 4 pieces of 2×4 lumber – 8 ft, 10 pieces – 6 1/4″ long 2xOVERHANG
• J – 4 pieces of 1/2″ plywood – 10″x96″ long, 4 pieces – 4’x8′ long, 4 pieces – 4’x4′ long ROOF SHEETS

• 8 pieces of 1/2″ plywood – 4’x8′
• 4 pieces of 4×4 lumber – 12 ft
• 14 pieces of 2×6 lumber – 12 ft
• 5 pieces of 3/4″ plywood – 4’x8′
• 21 pieces of 2×4 lumber – 12 ft
• 73 pieces of 2×4 lumber – 8 ft
• 6 pieces of 5/8″ T1-11 – 4’x8′
• 8d nails, 2 1/2″ screws, 3 1/2″ screws
• wood filler,wood glue, stain/paint
• shed anchors
• rafter ties
• nails for the plates / ties
• structural screws for plates / ties
• strong tie plate
• strong tie plate

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One day

Related

• PART 1: 12×12 She Shed Plans
• PART 2: 12×12 She Shed Porch Plans

How to build a 12×12 shed with gable roof

The first step of the project is to build the floor for the 12×12 shed. Cut the joists from 2×6 lumber using a good saw. Align the beams, making sure the corners are square, drill pilot holes and insert 3 1/2″ screws to lock them together tightly. Place the joists every 16″ on center and make sure the corners are square.

After assembling the floor frame, you need to attach the 4×4 skids. Use metal connectors to secure the skids to the joists, after aligning them or toenail them. The skids will lift the frame from the ground and protect the components from the elements. Therefore, your floor components will be protected from moisture.

Continue the project by attaching the 3/4″ plywood sheets to the floor frame. Leave no gaps between the floor sheets and secure them into place with 1 1/4″ screws, every 12″ along the joists.

Select the location for the she shed and remove the top vegetation layer. Level the surface thoroughly and then fit the pressure treated floor frame. You can also fit solid concrete blocks under the skids or at least gravel.

Assemble the side walls from 2×4 lumber. Cut the studs and the plates at the right dimensions. Drill pilot holes through the top plates and insert 3 1/2″ screws or framing nails into the studs, using the information from the diagram. Place the studs, every 16″ on center. Make sure the corners are square for a professional result. As you can see in the plans, you need to fit 1/2″ plywood fillings to the double end studs. Measure the diagonals and make adjustments until everything is perfectly balanced.

Build the opposite side wall for the garden she shed using the same techniques described above. Frame the 32″x50″ windows and the door openings so you can make the most of the shed. You can adjust the size of the door and window, but still use the same techniques described above.

Use 2×4 lumber for the double headers. Fit 1/2″ plywood pieces between the header beams. Add glue and insert 2 1/2″ screws through both sides.

Continue the project by assembling the front wall. As you can notice in the diagram, you need to leave enough space for the 5′ double doors. You can easily adjust the size of the door to suit your nails. As you can see in the plans, you need to install the jack studs to reinforce the structure of the shed. Use 2×6 lumber for the double header. Fit 1/2″ plywood between the double header beams. Place the studs every 16″ on center. Use 3 1/2″ “screws to assemble the frames.

Build the back wall using the same techniques described above. You should also notice the double plates that will add more rigidity to the walls and to the overall framing.

Lift the side walls and lay them to the floor of the shed. Align the edges with attention and use a spirit level to plumb the walls. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor frame, every 8″. Secure the walls into place temporarily with braces. Fit the front and back walls to the shed floor and lock them to the adjacent walls with 2 1/2″ screws. Make sure the corners are square and insert screws through the bottom plates into the floor, as well.

Build the exterior walls from 5/8″ T1-11 siding. Use 8d galvanized nails to secure the sheets to the wall frames. Align everything with attention and insert the nails every 8″ along the studs. Make the cut outs around the window openings.

Attach the rest of the sheets to the opposite side wall of the shed. Align the edges with attention and secure them to the wall studs with 8d nails or screws. Make sure you leave no gaps between the sheets for a professional result.

The first step is to build the 2×4 rafters. Use a miter saw to make a 25.2 degree cut to one end of the rafters. In addition, make the birdsmouth cut to the rafters.

Cut the bottom rafters and then lay all the components on a level surface. Align the edges flush and leave no gaps between them.

Cut and fit the middle support to the trusses.

Use 1/2″ plywood for the trusses. Mark the cut lines on a piece of plywood and then get the job done with a saw. Lay the gussets over the joints and then insert 1 1/2″ nails to lock them into place tightly. Alternatively, you can use strong tie plates over the joints (listed in the cut list).

Fit the trusses to the top of the she shed. Plumb the trusses with a spirit level and secure them to the plates with rafter ties. Place the trusses every 16″ on center.

Fit the 5/8″ T1-11 siding sheets to the front of the shed. Align the edges flush and insert 8d nails, every 8″ along the framing. Leave no gaps between the sheets for a professional result.

Alternatively, you can attach 5/8″ OSB sheets to the exterior of the shed and the cover them with house wrap. Last but not least, install the siding to the exterior of the shed. You should choose the alternative that suits your needs best.

Fit the sheets to the back of the shed, as well.

Use 2×4 lumber for the overhangs. You can adjust the size of the overhangs by making the blocks longer of shorter. Drill pilot holes through the rafters and insert 3 1/2″ screws into the blockings.

Fit the overhangs to the front and back of the shed. Align the edges flush, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Use 1/2″ plywood for the roof sheets. Attach the panels to the roof of the shed and align the edges flush. Insert 1 5/8″ screws to secure the sheets into place, every 8″ along the rafters.

This she shed is easy to build and extra sturdy. You can easily fit insulation between the studs and then attach drywall sheets to the interior of the shed. In addition, you can notice the front porch. I will show you how to build the rest of the she shed in PART 2.

Make sure you check out the rest of the project, so you learn how to frame the roof and how to attach the door and the trims to the shed. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

This woodworking project was about 12×12 she shed plans free.If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR:

Ovidiu

I've been a designer and a woodworker since I first developed consciousness.