Apple does not turn on after iPhone update

iPhone 6/7/8 / X / 12 won’t turn on lit apple on and off, how to solve?

Sometimes a glowing apple on the iPhone screen is on, it hangs and turns off, then the screen will be black, it does not respond to pressing. There are quite a few probable reasons for the appearance of this trouble. Today we’ll look at the most common iPhone won’t turn on problems and try to find a solution.

The reasons why the apple burns but the iPhone does not turn on

Before referring to the instructions, you need to understand what caused the iPhone to not turn on and the apple on the black screen burns. The following reasons are listed:

Sometimes the battery is discharged, the phone is completely discharged, so an apple appears. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on.

The phone freezes when you turn it on, probably a breakdown of the “Power” button. Occurs when disassembling an iPhone.

The device does not boot further than the apple. problems with the power supply of the device This often happens with phones during network jumps when charging.

Charging controller is broken, there was a power outage.

Problems with the power supply circuit of the device. The device lay on the charge during a strong power surge.

Problems with the motherboard, while the phone itself may even boot sometimes and even work for a while. True, the glowing apple on the iPhone screen will appear more and more often until it stops starting normally at all.

What to do if the iPhone does not turn on and the apple hangs

An easy way to solve the problem is to reboot the device using the Home and Power buttons, which must be held down and held for 10 seconds. If the reboot does not help, then an update or flashing of the device will be required. To do this, run iTunes on your PC.

Step 1: Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to the phone yet). Turn off the iPhone while holding the HOME POWER buttons (on iPhone 7, you must hold HOME and. Volume)

Hold down the HOME button and connect the USB cable to the device. Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen.

A notification will appear on the computer screen that the device is in recovery mode

Step 4. Now just click on the Restore button Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple’s servers. In this case, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.

DFU mode

If your iPhone won’t turn on, even after the one tried above, there remains one more way. restore iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step-by-step instructions.

There is an easier way to solve this problem, using Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Logging in or out can help you solve “the apple is on but the iPhone won’t start”.

Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to your computer (or Mac) using a USB cable.

We launch the program. You will see several buttons, but only one will be active. “Enter recovery mode”. Click on it and wait for a while. You will see the iTunes logo on the display of your iPhone.

Then press the button “Exit recovery mode”. We are waiting for the time it takes to restart your iPhone. Done!

Useful software for iPhone / iPad is always in great demand among users and often ends up in the collection of selected programs. Be sure to take note of the Tenorshare ReiBoot utility. It allows you to enter or exit iPhone recovery mode in the easiest and fastest way. And it will help when standard system methods do not work.

IPhone Freezes When Turning On: Possible Causes

Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones got into a cyclic reboot. they switched on and off sequentially until the charge ran out.

Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white apple”!

However, if the iPhone turns on before the “apple” and turns off, this may be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white apple”:

    Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, you should not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.

The problem of the “white apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:

From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.

The easiest way to get rid of the “white apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.

What to do if iPhone won’t turn on after jailbreak?

Turn off your smartphone.

Hold the volume up button on the side of your iPhone.

With the key pressed, try to start the mobile device.

An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.

It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.

If the smartphone does not turn on even with the volume key pressed, the user has no choice but to jailbreak. We talked about several ways how to remove jailbreak from iPhone. in case of the “white apple” problem, it is recommended to flash the device.

Re-flashing. it just sounds scary, in fact, the procedure is quite simple:

Launch iTunes and connect the iPhone to PC with a cable.

Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on iPhone in our article on DFU-Mode.

ITunes will notify you that iPhone has been detected in recovery mode.

Click on the “Restore iPhone” button.

iTunes itself will download and install the new firmware on the gadget. You just have to wait for the completion of the procedure.

Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.

How to get rid of the “white apple” if the iPhone is not jailbreakable?

If the “white apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It is very simple: if the call is in progress, it means that the download of the gadget is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is an opportunity to demolish the “buggy” applications that provoked the problem of the “white apple”.

You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.

Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.

Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white apple” does not go? Such a test result indicates a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “apple” gadget to the caring hands of the service center masters.

iPhone won’t turn on: apple is on and off

Salon consultants make a helpless gesture: iPhones, which do not turn on after the “apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.

The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white apple”: the gadget starts up, the “apple” burns on the screen for a long time, then the screen just goes out.

Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can also fix the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white apple”?

If the problem of the “white apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.

But if the “apple” “hangs” on the iPhone, which did not go through the jailbreak procedure, for the owner of the gadget it is a wake-up call. It is very likely that the iPhone refuses to turn on due to a hardware failure, to fix which you will have to contact the service.

IPhone Recovery

The main disadvantage of restoring is deleting settings and content. If you recently made a backup, then the losses will be minimal, but still you cannot do without them. a working phone is more important. Since you are dealing with a software error, to fix it, you need to put the phone in DFU mode.

If the call does not go through, or you cannot find the files responsible for the error, then you will have to restore the iPhone to fix the problem.

Causes of the problem

Among the reasons for such failures are:

  • interruptions during an iOS update;
  • incorrect installation of programs;
  • moisture penetration into the device;
  • processor malfunction.
READ  How to back up WhatsApp to iPhone

Second option

If the first method did not work. the iPad still does not load, the apple is on, you can try the second method. This method is considered more literate, but it is a little more difficult for new users of Apple devices:

  • We connect the device to the PC and launch iTunes.
  • Turn off the device and wait until the shutdown process is completed correctly.
  • We press on the “Power” button, and after three seconds. “Home”. Hold the keys at the same time.
  • After 10 seconds, release the power button, but continue to hold “Home”.

At the end of the procedure for entering the special mode, a message will appear in the iTunes application that the program has found your device in a recovery state. However, you will need to restore your iPad before using it with iTunes at the same time.

The same procedure can be performed in the case when the iPad 2 does not turn on, the apple is on.

If the apple logo is lit on the display and the iPad won’t turn on

Almost every owner of the popular “apple” tablet at least a couple of times had to deal with failures during the operation of the device. It happens that the iPad does not turn on, the apple on the display is on. The problem is not that uncommon, so Apple Support has prepared several recommendations in case of such complaints from iPad owners.

First option

The easiest way to enter a device into DFU is to simultaneously hold down the Home key and the power button for 10 seconds. Then you need to release the power key and continue to hold the “Home” button.

How to troubleshoot

There are the following ways to fix the problem when iPad won’t turn on, apple is on:

  • Follow Apple Support Best Practices.
  • Entering the device into DFU mode.

It’s better to use the first method for a start. If there is no result, it is worth resorting to the second. It should be added that there are two options for entering iPad into special mode. at the end of the article we will consider how to do this.

Switching to DFU mode

It is worth noting that this is a more extreme way out of the situation when the apple is on, but the iPad does not turn on. There are two methods for entering a gadget into a special mode.

Apple Support Best Practices

If during startup for a long period of time the iPad does not load, the apple is on, you need to do the following:

  • Connect the gadget to the PC and open iTunes.
  • Perform a forced restart (press and hold the Sleep / Wake and Home keys at the same time).
  • Under no circumstances release the keys after the company logo reappears on the display. the key combination must be held until the recovery mode screen appears.
  • On the screen that appears prompting you to restore or start the update process, select the “Update” function. The app must reinstall iOS while saving data.

The Apple app must download the software for the device. If for some reason the procedure takes more than 15 minutes, the tablet will exit the recovery process, then you will need to repeat all the steps again.

The above tips will also come in handy for owners of “apple” devices, for which the iPad 2 does not turn on, an apple is burning on the screen.

The apple lights up and the iPhone turns off. what to do

Connect iPhone to computer with USB cable and launch iTunes. Make sure iTunes is up to date. You can check for iTunes updates on Windows by going to Help → Updates, on a Mac, from the Updates tab in the Mac App Store. You can download the current version of iTunes on the official Apple website.

Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds.

Then release the Power button and continue holding the Home button until iTunes detects the device in recovery mode (about 10 seconds).

In iTunes, click “Restore iPhone” and confirm to start the restore. Important! All media and other device data will be erased. The iPhone will also have the latest iOS version for your device.

In the window that opens, click “Next” and “Agree”.

Note that initially iTunes will download the version of iOS required for the device from Apple servers, and only after that the recovery will begin. You can track the progress of the firmware download by clicking on the button in the upper right corner of iTunes.

It should also be emphasized that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and starts direct recovery, the progress bar will appear on the iPhone display.

After successfully restoring the iPhone, all that remains is to make the initial setup and start using the device.

The apple lights up and the iPhone turns off. what to do

The apple lights up on the iPhone, after which the smartphone turns off. the wording of one of the most common iPhone problems. It can appear really suddenly. Many users who have encountered a problem say on our forum that their smartphones turned into “brick” after making a call, removing some applications from the device or other very standard actions. Whatever reason brings your iPhone to a similar state, this guide will help you solve the problem.

What to do if iTunes does not detect iPhone in DFU mode

There are several reasons why iTunes may not detect the iPhone in DFU mode, ranging from the old version of iTunes to a technical malfunction. Before going to a service center or starting repairs on your own, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try to connect iPhone to iTunes on another computer using a work cable.

Also, the problem might be an iTunes error. In this case, iTunes must be reinstalled, but do it correctly by removing the program components in the following order:

  • iTunes.
  • Apple Software Update.
  • Apple Mobile Device Support.
  • Bonjour.
  • Apple Application Support (32-bit).
  • Apple Application Support (64-bit).

An extensive guide on how to properly reinstall iTunes is available here.

If nothing helps to determine the iPhone in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit, and after replacing it, the iPhone starts to function normally again. For detailed instructions on how to change the battery yourself on various iPhone models, visit our website:

But be warned, there may be a problem with other iPhone components, so the best way out of this situation is to go to a service center.

IPhone hardware breakdowns

If the iPhone won’t turn on even after restoring the settings, it may be due to other hardware problems. These include:

Broken Home or Start buttons. To check, try using the commands one by one and track whether the smartphone responds to them. If there is a breakdown in them, repair is needed at a service center.

Power supply problem. Was the device charging during a thunderstorm or a sudden power outage, after which the “apple” appeared? Most likely, there was a failure in the settings. A “deep reboot” will help fix the situation.

apple, does, turn, iphone, update

Normal wear and tear of the battery or a broken charger. Checked by replacing the battery and purchasing an analog or original charger.

Flash memory malfunctions. Occurs when the iPhone is “too active”. For example, you have completely loaded the device’s memory. In such a situation, only computer diagnostics from professionals will help.

Advice. If after all the manipulations, reboots and flashing attempts, your iPhone does not turn on, the “apple” is on, contact the service center. You cannot unwind the device yourself. It is easy to damage the motherboard, tear off the ribbon cable, or break the battery.

Reflashing iPhone with “white apple

Redesigning iPhone firmware is not that difficult. Follow the instructions below:

download the iTunes application on your computer and connect a USB cable to it (without a phone yet);

How To Fix An iPhone that Won’t Turn On After iOS 14

hold down the “Home” and “Start” buttons for 10 seconds, then connect the mobile device to the cable, holding only the “Home” button;

when iTunes detects the device, release the start button;

flash and restart iPhone.

Important! When the iPhone is launched in DFU mode, the backlight does not work and there is no logo on the screen. Only upon completion of the software update will the “white apple” light up and the standard launch will take place.

Reasons for the appearance of the “apple” on the screen:

In 2013, there was an epidemic of “white apples” on iOS 7. It happened by the Evad3rs team, which tried to release the first jailbreak for these devices. As a result of the flaws in the program, it was necessary to restart the iPhones until they were completely discharged.

Modern reasons that prevent a smartphone from starting correctly are as follows:

Advice. Allow your smartphone to cool down before starting a deep reset or doing iPhone repairs on your own. Leave it off for 2-3 hours. When the phone gets cold, try turning it on again.

What to do if the iPhone does not turn on, the “apple” is on?

Filling the device memory by 100%, voltage drops during charging and just a system failure are some of the reasons why the iPhone does not turn on, the “apple” is on. This is a common Apple technology malfunction. And in 90% of cases, you can get rid of the “white apple” on your own without contacting a service center.

How to fix the “white apple” after a failed jailbreak

If the iPhone does not turn on and the “apple” is on, there may have been an attempt to hack the file system or jailbreak. Such programs are installed for free access to App Store applications, unlocking a smartphone to use any SIM card, as well as for installing Cydia applications.

To fix the situation, follow these steps:

hold the button to increase the volume;

Such actions start the device without jailbreak. If the iPhone does not load correctly, you need to uninstall the program. To do this, you should reflash your mobile phone.

m. Proletarskaya / Peasant outpost

Telephone:
7 (999) 998-92-94

The address:
Moscow, st. Vorontsovskaya, 48

Working hours:
Mon-Fri from 10:00 to 20:00.
Sat-Sun from 11:00 to 17:00.
We work without holidays and weekends.

Blog about modems, routers and gpon ont terminals.

Discharged battery

Banal utterly, but one of the most common reasons. The user is sure that the phone’s battery is charged, but it is almost completely discharged. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on. By the way, this is also possible in the event of a charger malfunction. The user thinks that the device is charged, but he just finally sat down. Try charging from a computer via a USB cable.

iPhone won’t turn on and apple is on. what to do?!

Tablets and smartphones from Apple have long won the reputation of being fairly reliable devices. And the iOS operating system did not give any particular reason for criticism. Nevertheless, sometimes problems do happen. electronics, whatever one may say, are capricious thing. One of the frequent occurrences is that the iPhone does not turn on and the apple on the screen burns. On this, the phone freezes and you will not be able to turn it off in the usual way. There are quite a few probable reasons for the appearance of this trouble. Let’s try to figure them out and, if possible, try to fix it ourselves.

Hardware problems

Unfortunately, the reasons why the iPhone does not turn on and the apple on the screen is lit are very often problems with the hardware stuffing of the phone. And then flash it. don’t flash it, but it won’t work anyway. What could be the reason?

READ  Deleted contacts from iPhone how to recover

Unfortunately, only those who are friendly with a soldering iron and a multimeter can fix this kind of malfunction with their own hands, the rest of the users can only take it to the service center for repair.

Software crash

If you have recently installed any application before, digging through the settings or tried to jailbreak, then with a high degree of probability we can say that this is exactly what causes a crash and the appearance of a glowing apple.
Very often the so-called “hard reset” helps. restarting the phone using the Home and Power buttons, which must be pressed and held for 8. 10 seconds. In more than half of such cases, the iPhone then boots up and works successfully. The main thing. do not forget to disconnect it from the computer or charger before that.
Did not help? Then you should try to reflash the device. To do this, you need to launch iTunes on your computer, and then connect your iPhone to your computer with a USB cable. then turn it off by holding the Home and Power buttons. You need to hold it until the screen goes out, after which you need to release the Power button, but do not release Home. This will put the iPhone in DFU mode. The screen will be black, but a message should appear on the computer that the device is in recovery mode. Let go of the “Home” button. In the iTunes application, click the “Restore” button, after which the process of downloading and installing the new firmware on the phone will begin.

After this procedure, you will receive a “clean” device, without settings and additional programs, and the burning apple on the iPhone should disappear.

Reset iOS settings

If the iPhone does not turn on periodically (out of 5 times, no more than 2-3 freezes on the Apple logo), then before contacting the service center and experimenting with the DFU mode, it will not hurt to roll back the operating system parameters to the “factory” state. The procedure will not take even 10 minutes, and even a backup copy will not be needed: the content stored in memory will not disappear anywhere.

Reset starts from “Settings”, menu “General”. The desired section is at the bottom of the list, right above the “Turn off” button.

After the transition from the actions that appear, it remains to select “Reset all settings”, enter the PIN code (verification via Touch ID or Face ID is not available) and wait until iOS clears the parameters and restarts the iPhone.

Often, a reset is already enough to get rid of freezes and technical problems when an apple blinks or the iPhone screen starts to blank out unexpectedly. But even more often, you can’t even look into the “Settings”. iOS doesn’t even load. Therefore, it’s time to move on to universal methods.

IPhone does not turn on (apple burns and goes out): from reasons to reset

Hello everyone! Today I ran into a problem. the iPhone does not turn on, the apple is on, and the smartphone itself just goes out. at first it seems to turn on, then it turns off and it goes out. And so constantly when you turn it on.

Apple mobile technology rarely encounters unsolvable technical problems and errors. But the problem with the iPhone not turning on or hanging on the apple logo has already become overgrown with legends and has become a widespread phenomenon. And that means it’s time to figure out the details and find out why the iPhone does not turn on, the apple burns and goes out, and how to save mobile equipment using iTunes.

Reasons why the Apple logo is lit and the iPhone won’t turn on

  • System crash caused by software problems or recent updates to the iOS operating system. In some situations, the problem also appears when interacting with unsupported characters. we are talking about hieroglyphs sent via iMessage, which on some versions of iOS lead to an emergency shutdown of the iPhone.
  • Battery discharged or defective.
  • The power adapter and charging cable are damaged and are not able to charge the iPhone even up to 5%, which is why the apple logo does not disappear.
  • Mechanical damage: iPhone dropped and constantly reboots, remained under water for a long time, or lay for several hours in the sun or in the cold.

IOS Restore or Update via iTunes

ITunes. Apple’s media combine. is often viewed with distrust due to its button-cluttered interface and confusing navigation. In fact, the tool: it will help you filter both the entertainment media library, and will help with the recovery of a locked or non-working iPhone.

The only thing you have to deal with is downloading and installing the latest version of iTunes, and connecting your iPhone to your PC using a USB cable. Next. go to the parameters of mobile technology, presented in the “Overview” section.

It is advisable to prepare an up-to-date backup copy of the contents of the internal memory at the bottom of the interface before starting the procedure. Formally, no data can disappear when the iPhone is restored to work. But extra safety net won’t hurt. Backups are generated and stored: either on the hard drives of the computer, or in the iCloud cloud storage in the iOS settings.

Regardless of the choice, you will have to return to the top of the interface and click on the “Restore iPhone” button. iTunes will automatically download the update files and transfer the latest iOS version to mobile devices in the background. The procedure takes on average up to 30 minutes (this is due to the preparation and preliminary unpacking of files before updating or restoring). After several reboots, the problem with the “iPhone does not turn on, the apple is on and off” will disappear.

IPhone Recovery via Third Party Software

Unofficial software tools handle iOS problems like iTunes. And sometimes they offer even more: an intuitive interface, a predictable course of actions and recommendations for beginners.

The same diagnostic service ReiBoot, adapted for computers with Windows and MacOS, offers in a matter of moments:

  • Run DFU mode without holding the buttons on the iPhone case, but through a special menu in the interface.
  • Return to standard mode or go to a special section with “Support”. where tips appear for situations when an apple is on or mobile equipment does not respond to pressing.

It is easy to interact with ReiBoot: the developers first suggest connecting the iPhone to the computer using a cable, and then, in the interface that opens, select the “Enter recovery mode” item.

How you have to proceed further depends on the reason for the appearance of the non-disappearing logo and the version of the iPhone (4, 5S, 6, 6S, 7 or newer). But with a 99% probability, ReiBoot will first download the stable version of iOS from the official Apple servers (either new, or the current one, but “reset” to factory settings).

Then it will automatically start the update process. The procedure takes from 15 to 30 minutes, depending on the speed of the Internet, the amount of space occupied on the internal memory of the iPhone and the number of errors found in iOS.

The cable connector does not work

The cause of this malfunction may be either dirt in the connector or damage to the contacts in it. To fix the problem, you need to do the following:

  • Using a syringe, moisten the connector liberally with alcohol and leave for a few minutes.
  • Re-wet the connector and use a medium-hard brush or toothbrush to remove any dirt.

Why the iPhone does not turn on: what to do when the apple is on and off

For the owner of an “apple” device, the biggest nuisance is an “apple” that is always glowing on the display or, in general, a “black screen”. The device entered an infinite boot cycle or does not turn on at all. Often this is a consequence of a malfunction of the motherboard of the gadget and only a service center can help.

So, let’s figure out what problems can be when the iPhone or iPad turns off by itself, why the apple burns and goes out on models 4, 4s, 5, 5s, 6, 6s, what to do in such cases.

Why iPhone won’t turn on: make a diagnosis

Outwardly similar symptoms can be the result of completely different malfunctions. Correct diagnosis. 90% success, so below we will analyze in detail the possible options for breakdowns.

The battery is out of order and needs to be replaced

If you do not contact the service center, the chances of purchasing an original battery for replacement are zero. When buying a battery, be sure to check it for leaks, swelling and corrosion. If possible, check the voltage with a tester.

Power button does not work

The power button consists of two elements: a film switch and a plastic pusher, it is he who sticks out of the case and you press it with your finger. When enough dirt accumulates between the pusher and the button, the pusher cannot reach the button and the iPhone will not turn on. First, let’s try to wash away the accumulation of dirt with rubbing alcohol, medical grade or isopropyl alcohol. In no case do not take vodka, eau de toilette, glass cleaner for this operation. In addition to alcohol, these liquids contain a fair share of water, it will remain inside the device and cause corrosion.

  • Pour alcohol into a syringe (5 ml is enough) and putting a needle on it, drip onto the power button. After 8-10 drops have seeped under the button, press it several times, vigorously but not roughly. Dripping alcohol again. Repeat the procedure three to four times. If the reason for the inoperability of the button was contamination, it will begin to respond to pressing after the first call.
  • If manipulations with alcohol did not help, the membrane switch itself is faulty and it must be changed.
  • Disassemble the iPhone as in the instructions above. In the upper part of the case, unscrew the screws that secure the headphone jack, power button, volume rocker and mute switch.

iPhone does not turn on, lights up “apple” and goes out

A white “apple” glows on the screen either continuously, until the battery is discharged, or the device cyclically overloads every few minutes. This can happen for the following reasons:

    A swollen battery will deform the device board. This malfunction is more typical for the third generation iPhone, where the battery is installed between the “trough”. the bottom of the case and the motherboard. Deformation of the board leads to breakdown of contacts and as a result the device “hangs” on the splash screen. After replacing the battery with a new one, normal operation of the device may or may not be restored. If we get lucky.

The device hangs on the “apple” after a factory reset

To get your iPhone back to normal, you need to do the following:

  • Turn off the device by long simultaneous pressing of the “Power” and “Home” buttons
  • Put iPhone into DFU mode: Press and hold the Home and Power buttons; keep the buttons pressed for 10 seconds; release the Power button while continuing to hold the Home button; hold the Home key until iTunes detects the new device in recovery mode (approximately 10-15 seconds).

What to do when the iPhone is frozen on an apple?

Your iPhone stuck on an apple and won’t turn on? Don’t be discouraged, even the best gadgets can freeze, not work correctly. In our publication, we will tell you what to do when the iPhone does not turn on, the apple is on. Our step-by-step instructions will help you fix a phone failure on your own and you will not need to contact a service center.

READ  iPhone does not see wired headphones what to do

How to Flash iPhone via iTunes

Flashing or restoring iPhone is the last option to fix your phone crash. After flashing, all data will be erased from the iPhone, but for that you will return the phone to work. In such cases, you always remember about the backup made and the ability to restore all data from the backup.

  • Connect iPhone to PC or Mac via USB / Lightning.
  • Press and hold the “Home” and “Power” buttons (iPhone 7, iPhone X, iPhone 11 and others instead of the “Home” volume down button).
  • You must hold down the buttons until the message “iTunes has detected iPhone in recovery mode” appears on the computer. Click “OK”.
  • In the iTunes panel, click the “Restore iPhone” button.
  • Then you need to click in order to confirm the buttons “Next” and “Agree”.

After the steps taken to enter iPhone DFU mode, nothing will be displayed on the phone screen, only after downloading the firmware you will notice a progress bar when the recovery process starts.

After restoring iPhone, you need to do the initial setup and restore data from the backup.

How to Hard Reset on iPhone

Our blog already has detailed instructions on what to do when the iPhone does not turn on, in which case we also advised to do a Hard Reset. This method helped many, comments with gratitude confirm this.

To hard reset your iPhone:

  • Press and hold the “Home” and “Power” buttons (if you have an iPhone 7, iPhone 8, iPhone X or iPhone 11, instead of the “Home” button, press the volume down button.
  • You must hold the buttons for at least 10 seconds, after which the iPhone should turn on.

    Hard reset iPhone

    If your iPhone has a slight crash, then this method should help. If, nevertheless, the Yabloko logo continues to burn and the iPhone does not turn on, but goes out and turns off, then. Need to update or reinstall (reflash) iOS using iTunes.

    How to fix if iPhone is frozen on apple

    So, if we divide all the options that were listed above, they can be divided into two groups:

    • Software glitches.
    • Mechanical damage.

    If your iPhone has become like a “brick” and when you turn it on, only the apple lights up, and then nothing happens, the phone does not turn on, you must do:

    • Hard Reset iPhone.
    • Update and reinstall iOS using iTunes.

    Why the apple burns and the iPhone does not turn on

    The reasons for the failure can be different, the most common are:

    • The iPhone battery is discharged and the phone can only turn on until the apple and then turns off.
    • IOS operating system in iPhone.
    • Incorrect iOS update download.
    • Operating system crash due to jailbreak.
    • Hardware problems due to mechanical damage.
    • Water ingress into the iPhone resulting in a short circuit.
    • The Power button (on / off button) stopped working.

    We will analyze all these reasons and try to give very clear instructions so that you can fix the iPhone stuck on an apple.

    apple, does, turn, iphone, update

    iPhone stuck on an apple

    How to Update or Restore iPhone via Finder

    Currently, Mac owners with macOS Catalina can update and restore iPhone via Finder.

    To restore or update iPhone on Mac with macOS Catalina:

    • Connect iPhone and Mac with Lightning to USB cable.
    • On iPhone, a “Trust this device” notification will appear, click “OK”.
    • Open “Finder” in the “Places” section and the iPhone icon will appear.
    • Click in the “Finder” on the iPhone item, all the information will open, where there is an opportunity to backup, update or restore the iPhone.
    • Follow all the steps that we described as for iTunes.

    If our advice did not help you, then with a probability of 95% your iPhone stuck on an apple due to internal mechanical damage. In such a situation, you need to go to the service center. It is better, of course, that it be an official or certified Apple service.

    How to update iPhone via iTunes

    • Connect iPhone to PC or Mac.
    • Perform a Hard Reset on iPhone (instructions above).
    • On a PC or Mac, a recovery window will appear in iTunes, you must click on the “Update” button.

    After updating and installing a new version of iOS, the problem should be resolved. If, nevertheless, the update did not work, and the burning apple on the iPhone screen does not disappear, proceed to flashing iOS.

    Force restart if iPhone won’t turn on

    If iPhone won’t turn on after iOS 12 update. We recommend performing a forced reboot. It is done differently depending on the model of your iPhone.

    So, for example, to make a forced restart on an iPhone 8 or iPhone 8 Plus, then follow these steps:

    • Step 1: Press and quickly release the Volume Up button.
    • Step 2 Press and quickly release the Volume Down button.
    • Step 3: Press and hold the power button until the company logo appears on the screen. Hold the power button for a few seconds until the “Swipe to turn off” slider appears

    To force restart iPhone 7 and iPhone 7 Plus, you need to do the following:

    • Step 1: press the power button and the lock button without releasing them.
    • Step 2: press the volume button.
    • Step 3: Hold these buttons until the screen turns off and the logo appears.

    If you have an iPhone 6S, then you need to follow these steps:

    • Step 1: Press the Home and Power buttons at the same time.
    • Step 2: wait about 7 seconds.
    • Step 3: Your screen should go blank and the Apple logo icon should appear.

    Check your cloud storage if iPhone X / 8/7/6 / 5s won’t turn on

    Oftentimes, iPhones have disk errors due to insufficient memory and lack of external storage options. It is highly recommended that you check the available memory before installing iOS 12. To install the new version of iOS 12, you need 4 GB of free space.

    • 1. Go to “Settings”.
    • 2. Open the “General” tab.
    • 3. Open “iPhone Storage”.
    • 4. Follow the directions to unload apps or upload your entire library to iCloud.

    If your iPhone doesn’t have enough memory, we have Tenorshare iCareFone to transfer music, photos, videos, contacts, SMS without limits. It is a tool to create backup and restore data selectively and instantly.

    Restoring iPhone with iTunes after iOS 12 Update

    iTunes can help you with these situations. You can always use iTunes to enter recovery / DFU mode and fix the problems. For example iPhone freezes, black screen on iPhone but it works. sensor or microphone does not work on iOS 12. You can restore your device using iTunes. If your phone is still working, you must sync your data first.

    • Connect iPhone to the computer that was syncing and open iTunes.
    • Wait while iTunes syncs iPhone and backs up.
    • Once the backup process is complete, click “Restore iPhone”.
    • When in the course of restoring iPhone, the setup screen should open, where you need to click “Restore from a copy of iTunes”. After that, you need to select your own device in iTunes. Look at the creation date and size of each backup and choose the one that suits you best.

    If you have never synced your iPhone with iTunes, I will note that this method always works, but all media and information will be erased on the iPhone. Connect your iOS device to your computer and open iTunes, make a forced restart, select “Restore”.

    It is worth noting that this method takes a long time and has a low success rate or the iPhone does not turn on and does not work at all.We recommend using Tenorshare Reiboot to restore iPhone / iPad / iPod.

    What to do if iPhone won’t turn on after iOS 12 update

    This year, Apple developers made us happy with the release of iOS 12. For now, the beta version is available to users, which is in free use. The release version will be presented in September 2018. The beta version, as a rule, is intended for developers in order to check the functionality of the system and get information about the work. as well as about its improvements. But as with many beta versions, the installs experience errors that disable the operation of the iPhone. For example, an apple is on, the iPhone does not turn on. iPhone is frozen. In this article, we will analyze all the effective ways to restore iPhone operation after updating iOS 12.

    Reliable tool. if iPhone won’t turn on after iOS 12 update

    If your iPhone won’t turn on after iOS 12 update, then Tenorshare ReiBoot is the ultimate solution for you. This tool offers a 1-click solution for such problems (iPhone won’t turn on, iPhone stuck on apple, iPhone doesn’t work, black screen on iPhone but it works, etc.) that occur in iPhone, iPad and all Apple devices Here are the steps to follow if your iPhone has turned off and won’t turn on.

    • 1. Download, install and run the program on the computer, connect the iPhone using the original cable.
    • 2.Click the “Solve All iOS Freezes” button in the main window to enter System Restore.
    • 3.Click on Fix Operating System. This will put the device into recovery mode.
    • 4. Download the latest firmware package by clicking “Next”. After downloading the firmware, click “Start Repair” and restore the system. This process takes less than 10 minutes, you cannot turn off the device in this process.
    apple, does, turn, iphone, update
    • When the recovery process completes, your iPhone will automatically restart and there will be no more error on iPhone.

    Important: Check if there is a hardware problem with your iPhone

    If none of the above solutions helps, chances are that you are experiencing a hardware failure in your hardware. Broken screen or loose connection can also lead to iPhone hardware issue. Also, if you’ve replaced your damaged hardware with an unauthorized one, such as your screen, the new update may not support your device. Therefore, you need to contact your nearest Apple Service Center.

    Table of Contents